Resume - CSWIP Senior Welding Inspector

Misco Jobs

Resume #32596

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:

CSWIP Senior Welding Inspector (Grade 3.2), 2003
Certificate No. 9327 (expiry 23-03-2008)
The Welding Institute, Cambridge, United Kingdom

Registered Mechanical Engineer, 1981
Registration No. 21447
Professional Regulations Commissions, Philippines

Ultrasonic Testing, 1995
Certificate No. 127/UT/95
European Marine Contractors Ltd.
NDT Personnel Qualification Certification

Magnetic Particle Testing, 1995
Certificate No. 127/MT/95
European Marine Contractors Ltd.
NDT Personnel Qualification Certification

Ultrasonic Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Radiographic Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Magnetic Particle Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

Liquid Penetrant Testing, 1984
First Holdings International, Inc.
NDT Qualification and Certification

OBJECTIVE:
Growth Potential and career advancement which could benefit the company and myself

WORK EXPERIENCE:

McDERMOTT CASPIAN CONTRACTORS, INC.
Baku, Azerbaijan
July 17, 2003 – September, 2004
Senior Inspector (QC/NDT) A

Azerbaijan Int'l Oil Co.(AIOC)/British Petroleum (BP) Azeri Pipeline Project

Monitored front end activities of the pipelaying of 30 inch and 28 inch pipeline in offshore Baku, Azerbaijan (Azeri Phase 1) on the Caspian Sea including beach pulls were completed for the two lines onboard Pipelay Barge Israfil Guseinov and fabrication of Subsea Spools onshore. Involved in the Welding Procedure Qualification for Azeri Phase 2 Pipeline.

VELOSI / SARAWAK SHELL BERHAD
Miri, Sarawak, Malaysia
August 20, 2001 – October 7, 2002
Senior Engineering Surveyor/Senior Welding Inspector

M1 Platform Hook-UP Expansion Project

Worked as a Senior Welding Inspector on M1 Platform Expansion which involves the strengthening of the 100 meter bridge connecting the Production and Living Quarters Platform to the Riser (drilling) Platform, installation of Extension Panels on both platforms and installation of new piping systems.

Jintan Field Development Project
Involved from the formulation of the proposed Welding Procedure Specification (pWPS), Welding Procedure Qualification Test (WPQT), Welding Procedure Qualification Record (WPQR) and the Welding Procedure Specification (WPS), Welder's Qualification Testing (WQT), review of all pertinent documentation prior to the installation and during the installation stages of the projects.

E11R-B Platform
The work scope consist of installing a 32 inch riser with a external monel coated pipe at the splash zone area

JNDR-A & M1DR-A Platforms in offshore Sarawak area.
The work scope consists of installing a 7.634 km x 24 inch API 5L X65 grade carbon steel pipeline with a internal clad 4mm AISI 316L grade stainless steel between the JNDR-A to M1DR-A installation including risers and expansion spool.
M4 &F23SW Platforms in offshore Sarawak area
The work consists of two gas lines, a 12inch X 7 kilometers and a 14 inch X 10 kilometers, both are internally cladded with 3mm 316L stainless steel including installation of risers, expansion spool and PLEM.
- Witnessed the Welding Procedure Qualification Testing at the Serimer Dasa, Mitry Mory, France Welding Workshop, including the mechanical testing at the Institut De Soudure in France.
- Witnessed the Welder's Qualification Testing at Akra workshop in Seremban, Malaysia and onboard the pipelaying barges (DLB 264 & Kuroshio 2)
- Witnessed the Mechanical Testing of the Manual welding Procedure Qualification at PTS in Singapore.
- Reviewed of QC documentation prior to commencement of the projects.
- Monitored pipelaying activities on board the pipelaying barges.

ANDISON INDUSTRIAL SALES, INC. (Marketing and Sales Department)
Diego Silang St., Batangas City, Philippines
May 1999 to July 2001

VELOSI / SHELL PHILIPPINES EXPLORATION B. V. (Onboard PLV SOLITAIRE)
Alabang, Muntilupa City, Philippines
June 2000 to January 2001
Welding Inspector/Quality Surveyor

Shell Philippines Exploration B. V. is one of the proponents for the development of the Palawan Malampaya Natural Gas Project, it is the largest natural gas find in the Philippines to date and is expected to be on stream by the later part of 2001 and is estimated to produce 2,700MW power from the 3 Power Plants of Sta. Rita, San Lorenzo and Ilijan all in Batangas. The project is estimated to cost US$ 4.5B.

