Resume - BSc in env. MSc in safety eng.

Misco Jobs

Resume #31234

CONTACT INFORMATION:
View contact information...

Discipline: Safety, Fire & Env.

To: HR Division

Dear Madam/Sir.

Please find enclosed and attached a copy of current my C.V. for your database.
I am at present employed by NDC (Abu Dhabi – UAE) as Safety Engineer and I was working with AGIP Oil Company in oil & Natural Gas Liquefaction plant.
I would be grateful if you would consider me for safety position that you consider compatible with my qualifications and experience.

DISCIPLINE: Safety, Fire & Env. Engineering.

QUALIFICATIONS:
- Master in Reliability & Safety Engineering.2000 – 2003.
- B.Sc. In Environmental Technology Engineering Studies.1986
- Certificate In Safety, Health And Hygiene.1990
- Certificate In Management.1994
- General Technical Course.

EDUCATION:
2000-2003 Mphil(MSC) in Reliability and safety Engineering. Heroit-Watt University-U.K
1993 - 1994 Strathclyde University, U.K.
1989 - 1990 Aston University, U.K.
1983 - 1986 High Institute Of Technology.B.SC Libya

COURSES ATTENDED:
1. I have MPhil in Reliability & Safety Engineering from Heroit-Watt University. At the same time I attended all the courses of MSc safety & reliability engineering which include the following, Reliability engineering, human factor, system reliability, fire engineering, safety process, environmental sciences, structural reliability, safety management. The title of my research is Risk analysis, safety design and reliability Engineering in gas process system. I am using software called MAROS (maintainability, availability, reliability, operability & Simulation)

2. The Arab Academy for Science and Technology and Maritime
Transport (1997 - One Month)
Oil Pollution and Environmental Protection Course.
Consisted Of The Following:
Introduction of Environmental, Oil pollution, Air & Earth pollution, Law- Environmental and Affective of the pollution.

3. Strathclyde University, (1994, Three Month)
Studies In General Seminars for International Group of European Companies - Subjects: -
- Gas Turbine.
- Safety Systems.
- Process Control.
- Compression System.
- Gas Operation.

4. Strathclyde University (1993 - Six Months) General Management &Technical Course, Consisted Of The Following:
English Language (Passed I.T.E.L.S. Examination), Computer Applications, Mechanical Materials, Electrical, Safety & Health
Gas Process, Control Process and Budgeting Management.

5 Aston University (1990-Six Months).
Certificate In Safety - Health And Hygiene. U.K.
The Course Consists Of The Following.
Safety Course:
Basic Fire Fighting Course, Fire Control Course, Safety Engineering, Materials Defect, Risk Analysis, Radiological Protection, Safety Management, Environmental Studies
Risk Assessment, Hazop, Safety Audits, Safe Handling of Explosives, First Aid, Corrosion, Mechanical and Electrical.

Practical Safety Inspection Course (4 Weeks) With Plant Safety Company at Manchester City.

6 Safety and Survival Course. For two weeks in Rotterdam- Holland. (26/07/04 to 06/08/04)
7 Several Of Local Seminars - In the following topics.
Safety:
* Principle Basic Safety Course.
* Mechanical & Electrical Equipment's In Hazards Area.

Computers:
* Introduction Of Computer
* Windows
* Excel
* WinWord
* MAROS software – maintainability, availability, reliability, operability & simulation.
- Technical English Language Course (Three month)
- Employee assessment course.

EXPERIENCES:
- AGIP Company (NAME), Safety Specialist & Safety engineer.
Employed by the Agip Oil Company (NAME) in Abuattiful oil field in Libya from

1986 until 1993, I have total responsible of foremen for three locations. Also was appointed to evaluate and assess the fire fighting systems and area classification for
N.G.L plant in Italy, under construction at Abuattiful Field in Libya.
- AGIP Oil Company, Safety Engineer

1994 - Appointed as a Safety Engineer at the N.G.L plant, then safety supervisor section for the N.G.L.

- 1996 - Safety and Environment coordinator and Acting Safety and Environment
Superintendent at Abuattiful Oil Field District responsible for R/82, OO, UU fields and NGL Plant.

- I finished the MPhil in Safety & Reliability Engineering at Heroit-Watt University. The title of my research is risk analysis, safety design & reliability engineering (Reliability, risk analysis & fire engineering) and take existing NGL plant as case study. See the abstract below.

Now:
Now, I am at present employed by NDC (Abu Dhabi – UAE) as Safety Engineer I was working in main office of AGIP Oil company, following up the new projects in company and provide comments regarding safety and environmental.

Job Responsibilities And Duties:

During field positions.
- Work permit system.
- Inspections, hazards identification, risk assessment, monitoring and control skills.
- Organisation & co-ordination.
- Personal training & motivation. (Fire fighting training, breathing apparatus and safety orientation).
- Emergency plan team, training and practical exercises.
- Accident & incident investigations.
- Safety statistic & reporting.
- Preventive maintenance program for fire, safety system & equipment preparation and implementation.
- Control of maintenance activities.
- Compile safety records.
- Training programme.
- Preparation and attend safety meetings.
- Compile and implement chemical handling procedures.
- Prepare and control the safety budget.

During the Headquarter position.
- Prepare and Review scope of work for EBS & EIA study.
- Prepare scope of work for waste management system study.
- Review HSE plan for many Projects (Enhanced oil recovery EOR, New compressor in plant, New Pipeline and etc)
- Review and follow up new pipeline projects, enhanced oil recovery and oil field low pressure project from safety & environmental viewpoint.

Teaching (part-time).
- Teaching at the higher institute of safety, health and environment. Libya.
- Teaching at the Petroleum University – Safety subjects.

