Resume - I am currently working in an Offshore Vessel as an Electrician. I've worked exp...

Misco Jobs

Resume #31198

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES: To have a challenging, rewarding and promising job as an Electrician.

Work Status: Currently employed in an Offshore Vessel.

EMPLOYMENT HISTORY:
September 2006 to Present GPS Saipem ENI Group
(Platform & Pipe laying Offshore Project)
Saipem DLV (Derick/Lay Vessel)
Castoro Otto

Position: Electrician)

* Synchronizing Powered Diesel AC Generator with PLC control rated 4200 HP, 5.5 KV for Vessel Power Supply.
* Monitoring MW Meters (Active Power), Excitation Current, Stator Current, RPM, instrument temperatures & pressure sensors.
* Hands-on trouble shooting of AC Generators and maintenance of electrical controls and other equipments such as Steam Boiler, Evaporator, Air-compressors, Bilge pumps, Actuator valve magnetic sensor, Incinerator, Fire pumps, Fuel transfer pumps, Water feed pumps, Oil & Water Separator, etc.
* Calibration of Pressure Switches.

February 2004 – Present Al-SUWAIDI INDUSTRIAL SERVICES
Project assigned to Saudi Petrochemical Company
(SADAF/ SABIC)
Location: Jubail, Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Hands-on trouble shooting and maintenance of electrical controls and its electrical equipments even on hazardous location such as Industrial motor AC/DC.
* Performed Preventive Maintenance with Lockout/Tag-out (LOTO) procedures on motor control panels. Including MCC's, Switchgears, Motor Starter Breakers, UPS batteries & its chargers. Subsystems lightings and other control panel boards.
* Assist Engineering Utility personnel during trouble shooting and preventive maintenance of medium and high voltages e.g. 4160 V & 13.8 KV especially during turn around or shutdown activities.
* Performed functional testing in coordination with Instrument Technicians.
* Performed calibration using a current injector on overload relays and contact resistances testing. Also using Surge Comparison Tester, Megger or Insulation Resistance Meter and Multi-tester.
* Experienced on Variable Frequency Drive (VFD), SCR, PLC installation, Power diesel Generator and Motorized Operated Valves (MOV).
* Performed other related duties that maybe assigned from time to time.

July 3, 2001 – August 21, 2002 URBANA 2000
Project: Chevron Texaco (Oil & Gas)
Location: Malongo, Cabinda, Angola Africa
Position: (Industrial Electrician)

* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Hands-on troubleshooting & repair of electrical equipments.
* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Perform disassembly, inspection, repair, reassembly, adjustment, testing and calibration of electrical equipment and systems in accordance with pertinent technical manuals, drawings, manufacturer's specifications and standards.
* Diagnose and troubleshoot electrical problems.
* Requisition of necessary spare parts, tools and materials.
* Maintenance of low, medium voltage switchgears and breakers and cathodic protection systems.
* Ensure that all protective and emergency systems are functional and that all tasks are performed in accordance with pertinent electrical safety standards.
* Compliance with Common Maintenance Strategy (CMS).

November 1998 – June 2001 JTL CONSTRUCTION
Project: House & Building Wiring Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, Threading/bending of pipes
Such as Emt, IMC and RSCP.
* Install power Panel board, Junction/utility box, pull box, isolator switch, breakers,
Convenience outlet, switches and service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

February 1997 – October 1998 METITO ARABIA INDUSTRIES, LTD.
Project: Water Treatment Plant & Sewage Treatment Plant.
Location: Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Erection of sewage & water treatment plant (reverse osmosis)
* Lay power cable; install cable tray/gutter, threading/bending of pipes, wiring & Installation of main & local control panel boards.
* Install float level switches, control panel boards high pressures pump, aerator pump, control valves, membrane & ultra violet ozone machine.
* Erection of raw water tank & potable water tank
* Loading Media filters inside the tank with large gravel# 203, medium gravel#197 small gravel #193, course sand #210, fine sand #207 & carbon.
* Project commissioning
* Housekeeping after each work

August 1996 – January 1997 ENGINEERING EQUIPMENT, INC. (EEI)
Project: Servicing/Maintenance
Location: Philippines
Position: (Industrial Electrician)

* Repair/maintain electrical equipments such as AC Diesel Power
Generator Mobile, DC Welding Generator & Air-compressor
* Do preventive maintenance as per schedule
* Render technical service to the client.
* Do house keeping.