The project will deliver deep water natural gas to power plants onshore via two 30 kilometers, 16 inch inconel internally cladded pipelines thru a platform and thru a 504 kilometers, 24 inch pipeline.
- Maintained awareness of relevant Quality, Health and Safety Engineers requirements which includes proper housekeeping.
- Monitored the pipelaying and other related activities onboard PLV SOLITAIRE, which is a dynamic positional vessel capable of laying more than 7 kilometers of pipeline in a 24 hours period.
- Carried out and documented the visual examination of welding activities as to the conformance or non-conformance with approved standards and criterions.
- Monitored the Qualifications and Testing of other items related to the project.

THERMAL ARC PHILIPPINES, INC (Marketing and Sales Department)
Pelbel Building, 2019 Shaw Boulevard, Pasig City, Metro Manila, Philippines
April 1997 to September 1998

SAIPEM AG / EUROPEAN MARINE CONTRACTORS, LTD (QA/QC Department)
Badenestrasse 15, 8004 Zurich, Switzerland
March 1992 to December 1996
QA/QC Engineer

Worked onboard laybarges Castoro 6, Castoro 2 and SEMAC 1 in the North Sea, Mediterranean Sea, Gibraltar Strait and Irish Channel.

List and location of some of the projects I have worked

ROYAL DUTCH SHELL - North Sea
STATOIL - North Sea
CONOCO - North Sea
TOTAL PETROLEUM - North Sea
RANGER - North Sea
TRANSMED - Mediterranean Sea
NORSKE HYDRO - North Sea
BRITISH PETROLEUM - North Sea
CLYDE PETROLEUM - North Sea
BROKEN HILL PROPRIETARY(BHP) - North Sea
BRITISH GAS - Irish Channel
EUROMAGHREB - Gibraltar Strait

- Maintained awareness of relevant QHSE system requirements.
- Monitored welding operations thru visual inspections upon completion of welding and during repair.
- Reviewed, familiarized and identified all areas of responsibility contained within European Marine Contractors, Ltd. (EMC) quality plans, procedures and relevant client specifications.
- Carried out and documented inspections of welding, including:
- Fit-up, consumable storage/usage and pipe cleaning.
- Observance of welding parameters, reporting adverse trends to production personnel.
- Verified that welders and consumables are qualified/approved for the process.
- Verified weld repairs in accordance with the qualified weld procedure specification (WPS).
- Identified and reported nonconformity.
- Ensured all NonDestructive Testing (NDT) equipment including probes and calibration blocks, etc., is maintained in good working conditions at all times.
- Performed and documented pipe-end NDT (Ultrasonic Testing (UT) and Magnetic Particle Inspection (MPI) for lamination checks following cut-out and prior to re-welding) and informed the appropriate supervisor of the results. Examinations are reported on the correct proforma and presented to QC Supervisor.
- Additional duties within own experience and capability as directed by the QC supervisor.

ENGINEERING & CONSTRUCTION CORPORATION OF ASIA (Industrial Services Department)
Benpres Building, Exchange Road, Pasig City, Metro Manila, Philippines
June 1996 to March 1992
Manager-Industrial Services Department (ISD) (1987 – 1992)

ISD is the Quality Control Quality Assurance Department and is a profit center thus it must earn its revenue by delivering services to the construction department of the Company and to other companies that required its services. The Department is offering all methods of Non-Destructive Testing, Visual Examination and Post Weld Heat Treatment including Preheating Services.
- Managed 15 professionals including supervisors, a warehouseman and a department secretary.
- Was responsible for the Marketing of offered services to various companies including the three largest oil companies, power generators and large construction firms.
- Sustained the needed operating expenses of the Department and contributed largely to the overhead of the Company.

Head-Nondestructive Testing Group (1986 – 1987)
- Managed 10 professionals composed of engineers and technicians in the operations of the group.
- Conducted trainings and seminar to various companies and individuals seeking knowledge of the different aspects of Non-Destructive Testing, which was a revenue generating activity for the Company.
Note: I was seconded to ALKHAJA COOPERHEAT from FIRST HOLDINGS INTERNATIONAL, INC. then transferred to ENGINEERING CONSTRUCTION CORPORATION OF ASIA, the latter two being sister companies.

