CONTACT INFORMATION:
View contact information...
I have experience in pre-commissioning, commissioning and start-up procedures (storage, loading/discharging ships, utilities units, oil stabilization, refrigeration, dehydration, DCS). Perform all commissioning tasks such as vessel inspection, flushing/blowing, reinstatement, leak test, drying and service test. I have experience in normal operations, ensuring that these are in line with the procedures.
SKILLS:
* Ability to work under pressure in a multinational environment or alone.
* Ability to understand any PFD's, P&ID's, mechanicals drawings, or other type of documentation in scope of work and using it;
* Sociable, communicative, flexible and well organized;
OBJECTIVE:
* I am interesting to gain the experience to achieve middle level of management in the next few years.
WORK EXPERIENCE
January 2006 – Present
Eni Gas B.V. (Libyan Branch), Bahr Essalam Fields, Sabratha offshore platform, Libya
Senior control room operator
* The platform is dehydration plant (2 trains) with high-pressure separation unit (2 trains) and gas recovery reciprocating compressor. On the condensate side, it is an export package formed by a booster and export pump.
* Responsible for all planned production actives on the daily plan ensuring delivery of the daily production targets which have the agreement of the Production Supervisor.
* Monitor of all plant parameters and instruct the correction for any plant abnormalities or malfunctions.
* Provide the expertise on all aspects of production process & utility systems including "problem solving & troubleshooting".
* Monitor and coordinate all activities related to PTW system.
* Training of local staff in all aspects of CCR duties
February 2005 – January 2006
Saipem SpA, Western Libya Gas Project – Sabratha Offshore Gas Platform, Libya
Commissioning control room operator
* Instrument loops checked and testing of PLC, ESD, DCS logic's for wellhead and sub-sea systems, gas turbines, compressors, dehydration system and others equipment's (pumps, fans, etc.).
* The capacity of platform is 24 MMSCMD raw gas and 6000 m3/d unstabilized condensate.
* Carried out for commissioning, Start-Up, normal operation and performance test of the units.
* Equipment used including gas turbine Siemens, Compressors by Ingersoll-Rand, reciprocating gas compressor Nuovo Pignone, TEG regeneration unit by Sices, DCS and FCS systems by ABB Automation software (Tenore Advance Process Management) with multi-loop digital controllers.
February 2004 – December 2004
JTS - Tecnimont SpA, Western Libya Gas Project - Wafa Coastal Project, Libya
Commissioning specialist
* Pre-commissioning activities as washing, blowing, leak test, inertization of line systems, test run of pumps, compressors, etc.
* Follow up of preparation for passivation/boil-off of steam boilers,
* Cool down task for storage tanks.
* Participated at commissioning of the equipments, functional test, test of ESD System for equipment packages and unit,
* Carried out of preparation and controlling of all pre-commissioning, commissioning and start-up document necessary for Hand-Over System as certification coordinator.
* Equipments used including gas turbine by Nuovo Pignone, compressors by Atlas-Copco, Myota, steam boilers by KTM, air separation unit by Linde.
September 2002 – February 2004
OIL Terminal S.A., Constanta, Romania
Shift deputy superintendent on Onshore Tanks Farm "PORT"
* The tanks farm has different type of products storage and capacity; it has ability to loading the ships directly from rail tanks.
* Supervised and verified the balance, movement, shipping of varied types of oil products and different liquid chemical products (methanol, caustic soda, urea, MTBE, toluene, benzene).
* Supervised and followed all maintenance works in the area.
April 2002 – August 2002
Snamprogetti SpA, South Pars Gas Field-Iran (Phases 4&5) Project, Milan, Italy
Process engineer
Performed as Process engineering services for "South Pars Gas Field Phases 4 & 5" Project, under Simeco SrL subcontractor at Snamprogetti headquarters including:
* Applied the basic element of shutdown logic diagram of Phases 2&3 and achieved it for several units of Phases 4&5.
* Checked of P&ID's for Phases 4&5 with client's standardization,
* Detailing engineering for: ON/OFF — motor operate valve, pressure —temperature gauge/transmitter and restrictive orifice.
September 2001 - April 2002
Dresser-Rand LTD (Nig.), Obigbo Node, Port Harcourt, Rivers State, Nigeria
DCS supervisor
Dresser-Rand was operation contractor for the client Shell Petroleum Development Company.
* Carried out for pre-commissioning and commissioning operations (vessels inspection, washing, blowing of the units circuits, chemical washing of compressors circuits and equipment's, TEG system degreasing, dry-out, leak test and inertization of the unit lines).
* Worked in a PTW system of Shell Petroleum Development Company, ensuring the observance of plant safety regulations.
* Instrument loops checked and tested of PLC, ESD, DCS logic for compressors, TEG system, and other equipment's (pumps, fans, etc.)
* Carried out for Start-Up, Running Performance test of the units.
* Operated the plant with Fisher-Rosemount DeltaV DCS software, F&G system with Silvertech and Solar M 100 type control for gas turbine,
* Trained on job and supervision of the Nigerian plant operators.
August 1996 –September 2001
OIL Terminal S. A., Constanta, Romania
Shift deputy superintendent at Onshore Tanks Farm "SOUTH"
* The tanks farm has different type of products storage and capacity; it has ability to loading the ships directly from rail tanks.
* Team member for take over or deliver crude oil with the partner companies as company representative;
* Supervised and verified the balance, movement, shipping, blending of crude oil and varied types of oil products;
* Supervised and followed all maintenance works in that area.
December 1995 – July 1996
OIL Terminal S. A., Constanta, Romania
Shift Controller for all Tanks Farms
* Coordinated of movement, blending and shipping of oil products;
* Collaborated with all shift deputy superintendents for maintenance works.
July 1995 – June 1996
OIL Terminal S. A., Constanta, Romania
Junior Engineer
* Knowledge the activity of the firm and make proposes.
Graduated to senior engineer with the project: "Optimization the information-flow within the company OIL TERMINAL S.A."
EDUCATION
October 1990 - June 1995
"Ovidius" University: Faculty of Engineering, Specialty Oil and Gas Processing and Petro-Chemistry
Bachelor of Science in Oil and Gas Processing and Petro-Chemistry, 1995, Constanta, Romania
I was recipient of OIL Terminal's industrial scholarship.
February 2005
APT Antincedio SRL, Pavia, Italy
I successfully completed the course BOSIET with HUET & EBS, H2S and Offshore firefighting and emergency response team member. All these courses are by OPITO certified.
The BOSIET with HUET&EBS course is available up to February 20, 2009.
July 2005
Doris Engineering & Cameron Control Companies, Paris, France
At Doris headquarter I graduated the course to operating sub-sea systems and wellheads for Bahr Essalam Fields by Cameron Control software.
EXTRA–CURRICULUM ACTIVITIES
* I have elementary skill in HYSYS software.
* I have very good skills in MS OFFICE package.
* I have a good skill in English language.
* Driver licenses B, no offences.
View contact information... |