Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #34605 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

OBJECTIVE:
To use my 33 years of experience with hazardous waste management, site remediation, monitoring, modeling, pollution control, risk assessment, air toxics, permits, environmental regulations, and project management to facilitate cost-effective solutions to environmental problems.

WORK EXPERIENCE:
1994-Present, Cornett Environmental Consulting, Ohio and Virginia CONSULTANT

Provide site investigations, strategic planning, monitoring, modeling, pollution control, risk assessment, regulatory compliance, permit applications, and health and safety programs; evaluate pollution prevention, waste minimization, emergency response, process safety, and site clean-up and closure programs; and coordinate related projects with attorneys and industrial, commercial, and public interest organizations. Coordinate Collinwood Environmental Taskforce.

1992-1994 META, Gaithersburg, MD Senior Environmental Scientist

Principal investigator responsible for baseline and cumulative human health impact assessment for a programmatic environmental impact statement for the U.S. Department of Energy Environmental Restoration and Waste Management Programs. Wrote risk assessment software and evaluated risks posed by DOE installations. Wrote sections of environmental impact statements and associated implementation plans. Evaluated risk assessment, risk communication and waste management methods. Summarized regulations and risk management guidelines. Evaluated waste management and remedial action alternatives. Provided and evaluated emission factors. Drafted technical directives for DOE National Labs and contractors. Evaluated and wrote work plans and proposals. Reviewed technical reports and draft EIS text. Participated in and summarized meetings. Reviewed waste management technology and associated pollution control systems. Identified and recruited experts to help with project. Provided expert testimony in related hearings and litigation.

1987-1992 Resource Applications, Inc., Burke, VA Senior Environmental
Engineer / Manager

Project manager for remedial investigations, feasibility studies and environmental compliance audits at Superfund sites contaminated with herbicides, halogenated solvents, PCBs, oil, fuel, heavy metals, dioxins, asbestos, etc. Wrote baseline risk assessment reports, health and safety plans, and field operations plans. Sampled soil, groundwater, surface water, underground storage tanks, and air toxics. Performed split sampling, arranged for analytical services, and audited remedial action implementation. Created software for modeling and modeled contaminant transport through soil, groundwater, surface water, and the atmosphere, along with associated risks to human health and to the environment. Project manager for and wrote most of U.S. EPA report: Risk Characterization for Site and Situation Assessment, an analysis of Superfund risk assessment methods, uncertainties, policies and decision analytics. Served as Health and Safety Officer. Wrote key sections of U.S. Army Toxic and Hazardous Material Agency Health and Safety Program Manual on hazardous waste operations, risk assessment, radiation safety, drilling safety, monitoring, etc. Wrote and reviewed proposals, work plans, and potentially responsible party (PRP) reports. Designed and wrote specifications for Ft. Detrick hazardous waste and material storage facilities. Wrote O&M manual for new sludge thickeners, evaluated submittals, audited system installation and startup, and tested and approved instrumentation and controls. Zone Program Manager for 21 person Technical Assistance Team providing U.S. EPA with air toxics modeling, risk assessment, CERCLA and RCRA corrective measures studies, chemical safety audits, SPCC investigations, project scheduling, deadline tracking, and emergency response planning, training and program evaluation.

1986-1987 Engineering-Science, Fairfax, VA Senior Engineer

Principal Investigator for the EPA Background Information Document for the Development of Regulations to Control the Burning of Hazardous Waste in Boilers and Industrial Furnaces, Volume III - Risk Assessment. Performed risk assessments and wrote detailed procedures for monitoring and for emergency response during remedial actions at three uncontrolled hazardous waste sites. Provided evidence and expert testimony for litigation. Helped write EPA procedures for dioxin monitoring. Performed quality assurance on hazardous waste trial burn monitoring for EPA.

Claude Lawrence Cornett, Jr. - Page 2
1985-1986 Rust International Corporation, Birmingham, AL Staff Engineer

Wrote "environmental compliance handbooks" for refuse fired furnaces and power plants. Summarized regulations and permit requirements. Provided detailed procedures for monitoring, pollution control, inspections, record keeping, and permit renewal. Evaluated trial burns and calculated enrichment and emission factors. Wrote detailed specifications for instrumentation, automated environmental data processing, scaffolding, sampling ports, and environmental testing services.

