Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #32250 next resume »»
CONTACT INFORMATION:
View contact information...

I am an Instrument Engineering Technologist with valuable experience in construction, commissioning, and maintenance of oil and gas facilities. As an Instrument Project supervisor, and Commissioning coordinator I have gained valuable management and personnel skills and possess a good technical aptitude of the field of instrumentation. Previous employers will affirm that they entrusted me with major responsibility and that I adapt well to change. I look forward to new challenges and strive to be the best at what I do. I enjoy working in a team environment where safety and professionalism is of the utmost importance. Working on the Syncrude UE-1 up grader expansion, I had the privilege to work along side professionals from many different nationalities and enjoy this very much. I am married to Thai national and am seeking international employment which will allow me to live and work out of Thailand.

EMPLOYMENT

11/04-Present Commissioning Coordinator, Emerson Process Management
Syncrude UE-1 Project, Ft. McMurray, Alberta

Commissioning Coordinator for the power plant and water treatment plant DCS modernization. Modernization involves the upgrade from Fisher Provox platform to Honeywell Experion platform. Modernization involves verifying the existing I/O to the new Honeywell Experion platform prior to swing over.

09/03 – 11/04 Instrumentation Maintenance, PowerComm
Hardisty, Alberta

Contracted full time to Gibson Energy, where I perform maintenance for their Pipeline Terminal, Pipeline Pumping Stations and Fractionation facility. Research, provide quotes, and purchase all instrumentation devices and systems. Troubleshoot and Program Allen Bradley PLC systems such as SLC 500 and PLC 5. Calibrate, troubleshoot, and maintain plant analyzers such as Gas Chromatographs, Online Solartron Densitometers and Viscometers, and water in oil analyzers. Gained experience in Telvent Scada systems and Omni flow computers. Commissioning and start up of new plant projects. Provided procedures and updates to Maximo maintenance system.

04/03-09/03 Instrumentation Project Supervisor, PowerComm
EnCana High Ethane Recovery Project, Empress Alberta

Overlooking and managing all aspects of instrumentation calibration, installation, and
Quality Control. Commissioning and start up support.

10/02-06/03 Communications Commissioning, PowerComm
Shell Scotford Upgrader, Fort Saskatchewan Alberta

Revised and commissioned Modbus RS-485 communications for Electrical Heat Trace panels throughout every unit. Worked in conjunction with Colt Engineering to review Allen Bradley DeviceNet communications installation and present problems and solutions to network problems. Added a PC interface for each Allen Bradley DeviceNet network. Provided Instrumentation and electrical support to plant maintenance staff.

05/02-10/02 Instrumentation/Electrical construction and commissioning, PowerComm
Enbridge, Kirby Lake Compressor Terminal Project.

Installation and commissioning of both instrumentation and electrical systems. Performed all communications installation of modbus communications for Multilin high voltage relays and Rotork valves. Terminated PLC cabinets and other electrical devices. Involved in plant startup and commissioning.

04/02-05/02 Instrumentation Construction, and Commissioning, PowerComm
CNRL Wolf Lake Tank Farm Project, Bonnyville, Alberta

Installed, Calibrated, and Commissioning of all instrumentation. Gained some valuable experience with Endress Hauser radar level transmitters, as well as Fisher Provox.

10/01-04/02 Instrumentation Maintenance, Construction, and Commissioning, PowerComm
Husky Oil, Lloydminster, Alberta

Managed all aspects of instrumentation calibration, installation, commissioning and start up for Husky Oil Celtic Steam Pilot project. Gained valuable experience in steam generator control. Commissioning and start up of Husky Oil Lashburn Treater Project. Performed different maintenance tasks for a variety of Husky sites.

05/01-10/01 Instrumentation Calibration and Construction, PowerComm
Williams Energy Polypropylene Project, Redwater, Alberta

Performed over eight hundred calibrations for a wide variety of instrumentation. Performed construction tasks such as running tubing bundle and mounting instrumentation.

02/01-05/01 Instrumentation calibration and control valve repair, PowerComm
Edmonton, Alberta

Performed calibrations for a wide variety of instrumentation. Rebuilt a wide variety of Fisher control valves and associated Fisher products.