ALKHAJA COOPERHEAT (NDT Department)
United Arab Emirates
The Sultanate of Oman
April 1985 to April 1986

Administrative Assistant/NDT Inspector (1985 – 1986)
- Performed Non Destructive Testing, i.e. Radiographic, Magnetic, Dye Penetrant and Ultrasonic Testing activities to different clients all over the United Arab Emirates and the Sultanate of Oman
- Prepared the necessary reports and evaluation of the test results
- Maintained and repaired Non Destructive Testing equipment

FIRST HOLDINGS INTERNATIONAL, INC. (Skills Training Center)
7232 Malugay St., Makati City, Philippines
June 1983 to May 1986

Administrative Assistant (1983 – 1985)
The training center has several trainors in the field of Pipefitting, Heat and Ventilation Air Conditioning (HVAC), Welding, Insulation, Electrical and Plumbing.
- Supervised five professional office workers made up of secretaries, clerks, a messenger and a warehouseman.
- Attended meetings with the staff of the Vice President of the Company.
- Prepared all letters and memoranda of the office.

WELLTRADE (Saudi Arabia) LTD (NDT Department)
Mansour St., Al Khobar, Kingdom of Saudi Arabia
January 1982 to March 1983

Senior Radiographic Testing Technician
Reported to the General Foreman.
- Supervise 10 technicians and engineers in the performance of Radiographic Testing in the eastern provinces of the Kingdom of Saudi Arabia
- Performed Radiography on other special projects as required by the Company
- Trained technicians and engineers on the proper safety procedures and operations of Radiography equipment.
- Prepared reports and timesheets for billing purposes clients.

Industrial Inspection (International) INC (NDT & Branches Division)
Pasong Tamo St., Makati City, Philippines
October 1980 to November 1981

Radiographer/Technical Assistant & Training Officer
- Performed Radiographic Testing all over the Philippines.
- Prepared documentation and reports on the results of tests evaluation.
- Led other technicians in the performance of their job.
- Acted as the Radiological Health and Safety Officer of the Company as certified by the Course and Examination given by Philippine Atomic Energy Commission (PNRI now), which I was fifth of the class.
- Trained new employees in the basics of Radiography and safety in the performance of their work.
- Assisted the Division Manager in the preparation of technical matters.

EDUCATION & CERTIFICATION:

Bachelor Of Science in Mechanical Engineering, 1980
Mapua Institute of Technology, Muralla St., Intramuros, Manila, Philippines

CSWIP Senior Welding Inspector (Grade 3.2), 2003
Certificate No. 9327 (expiry 23-03-2008)
The Welding Institute, Cambridge, United Kingdom

Registered Mechanical Engineer, 1981
Registration No. 21447
Professional Regulations Commissions, Philippines

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7551 to 7600 of 9787)

Go to Search Parameters...

Brief Description

Roughneck/Derrickman

Experienced Equipment and Packaging Field Service Technician seeking a position in Technical, Mechanical, or Packaging Field.

Piping engineer with 10 years experience in oil field. Experienced in designing, supervising and construction of pipelines and piping for oil industry.

B Tech in Petroleum Engineering with expertise in Reservoir ,Production,Pipeline Designing & Transportation. GPA of 3.12/4.

An EXPERIENCED ELECTRICAL ENGINEER with 16+ years experience in Oil & Gas, Power and Desalination plant & Engineering Industries in the areas of Manufacturing, QA/QC, Inspection, Erection, Testing and Commissioning of Electrical Equipments.

I am an Instrumentation & Control Engineer by Profession. Review of my credentials will confirm that I have 15 years of experience in instrumentation, operations, maintenance & design.

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

Automation & Control System Engineer - PLC, SCADA, DCS, RTU, Software, Industrial Networking

PhD Offshore Dev.: Currently in Houston, TX helping in upstream equipment procurement; experiences with Oil Services Co. and in research/teaching petroleum engrg courses; had done reservoir/well modeling; fluent in English/Russian; available as an intl. Marine Surveyor (Inspector) trainee staff

I have geophysical data collection,data processing Geosoft,and erdas image processing ,microstation,photogrammetry,autocad

Bsc. Petroleum Engineering. Experience in HPHT Wells, currently working as a Junior Technical Manager in an oil & gas company in Singapore

Onshore and Offshore Well Testing /Production Operations. Writing Job Tickets and Service Reports. Sand Control on FPSO , Onshore and Offshore Production Rigs and Platform. Data acquisition (Edgex) and Report writing. Surface sampling. Welltest equipment maintenance.

Mechanical engr 3 + years exp in Sugar Industry/process industry

CSWIP Senior Welding Inspector

Diploma in Engineering in Electrical Instrumentation with 74.9% marks from ALIGARH MUSLIM UNIVERSITY (A.M.U.) in July 2000.Knowledge about the world class Manufacturing Practices (tools of TQM) like PFMEA, 7QC, SPC & MFO,Trained internal auditor for ISO 9001-2000 from QMI-INDIA

Professional formation in Petroleum Engineering with experience in Drilling Engineering. Wide knowledge in Drilling Software, planning, administration and control of Drilling Projects, SAP system, bid evaluation, and field operations. Languages: Spanish, English and German.