1981-1985 Consolidated Edison Co. of New York Environmental Engineer

Performed dispersion modeling and wrote sections of environmental impact statements and testimony on toxic air pollution emissions and impacts. Filled out permit applications and automated associated procedures. Performed and coordinated environmental compliance audits and designed and coordinated environmental monitoring and receptor modeling programs. Drafted corporate environmental policies and procedures. Provided procedures, technical advice and training to power plant personnel for implementing compliance policies. Wrote and reviewed specifications for pollution control equipment, coal cleaning, environmental monitoring, modeling, record keeping and consulting services.

1979-1981 Monsanto Research Corporation, Dayton, OH Research Engineer

Wrote Volume V of EPA NPDES Treatability Manual. Summarized regulations and wrote guidelines for risk assessment and for permit application review in draft EPA Permit Writers' Guidelines for Hazardous Waste Incineration. Summarized trial burns and wrote sections of EPA Engineering Handbook for Hazardous Waste Incineration. Performed pre-test surveys, designed experiments, coordinated process and environmental monitoring, and wrote emission test reports for EPA. Summarized RCRA, TSCA and other regulations and evaluated cost and availability of equipment and services to comply. Designed a trial burn facility, drafted RCRA Part B permit applications, and modeled impacts of toxic substance emissions.

1976-1979 Dalton.Dalton.Newport, Shaker Heights, OH Pollution Analyst

Provided air pollution and noise modeling, summarized regulations, and wrote sections of environmental impact statements. Evaluated risk assessment methods and wrote DOE and EPA guidelines for monitoring and modeling toxic pollutants from advanced energy technologies and associated environmental impacts. Wrote U.S. DOT guidelines for air pollution & noise monitoring and impact assessment. Wrote detailed specifications for pollution control, monitoring systems and services.

1972-1976 Cleveland Division of Air Pollution Control Pollution Control Engineer

Supervised up to twelve technicians performing ambient air pollution monitoring. Worked with NASA on environmental toxics monitoring, risk assessment, and receptor modeling. Evaluated dispersion modeling and emission monitoring. Investigated complaints, gathered evidence, and prepared and delivered testimony.

1971 Bartlett-Snow, Inc., Cleveland, OH Technician

Operated, maintained, and measured emissions from rotary kilns, calcination equipment, fluidized bed reactors, and hazardous waste incinerators. Calibrated, operated, and maintained emission and process monitoring equipment.

EDUCATION
M.S. Air Pollution Control Engineering, University of Cincinnati, 1972
B.S. Physics, Purdue University, 1969
OSHA 1910.120 40-hr Hazardous Waste Site Worker Protection and 8-hr
Supervisory HAZWOPER Training
American Management Association Supervisory Management Training
Microsoft Office Pro, Advanced Visual Basic, SQL, UNIMAP, TRC, HIWAY, IRIS,
RADTRAN, CALINE, MEPAS, Java, JavaScript, HTML, Fortran, MS FrontPage,
Lotus, WordPerfect, Dreamweaver, E-Commerce, CGI, PERL
DOE Environmental Risk Management, Regulation, and Modeling
DOE Risk Communication
Cleveland Engineering Society Industrial Noise Control
EPA Technical Systems Audit
DOE Risk Assessment Model Review
EPA Air Pathway Analysis at Hazardous Waste Sites