March 1995 – September 1996 WILSON CONSTRUCTION
Project: Building Wiring & Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, threading/bending of pipes such
As Emt, IMC & RSCP.
* Install power Panel board, junction/utility box, pull box, isolator switch, breakers, Convenience outlet, switches & service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

July 1993 - February 1995 RIYADH DISTRICT WATER &
Project: SEWAGE AUTHORITY
Riyadh Sewerage Operation & Maintenance
Location: Kingdom of Saudi Arabia, Riyadh
Position: (Plant Maintenance Electrician)

* Obtained work permit prior to commence the work.
* Perform maintenance works on different stations of sewerage plant which Includes troubleshooting/repair, disassemble/assemble of 3 phase motors & Wiring installation.
* Assist Senior Electrician in heavy repairs of High and low-voltage switch gear & Air circuit breakers for industrial application.
* Also assist in synchronization of large AC Generator rated 2 MW.
* Do housekeeping after each work.

January 1992 – May 1993 AL-THINAYAN EST. (K.S.A.)
Project: Maintenance & Servicing
Location: Al-Qassim, K.S.A.
Position: (Pivot/Electrical Technician)

* Erect & install Pivot irrigation system.
* Repair & trouble shoot Pivot irrigation system and its electrical control system.
* Render technical service to the company's clients.

December 1990-December 1991 NEWTON ENGINEERING CORP.,
Project Maintenance & Servicing
Location Novaliches, Quezon City
Position (QA/QC & Service Technician)

* Perform series of testing/Check-up of Ac/DC motors, generator &
Transformer subject for repairs & evaluation.
* Use surge comparison tester, Hipotronic, vibro tester, Galvanometer, Megger or Insulation resistance, multi tester, temperature monitor, tacho meter, growler & Polarity tester.
* Conduct no load testing, current check, temperature, etc., for final evaluation of newly repaired motors.
* Render technical service to the clients.

EDUCATIONAL ATTAINMENT:

ELEMENTARY Banlat Elementary School
Date Graduated 28 March 1977

HIGH SCHOOL Pasong Tamo High School
Date Graduated 26 March 1981

COLLEGE FEATI University
Date Graduated 27 March 1985
COURSE Associate in Electrical Engineering (A.E.E.)

TRAININGS & SEMINARS ATTENDED:

May 3-9, 1992 Technical Service Seminars
Sponsored and Conducted by Valmont Industries Inc. USA

July 3-6, 2000 Personal Safety and Social Responsibilities
Conducted by National Maritime Polytechnic

October 28, 2003 Fall Protection and Ladder Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 4, 2003 Control of Hazardous Energies
Safety House V.V. Soliven, San Juan, Metro Manila

November 5, 2003 Basic Electrical Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 19, 2003 Confined Space
Safety House V.V. Soliven, San Juan, Metro Manila

November 22, 2003
1) Fire Safety
2) Hazardous Communication
3) Advanced Chemical
4) Manufacturing Ergonomics
Safety House V.V. Soliven, San Juan, Metro Manila

March 19, 2004 Permit Work Receiver
Conducted by: Saudi Petrochemical Company
Jubail, Saudi Arabia

January 2005-April 2005 Reflexology Seminar (Scientific Massaging)
Conducted by: Mr. Ramon Garcia
Jubail, Saudi Arabia

CONTACT PERSON IN CASE OF EMERGENCY:
Upon request

CHARACTER REFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8951 to 9000 of 10917)

Go to Search Parameters...

Brief Description

Skilled computer Technician/Technical Support/Trainer Especially Windows Office Suite

Exploration, Prospecting,Quality Control,Mapping,Surpac Mine Planning software, survey & Autocad

Dynamic, creative, and results-driven Materials Management Professional with a total over 18 years of experience.

My qualifications include City & Guilds Chemical Plant Operation, ONC & HNC Mechanical & Production Engineering. Refinery Operations/Commissioning/Planning/Inspection and Safety roles

Site manager, mechanical engineer, construction manager

Contract Administration, Cost Control, Project Control, Budget, Bid Qualification, RFP Preparation, Bid Evaluation, Pre-Qualification, Pre and Post Award, Insurance Qualification

Looking for Autocad Draughtsman civil with a growing company that would enable my profrssional development.

