Resume - Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have re...

Misco Jobs

Resume #3417

CONTACT INFORMATION:
View contact information...

Professional Experience

Willbros Engineers Inc.
August 2001 - May 2003 Crew Chief Tulsa, OK
Pipeline preliminary and as built locating boundaries and staking easements for right of way and centerline. Preparing green sheet's and also staking out compressor stations, anomalies, and valve sites.(Using GPS and conventional Data Collection)

Aerial Data Service Inc.
May 2001 - August 2001 Crew Chief Tulsa, OK
Setting control networks establishing horizontal and vertical values using static GPS and digital levelling.

Cimarron Surveying and Mapping Inc.
March 1999 - May 2001 Crew Chief Oklahoma City, OK
(Preliminary Pipeline and Fiber Optic projects) Locating boundaries and staking easements using GPS and Total Station Data Collection.

Harden & Associates Inc.
July 2000 - April 2001 Crew Chief Tulsa, OK
Staking and Collecting data for boundaries,Section and topography surveys.
(Using static GPS and Total Station Data collection)

L. W. Survey
October 1998 - December 1998 Crew Chief Duluth, MN
(Pipeline Asbuilt)Centerline and Right-of-way staking,Profiles,etc.Using Total Station Data Collection.

City Of Tulsa
February 1989 - January 1995 Engineering Aid II Tulsa, OK
(Operating Total Station Data Collection)
on all phases of city owned projects associated with water, sewer, and street improvements. Also served as locater for city utilities and sub-contractors. And other utility companies associated with Okie One-Call System.

Education
Tulsa Community College

* Surveying 1
* Surveying 11
* Land Law (1991)
* Land Law (2000)

(REFERENCES AVAILABLE UPON REQUEST)

Professional Experience
Willbros Engineers Inc.
September 2001 - May 2003 Instrument Operator Tulsa, OK
Pipeline preliminary and asbuilt using Trimble Pro XRS Pathfinder DGPS with TSC1 data collector and Topcon Total Station data collection.(Trimble GPS and conventional software version's used.)

Aerial Data Service Inc.
May 2001 - August 2001 Instrument Operator Tulsa, OK
Establishing horizontal and vertical control networks applying static GPS using Trimble 4000 receivers and Topcon digital leveling for vertical control.

Cimarron Surveying and Mapping Inc.
March 1999 - May 2001 Instrument Operator Oklahoma City, OK
(Preliminary and Asbuilts) for Pipeline and Fiber Optic Routes Using Nikon Total Station and Trimble Pro XRS Pathfinder

Staples Direct
August 2000 - February 2001 Sales Associate Tulsa, OK
Taking office supply orders over the telephone.

L.W. Survey Inc.
October 1998 - December 1998 Instrument Operator Duluth, MN
Pipeline Asbuilt using TDS Data collection with Lietz Total Station.

Education
Woodland High School
June 1987 High School
Business Baileyville, ME

(REFERENCES AVAILABLE UPON REQUEST)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8801 to 8850 of 10902)

Go to Search Parameters...

Brief Description

Total working experience 06 years. DCS operator with 06 years of diversified experience in the field of petroleum refining industry. Have been performing shift duties at Attock Oil Refinery, at Naphtha hydrotreator & Catalytic Reforming unit as Control Room Operator. Well versed with the

Bachelor of Science in Physics.truck license driving

Fresh Chemical engineer had an internship & training, had computer skills with many softwares, Fluent in English as Arabic, & he is looking to prove him self as a success engineer in challenging work.

I'm seeking a job especially through the export-import sector.

Survey Crew (Party Chief) (Instrument Operator) Dear Sir, We have recently been laid off because of lack of work . I appreciate your consideration and look forward to hearing from you. Sincerely, Doug McKay

Engineering Physics graduate looking for an entry level job: Environmental, ocean, weather, energy, gas, oil, R&D.

Instrument Technician

I’m a chemical engineer with 6 years experience worked as process engineer, operation engineer on a NGL plant

After 6 years of work at the world’s biggest oil refinery complex, I have obtained great experience in predictive, preventive and corrective maintenance of rotating equipments, machines start up and failure root cause analysis.