Positions & Responsibilities:
A/100 Abuttifuel oil Field co-ordinator & Acting Loss prevention Dept. Superintendent- at Abuattiful Oil Field District responsible for A/100, R/82, OO, UU fields and Natural Gas Liquefied plant (About 60 employees).

Abstract:
Abstract of the my Mphil research

This research is being carried out to improve the safety and reliability standard in the gas and oil industry. The LNG plant in Libya was taken a case study. The overall aim of the project is to undertake a comprehensive, integrated reliability and safety analysis, to reduce the likelihood of major industrial accidents from occurring, to minimise the consequences of a major industrial accident; and to ensure appropriate emergency planning procedures are in place.

The research is being undertaken in the following stages. The reliability of the plant is being modelled using the commercially available, maintainability, availability, reliability and operability simulation (MAROS) system. This is a discrete event simulation software package, developed primarily for the offshore industry that can be used to model the reliability, availability, and maintainability of any process system. This has been used to model the whole LNG plant using data from OREDA (Offshore Reliability Database) and from Agip (existing LNG), the plant's operators, as inputs. The differences between these databases, and the corresponding simulation outputs, are discussed. These outputs have provided estimates of plant reliability/ availability and helped to estimate failure probability of safety critical components. The simulation only considers the performance of the plant's equipment and does not deal with the behavior of the product and the chemical-process related issues. These have been addressed through a HAZOP study undertaken in conjunction with the operating staff.

The HAZOP study has allowed the identification of safety critical aspects of the plant where failures could lead to fire and/or explosion. Estimates of the probability of the hazards identified in Hazop occurring are found using fault trees.

Event tree analysis is then used to find the effect consequences on equipment, plant, neighbours and human operators. The modelling used for fire and gas explosions is described together with the assessment of their consequences. The reliability simulation output, the HAZOP study and fire and explosion of gas are thus combined with the fault trees and event trees into an integrated safety analysis and assessment for the LNG plant.
Finally, the risks are assessed and recommendations made for changes in operation and emergency procedures, and changes in maintenance procedures.

LANGUAGES: Spoken Written
Arabic Excellent Excellent
English Good Good
Italian Fair None

DRIVING LICENSE:
Libyan
International

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 10903)

Go to Search Parameters...

Brief Description

Highly skilled and client motivated commissioning/operations technician able to work to Superintendent level and oversee many different nationalities of staff.

Drilling Supervisor for past 3 1/2 years with previous experience on Contractor side as a rig manager. I am motivated, knowledgeable and organized as a Drilling Supervisor. I have very good people skills and expect the best of people I work with.

Instrument & electrical design and field work

Sr. piping designer/checker, total 21 years experience in oil and gas field

Autocad, Bentley AutoplanXP, Navis Works, Isogen, Excel, Access, Word

Reservoir engineer - Experience in tight sands and shale and CBM

I’ve been in the oilfield for over 20years and have worked my way from the bottom to my present postion as driller , I have well control card and forklift and manlift certificates and valid passport, I’m looking for a company to excel with . At your convenience i'd like

SENIOR DRILLING SUPERVISOR/OPERATIONS MANAGER/ DRILLING MANAGER

34 years in oil industry, toolpush and wellsite supervisor

I have more than 10 years of maintenance experience as an instrument technician

Adaptable, Senior Procurement specialist with international experience in Europe, Middle East and the FSU, with EPC’s, operators and service companies. A buyer, with experience of procurement procedures, expediting, inspections, shipping (incoterms) & customs. Knowledge of sulphuric acid plant procu

Visionary professional with 11 years Operation experience in Oil and Gas plant, Petrochemical and Cryogenic plants

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading

BSc in env. MSc in safety eng.

Oil and gas economics manager

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Iam seeks job for Procurement / Material coorninator

Field Engineer

dcs panel operation for terminal and plant

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

Sale and marketing experiences.

Comprehensive experience in contracts management and projects management, construction management, mechanical, maintenance and operations management, mainly oilfield and production plants.

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

Safety Engineer/Professional

Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation

7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD

Oil and Gas Production Operator, Lead Operator, workovers, Construction,inspections, repairs, trouble shooting, meter calibration, azcom, Hazmat, Confined spaces, Firefigting, water susvival, T-2, Dot, elicopter afety and fueling

SHOP FOREMAN, CVI CERTIFICATION, LEAD HAND, HEAVY DUTY MECHANIC, PARTS AND INVENTORY, HEAVY DUTY EQUIPMENT PM SCHEDULING AND MAINTAINING DATABASE OF FLEET

I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.

Well Service / Wireline / Snubbing / Workover Supervisor

I have a good management skills and experiences in various areas of operations. I am particularly aware of the Operation / construction / Commissioning and start up for Oil and Gas industries.

Rig mechanic/heavy machinery mechanical fitter/aircraft mechanical ground engineer can do any thing.

Over 18 years of combine experience in Oil and Gas mostly in Engineering Design projects from FEED to Detailed design for Offshore and Onshore projects, Subsea structures, Structural Piping design, Mechanical, Electrical and Civil work, and other similar structures and equipment details, assemblies

Field & office design, using PDS program, review drawing before send to approved

Senior instrumentation and controls maintenance. Commissioning Supervisor specially

Procurement Buyer – at Snamprogetti Romania a company of Saipem Responsibilities: - responsible for the process of Liquidated Damages

Senior workover & completion operations supervisor with 7 years experience in HPHT oil wells in different workover activates, gained master degree in petroleum technology, BSc degree in Petroleum Engineering & recently warded IWCF certificate drilling supervisor level.

SUMMARY OF EXPERIENCE Eleven (10) years of very sound technical proficiency as a “Sr. Piping Designer / Draftsman”in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area’s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping s

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out