EDUCATION

03/04/2003 Instrumentation Technician Journeyman
Alberta

01/06/1998 Instrumentation Engineering Technology Diploma
Northern Alberta Institute of Technology

28/04/1995 Accelerated Pre Technology Diploma
Northern Alberta Institute of Technology

27/06/1994 High School Diploma,
GHP Primeau, Morinville, Alberta

CAPABILITIES
* Speak Thai and French
* Experience with numerous computer programs
* Good management skills
* Learn quickly and enjoy learning
* Can deal with high stress situations

CERTIFICATION
* RSLogix Training
* Omni Flow Computer Training
* Interprovincial Certification
* H2S Alive training
* Emergency First Aid Training

View contact information...
«« previous resume next resume »»
Search Results (Resumes 9401 to 9450 of 9787)Go to Search Parameters...
Brief Description
Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer
Instrumentation Supervisor
Repairs, servicing, maintenance of electronic systems
GIS Analyst
B.E CHEMICAL with 2 yrs experience in Project
Leadership & teamwork, work organization, Ability for learning any new software
Mechanical eng+Piping+HVAC
Detail oriented Instrument and Controls technician seeking international opportunities
Established track record with 6 years of experience in helping organizations to efficiently use their networks; ensuring that the design of an organization's computer site allows all of the components, including computers, the network, and software, to fit together and work properly.
Technical Writer/ Instructional Designer
Motor equipment operator class b cdl, teamsters local 317, past operating engineer union member
B Tech in Mechanical Engineering and having Experiance in Process Piping Design
As an Engineer I have develop my skills in team motivation, public relation, Product Designing, Project & Product Management etc.I am known for meeting deadlines, following through commitments, being well organized etc.
2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.
Analytical skills to perform analysis of project costs and approaching problems, uses well thought out solutions. Prioritization of time management to ensure that project reports are timely compiled. Workload is managed effectively within deadlines. High level Excel user. Specializing in InControl
Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department
Sdw
BEng Hons., Naval Architecture & Ocean Engineering, University of Glasgow, Scotland
International Safety / Risk Professional available for fulltime or contract employment.
A Dedicated Occupational Health & Safety Professional and Certified Safety Trainer
12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.
I would like to apply for a position where I can use my extensive experience in Managing, Coordinating, Supervising, Inspecting and Maintaining and my dedication to quality in Systems installation, Electrical engineering, Maintenance and Repair to help you obtain your company's mission.
Hving nearly 8 years experience in the continuous Petrochemical, Fertilizer plants and
Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.
Journeyman Instrument Technician with 7 years experience in the oil and gas industry
Chemical/Natural Gas Engineer
As for my educational qualification, I wish to state that I am a Diploma holder in civil engineering. I have completed AutoCAD 2000, Architectural Desktop R-3, Structural Analysis & Design(GT STRUDL), MicroStation SE. Photoshop 5.5
Education: M. Sc., Chemistry, Specialisation: Heterogeneous Catalysis; Work experience (current occupation), Researcher, Subject: Preparation supported metal catalysts, Goal: Development self-invented technique; International experience: Manager & windsurf instructor, Aruba, Dutch Antilles
Academic Qualification
Doctorate of Chiropractic Medicine, B.S. Anatomy & Physiology, B.S. Health & Wellness w/ toxicology minor, 112 of 120 hrs towards B.S. Biology/Analytical Chemistry Degree
Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.
Livelink Administrator, Causeway Collboration Administrator
B.E in Mining Engineering (1999-2003) from National Institute of Technology Karnataka, Surathkal (formerly KREC, Surathkal) DEEMED UNIVERSITY with 58.5% aggregate.
Highly motivated, creative and an energetic self starter. Ability to work effectively with others as well as within a foreign environment with limited resources. Committed to the highest level of professional and personal excellence.
First Class Honours as a Master of Geology from the University of Leeds. I am now interested in pursuing a career in the mining industry. I am hardworking, a team player, able to work in hostile environments and have developed outstanding time management skills.
Geologist - Planning - Production - Development - Drilling - etc.
Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer
Logistics/Shipping Coordinator with 6 years experience in an EPC company handling various oil and gas projects worldwide. Proficient in logistics operation, with good communication and negotiation skills and could lead a group of people in a project.
Maintenance Technician
Plant / Substations Operation, Maintenance and Testing
Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.
6 years in pipelineing and running heavy equipment
Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.
I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.
Seven years of hands on mining experience in surface and underground mining of rock salt, silica sand, high alumina clay (fire clay), and limestone
cnc edm machinist over 8 years of experience
HUMAN RESOURCES PROFESSIONAL
Comupter And Office applications, Microsoft word proficiency,Good analytical skills
Experience in EDP (Electronic Data Processing) for 2 year, Knowledge of System and Networking, I can learn the work easily in any industry ,any job regarding my Exp.
Objective: To gain professional experience and apply my knowledge on the IT and Telecommunication
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   [ 189 ]   190   191   192   193   194   195   196   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com