Civil engineer with six years experience in the oil & gas Industry. 1 1/2 years as buyer and 4 1/2 years as control projects Eng (planner, estimator, cost control, contracts administrator)

I am a graduated Electrical Engineer from a reputable university of Pakistan. (UET Taxila). & Throughout my studies, I maintained first class academic record overall. secured (84 %) marks in my final year Engineering. I want to serve your company as an Engineer.

A fresh graduate from the premier university in the Philippines, is geared to apply his extensive academic and research abilities to a company that requires passion, dedication and commitment to excellence from its entry-level applicants.

I am seeking a position in the field of Environmental clean-up. I would be an asset to your company because of the fact that I am a dedicated individual and recently obtained my bachelors degree in Management from the Indiana University School of Public and Environmental Affairs.

6 years experience of Project Management & Execution, Construction Supervision & Quality Surveillance in the Field of Power, Oil & Gas – Pipe Lines with confident communication and Planning Skills.

Applicant a BE chemical graduate to pass out in August 2003. Looking for a job in a chemical industry as a trainee or junior engineer.

This is my resume and my personal details

Ambitious, motivated and enthusiastic to achieve and excel, I am seeking a challenging position in a leading organization providing opportunities of career growth. although I have telecom experience I am ready to take an engineering management job in the oil industry.

Geotechnical Engineer, foundation settlements, reclamation, interpretative and factual report writing

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Civil / Structural Engineer with various international exposure on Power Generating structures, knowledgable with design and detailing software such as StaadPro. and Tekla Structures.

Junior Mechanical Static Equipment Engineer

Millwright, Pipefitter, Construction: I'm expressing my interest in a position with your company. Based on my skills, I am confident that I would be a great addition to your team.

Onshore oil gas pipeline construction, coating, testing, commissioning and start–up; pigging / intelligent (in – line) inspection; pipeline maintenance / maintenance management; good knowledge related to pipeline detail design, route selection, alignment sheets and relevant international standards

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Honour degree holder, project management, project manager, ship repair manager, singapore shipyard

B.sc of Chemical&Petroleum Refining Engineering

Project Management/Operations

Supply Chain and Procurement Professional for oil and gas construction projects

Over three years of experience in the application of earth science engineer expertise in the areas of Geomechanics, computer modeling using finite element modeling tools, site stabilization, expansive soils evaluation and treatment, soil/rock mechanics laboratory testing including procedures, quali

Heavy Duty Mechanic

I am a HSE Professional with more than 6 years experience covering construction, mining, manufacturing and petrochemical.

13+ years of multi-industry experience, master’s degree in engineering, Certified Safety Professional, experienced in system safety and risk assessment, author of technical papers, effective report writing; bilingual, multi-tasking, self-directed, computer literate, analytical

Gas turbine performance, turbomachinery design, CFD, CFX, MS Excel, AutoCAD 2007, MATLAB, Unigraphics, UNIX, LINUX, Gas turbine simulation and diagnostics, Aerodynamics of compressors

Graduate Diploma In Materials Management. Warehouse & Purchase activities are handled by me indepandently.

Over 15 years of rich experience in Project Execution & Management, & Engineering in oil and gas.

WellSite Supervisor

PRO-E DESIGN ENGINEER

Enivironmental project coordinator specializing in oilfield disposal operations for the past seven years

Experienced process control professional skilled in both Onshore and Offshore Oil/Gas operations. Worked in the UK and overseas. A versatile team player with excellent organisational and interpersonal skills. Proven record in Construction, Commissioning and Start up projects.

Warehouse/Supply Management,/Logistics co-ordination and purchasing skills.

OBJECTIVE Seeking career opportunities in challenging environment of the upstream sector of oil and gas industry, where my skills and result oriented analytical approach can be utilized effectively for organizational profitability and personal growth.

Motivated self starter with 8 years in real estate interested in pursuing a career in land operations within the oil and gas industry. I have received the Petroleum Landman School certificate of completion and am interested in learning more about land management as well as gaining experience.

Magna Cum Laude

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

I am a fresh B.Sc Electrical & Electronic Engineer.I am a citizen of Bangladesh.

Electronic/ Mechanical Tech

A demonstrated ability in design, planning and managing heavy equipment and crane, expecially tower crane stationery.

Energetic and versatile Quantity Surveyor (QS) with proven expertise, working with an International Airport Construction Company.

Member of Alberta Society of Engineering Technologists Three years UBD experience as an operator

Work experience Education Additional information Skills Abilities Hobbies

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 [ 177 ] 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out