Skilled welder fitter, hard working level headed man who is ready to take on any task that is thrown my way. I am a fast learner and I m easy to get along with and I get along with others as well. I think I would be an asset to your company.

Free! Project Controls Specialist, Project Services Manager, Project Controls Manager, Cost Control Manager

Indutstrial Focused Nurse

Free! Warehouse exp looking for a change

A challenging position mutually beneficial and long term oriented career in Industrial Companies (Research Centers, Manufacturing Groups, Factories, International Agencies, etc.,) or an outstanding position in Administration leading to a carrier in International Business (Import & Export, Internatio

Hard working, punctual, personable, capable of heavy lifting.

At Real Estate Information Services Department, a division of Rattikin Title Company I supervised all the landmen and completed all the non-policy research for 9 years. I have superior skills in title using both a card plant and various courthouses. I also have 2 years experience leasing.

State of Alaska Licenced Journeyman

Deep knowledge in motor engines and auto-eletrical , eletronic Injection , and etc. I've got trade qualification as mechanic and deep background.

Coordinator Project, Site/Project/COnstruction Engineer, Cost Engineer and Project Management

Skilled Technician, Electrician. Instrumentation and Electrical cable Termination and Lube checking

Mechanical Maintenance of Refinery, petrochemical and Mining Equipments [Static n Rotary]

I&C Technician with broad experience

2D / 3D Design Consultant, 13 years Oil & Gas Experience starting with 4 year mechanical apprenticeship. Having worked in Aberdeen, Scotland and Oslo, Norway on surface and subsea production equipment (EDP, LRP, BOP, Xmas Trees, etc).

NDT & corrosion&welding engineer, participate in large project in Egypt and in Sudan

Total working experience 06 years. DCS operator with 06 years of diversified experience in the field of petroleum refining industry. Have been performing shift duties at Attock Oil Refinery, at Naphtha hydrotreator & Catalytic Reforming unit as Control Room Operator. Well versed with the

Bachelor of Science in Physics.truck license driving

Fresh Chemical engineer had an internship & training, had computer skills with many softwares, Fluent in English as Arabic, & he is looking to prove him self as a success engineer in challenging work.

I'm seeking a job especially through the export-import sector.

Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have recently been laid off because of lack of work . I appreciate your consideration and look forward to hearing from you. Sincerely, Doug McKay

Engineering Physics graduate looking for an entry level job: Environmental, ocean, weather, energy, gas, oil, R&D.

Instrument Technician

I’m a chemical engineer with 6 years experience worked as process engineer, operation engineer on a NGL plant

After 6 years of work at the world’s biggest oil refinery complex, I have obtained great experience in predictive, preventive and corrective maintenance of rotating equipments, machines start up and failure root cause analysis.

Civil engineer with six years experience in the oil & gas Industry. 1 1/2 years as buyer and 4 1/2 years as control projects Eng (planner, estimator, cost control, contracts administrator)

I am a graduated Electrical Engineer from a reputable university of Pakistan. (UET Taxila). & Throughout my studies, I maintained first class academic record overall. secured (84 %) marks in my final year Engineering. I want to serve your company as an Engineer.

A fresh graduate from the premier university in the Philippines, is geared to apply his extensive academic and research abilities to a company that requires passion, dedication and commitment to excellence from its entry-level applicants.

I am seeking a position in the field of Environmental clean-up. I would be an asset to your company because of the fact that I am a dedicated individual and recently obtained my bachelors degree in Management from the Indiana University School of Public and Environmental Affairs.

6 years experience of Project Management & Execution, Construction Supervision & Quality Surveillance in the Field of Power, Oil & Gas – Pipe Lines with confident communication and Planning Skills.

Applicant a BE chemical graduate to pass out in August 2003. Looking for a job in a chemical industry as a trainee or junior engineer.

This is my resume and my personal details

Ambitious, motivated and enthusiastic to achieve and excel, I am seeking a challenging position in a leading organization providing opportunities of career growth. although I have telecom experience I am ready to take an engineering management job in the oil industry.

Civil Construction & Contracts Manager

Experitse in geophysical surveys, geotechnical, hydrogeological investigations, environmental and engineering applications as well as software development using VB.

First Prev 151 [ 152 ] 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out