BSc, of mechanical engineering and working on HSE field in oil & gas industry onshore gas site and perform all job responsibilities on field and office basis

Wide and varied technical experience in Engineering Project control services combined with excellent personal, customer facing and communication skills. Currently a member of the Project Control team responsible for the Planning / Scheduling, reporting, forecasting, and analyzing and recommendation

Geologist Engineer: Abble to work as an exploration geologist, mining geologist, environmental geologist

I am a certified electrical engineer with 15 years experience

As an, QC/ R&D Professional in Laboratory & Process areas with 17Yrs of Extensive experience in Plant operation, Chemical analysis by classical & instrumental methods in chemical, cement ,Ores , minerals, Ceramics Refractories & Metal industries ,wishing to work with the professional

Computers and Automatic Control Engineer

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Electrical Engineer/Manager in Petrochemical Industries and Electrical Power Companies in Testing, Commissioning, Design, Projects, Plant Engineering, Maintenance, Operation, Technical Services, Training. Developement, System Improvements, Problem Solving, Analysis, System Study, etc

Well-rounded background in planning and scheduling. Experienced user in project control software applications such as Primavera P3 and Microsoft Project. Extensive knowledge and experience in all Microsoft Office applications. Adept at analysing detailed low level project control data and trans

Very experienced Welder, Pipe fitter, Foreman

Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager

A multidiscipline Engineer with over fourteen years experience within the petrochemical, Oil and Gas industry. I have extensive hands on experience on a variety of machinery and have managed multi ethnic; multi disciplined teams on a variety of jobs. I can work to strict timescales and budgetary con

I have over 16 years experience in Health, Safety, and Environmental (HSE) and have 4 years experience working overseas with employees from various cultures.

Operations, Purchasing, and Sales Manager

mining foreman and operator: 11 years experience; Mine operator Certification; Miner's Safety Training Fire and Aide Crew; Emergency Medical Technician; Experience running hydraulic excavators, motor graders, bull dozers, front end loaders, electric shovels, etc...surface mining

Good manager- exact-lovely-like travel-profetional in supporting in surface and tunnel excavation-english and arabic and farsi -hard worker

22 years heavy equipment operator

Inspection, Record Keeping, Supervision, Lighting, Fire Alarm and Communication Installations in all the buildings, Cable pulling/arrangement/terminations, Panel Installations, Cable tray and Assorted Fabrications, Piping( PVC and Galvanized Steel), Pre and Post Termination Tests, Maintenances.

Experienced professional in Accounting

Piping Draughtsman with 2 years experience

Geologist with 5 years experiences, with a blend of strategic and operational experience in coal exploration, with the combination of hard skill in geological mapping and drilling with soft skill in geographic information system, geological database up to geological modeling.

Mechanichal Enginnering Diploma,AWS Certified Welding Inspector, Level 2 in RT,UT,PT,MT,VT

Piping Designer / Draftsman

College education and master's degree in civil and environmental engineering within the research area of construction engineering and management

Petroleum Engineering – (Exploration & Development) Diploma

Experienced with Electronic Flow Computers along with having the basic knowledge of gas chromatographs, samplers, moisture analyzers and ultra-sonic flow meters. Along with experience installing and troubleshooting 900 MHZ, cellular, microwave, satellite and two-way radio systems.

A highly motivated individual who strives for success. Detail oriented with limitless learning capabilities. Capable of working under stressful measures while always committed to meeting deadlines. Exhibits strong leadership abilities.

Dear Sirs, i want to find any job possibilities with your company

I am looking for full time employment in a general labourer capacity

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.

Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.

Completion - Well Testing supv, Wireline logging engineer

Good understanding of power/load calculation, drawing of wiring diagram, trouble shooting, installation of electric motor, contactor circuit, transformator and PLC

Sales, Marketing,Business development,Automobiles, Spare Parts, Lubricants, ,Pipes, Construction Machinery,Trucks Concret Pumps, Tyres etc.

HSE 6 years experience in the field of oil and gas industries, petrochemical industries :operation and construction .worked as COW ( control of work coach ) , PERCO (Permit To Work Coordinator ), safety Advisor , And Safety Inspector Able to work in Site Supervision, preparing reports, coordinati

I am looking for a full time position within the oil and gas industry preferably as I am studying land administration in school.

10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting

Over Two years of experience in Petroleum Refining & Downstream process, and Chemicals in the Field of Continuous Process plant Operations as a Asst. Manager and Shift Feild Engineer, Troubleshooting of process and equipments handling, vendors co-coordinating, and Commissioning and Trunaround Exp.

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares

Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

Engineering

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 [ 180 ] 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out