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6351 to 6400 of 10848)Go to Search Parameters...
Brief Description
experienced in oil refinery operations,tank farm
Analytical mind and Strong numerical skills
Mechanical Engineer with eight years experience in constuction and maintenance field, Currently Maintenace Engineer in Oil and Gas field. AWS certified Welding Inspector
5 years experience as a Mechanical Design Engineer includes project management, generating modeling using Pro-Engineer and determining stress analysis using finite analysis software Ansys 8.0, geometric modeling in Gambit to solve flow and heat transfer problems in Fluent 6.1 and energy-efficient HV
Qualified physician in oil fiel, long experiense in emergencies in remote areas and medevacs by road and by plane, good experience in safety and health risk assesment.
HSE SUPERVISOR AND MAINTENANCE PERSONNEL
I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.
Qualification: Diploma in Petrochemical Technology Professional Experience: Having11 years experience in Field cum DCS Panel operations in routine operations, start ups, trouble shootings, scheduled & emergency shut down operations of following petrochemical plants. Manufacture of Ammonia: Naphth
Mechanical/piping design experience with knowledge of several CADD tools and computed based softwares use in this field.
I am an experienced research chemist specializing in analytical chemistry using chromatographic instrumentation for the analysis of petorleum, environmental and food samples
Energy conservation, energy audit
Skilled Engineering Project Manager for multidisciplinary EPCM services for the oil and gas industry, accountable for maintaining good client relations and satisfaction. Positions accountable for safety in design, time and cost/benefit management.
To obtain a Full Time Chemical Engineering, Chemist or Quality Control position starting from February 1, 2003.
An innovative and intelligent Electronic Engineering Graduate who is hardworking, self-motivated and responsible. An articulate and outgoing personality that remains confident and good-humored under pressure especially when meeting tight deadlines set by the oil industry.
My belief, in order to create a safe orientated working environment, the understanding of safe, danger and personnel safety must be mindset into every staff in the organization.
I AM INTERESTED FOR WORK IN OIL AND GAS INDUSTRY-TEAM WORKER-
My carrer have been linked completely to the Oil Industry and particularly to the Refinery area. During my experience in the Oil Industry I have had the opportunity to go through the different Engineering areas, always linked to the project execution.
Skilled rig hand. 15years experience. Worked drilling and production rigs.
I graduated Faculty of Wells Drilling & Exploiting of Oil and Gas Reservoirs, within Oil and Gas Institute from Ploiesti
I am interested in work overseas. 15 years mechanical engineering experience in India, Malaysia, and Middle East
Began career as a Field Services Technician working in the Middle East during mid 80’s, and have progressively been promoted to various operations management positions, including Sales Manager, Assistant Operations Manager, Field Safety Manager, Sales Consultant, and Regional Manager.
NINE (9) YEARS EXPERIENCES IN OIL AND GAS ENGINEERING DESIGN AND PROJECT MANAGEMENT CONSULTANCY SERVICES WITH 18 MONTHS IN THE UK
Technical Sales Professional with proven track record in new product introductions and new customer development along with technical support in Lubricants/Chemical business. A strong team player with active learning orientation, high energy, enthusiasm and result orientation.
To seek and strive for a distinguished position in Project Management (Construction) and Project Planning (Plants & pipeline/process piping) and to contribute the overall success of a progressive company by employing the best of my potentials, skills and attitudes earned in profession.
I am a recent graduate in Mechanical Engineering from the University of Washington.
Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.
Fifteen years of oil field related experience, Ten years offshore, has developed the following core competencies; Communication with varied and dynamic teams throughout the industry. Proven planning and prioritizing ability on both steady state and commissioning projects.
Surveyor
Network/System Engineer/Administrator with 4.5 yrs of experience primarily in the integration and implementation of internetworks and managing the system support team.Designed routed WAN and switched/shared LAN based on Cisco Products.
I am currently employed as an A grade electrician working for a large Data and Electrical company. I am actively seeking a busy hands position in the mining industry.
I have about 15 years of experience in operation of various Chemical plants, oil refineries and oil and gas gathering stations in India and Gulf Onshore and Offshore.
I am graduated Middle East Tecnical University as a Petroleum Engineer in 1995 and started to work in the industry in the same year. My professional bacground has covered reservoir engineering, production engineering, workover & completion engineering in Azerbaijan, Kazakhstan, Houston and Turkey.
Well organised and reliable Geoengineering professional with excellent presentation and interpersonal skills. Experience of various hardware and software.
SKILLS: M.S chemical engineering with strong background in process design, process integration, simulation skills and successful industrial experience.
Petroleum and natural gas engineering, BSc Earthsciences, MS Candidate
A challenging position effectively utilizing my skills in research, indexing, information technology, and electronic publishing in the petroleum industry.
Hard worker.
Materials Management Specialist - Offshore
Finishing my MS degree in geology and am looking for a career. I am willing to travel and/or relocate. I can legally work in the US, Canada, and Europe (UK citizen).
Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D
Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating
BSc Degree in Environmental Engineering, excellent leadership and communicative skills, excellent monitoring, auditing, evaluation and reporting skills, ability to operate as a member of a multi-disciplinary and multi-cultural team, NEBOSH and ISO 14001 Lead Auditor Qualifications.
I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.
To become an asset for your organization and to contribute to the quality and growth objectives of my workplace, in the process the endeavor will be to combine. My creative and professional skill.
Senior drilling and completions engineer with 3 years of experience with major oil company, land rig operations for vertical, deviated and horizontal wells with single and single selective completion type.
Sales and Operations manager highly business oriented and objective driven
Piping Engineer, Mechanical
Now, Gen. Mgr. - Projects EPC Contractor at Kazakhstan
Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation
Proven analytical skills, ability to work under pressure, quick learner adaptable, self- initiative, good listener, experience in office-based practice, communication skills, programming Skills, hard working and posses knowledge.
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   [ 128 ]   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com