Resume - DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Ref...

Misco Jobs

Resume #35003

CONTACT INFORMATION:
View contact information...

LANGUAGE PROFICIENCY: English, Hindi, Gujarati

QUALIFICATION: B.Sc (chemistry)-1st class

EXPERIENCE: 13 years
Nature of job: Panel Operation
Hydrogen plant (181 mtpd)
* 2 nos., Refinery Fuel Gas system, Hydrogen make up gas compressor,
HP/LP Flare of Refinery Complex and LNUU.
Name of the Employer: Reliance Petroleum Limited

ABROAD TRAININGS:
Attended Plant Operational Training for Phosphoric acid plant At PRAYON RUPEL TECHNOLOGIES. S.A. Belgium for one month.

COMPUTER ORIENTATION: Windows 97, ASPEN IP-21, LIMS, SAP

EXPERIENCE SUMMARY:
13 Years of Total experience as a Process Operator-Panel Officer in Refinery, fertillizer
Functional Experience includes commissioning of Two fertillizer complex plants

TECHNICAL EXPERIENCE:
Organization: Reliance Petroleum Limited., Jamnagar, Gujarat.
1. From Sept 28, 2000 to Till date:
Reliance Petroleum Ltd., Jamanagr Complex is the first fully integrated manufacturing complex in the world to house a petroleum refinery complex, petrochemical complex, a power generation complex, a port & terminal complex and pipeline network. The refinery having processing capacity of 450,000 BPSD of Crude is the World's largest grass root refinery.
To meet the reduced sulfur specifications the Hydro desulphurisation & Hydro-treating requirements have significantly increased the Hydrogen consumption in Refineries.
Working as PANEL OFFICER in Hydrogen manufacturing unit, hydrogen make-up gas compressor, refinery fuel gas system,HP/LP flare of Refinery complex, Light nephtha hydrotreater with FOXBORO DCS System.
Hydrogen Plant: - Capacity 181 TPD * 2 = 362 TPD
Technology: - Linde AG Germany
This HMU is based on a top-fired steam reformer with high Temperature Shift Converter and a PSA unit for Hydrogen purification. The unit is designed to operate with refinery fuel gas and LPG or a combination there of as feedstock.
As a Panel Officer responsible for following activities:
* Plant operated by DCS of Foxboro I/A Series 50.
* To maintain Process parameters, Keep checks on quality and maintain them during
Shifts. Will assist Shift Supreitendent to achieve shift targeted production.
Operation of plant at optimum condition and record critical parameters.
* Handling of Safety and Fire fighting equipment.
* Fire and Gas detection system operation supplied by WARNALD
* Emergency handling
* Prepare NCR report and other Recordfor the ISO requirements.

HYDROGEN COMPRESSION UNIT:
Unit consist of Three Reciprocating Compressor. Each compressor is a 2 stage, double acting, 4 cylinder machine, manufactured by Thomssen International B.V., Netherland, driven by 5.35MW with a flow of 119,000 NM3 /HR.
Compression Control, Machine monitoring and H2 distribution control by DCS.

REFINERY FUEL GAS UNIT:
Purpose of Fuel unit is to collect of gases generated from various plants and supply fuel gas and pilot gas at a working pressure with LPG backup system.
Pressure control system and LPG backup system operated from DCS system. Light
HP/LP Flare Of The Refinery:
HP/LP flare control throuhgh DCS with flare gas recovery compressor.

LIGHT-NAPHTHA HYDROTREATER:
Capacity: 29500 BPSD OR 130 T/hr
Technology: Universal oil products.
Light naphtha hydrotreter is a FCCU down plant to saturate the olefines to less then 0.1%and sulpher less then 1 ppm. This hydrotreated naphtha will be used in petrochemical naphtha /gasoline blending /feed to Hydrogen manufacturing unit.

Also familiar with MEROX and SWS unit operation.
As our company is ISO-9001 certified and PMS oriented units, I had complete knowladge of ISO &PSM system.

2. From march 1997 to September 2000:
Organization: Indogulf fertillizer and chemical corporation ltd.
ISO 9002 certified continues process plant Technology supplied by Prayon Rupel Technologies (process: prayon diydrate mark - 4)
Worked as panel technician in phosphoric and sulphuric acid plants
* precommissioning and commissioning both acid plant as DCS panel operator having capacity to produce 335t/day(100%P2O5) and 1200t/day sulphuric acid
* familiar with all operation of belt filter and ball mill
* Working experience of vacuum evaporation

3. From nov-95 to feb 97
Organization: Heubach colour pvt ltd (German Managed, 100%EOU Co.)
* Worked as Area Incharge for two section filteration and scrubbing
* Working Experience Of India’s Largest Plate Filter
* Worked as Area incharge in pigments plant
* Independent handling of two sections

4 From apr-94 to 6th oct-95
Organization: Gujarat state fertilizers and chemical company ltd.
* taken 11/2year full training for the operational training of ammonium sulphate and Ammonia plant including start up, shutdown and normal operation and basic process training
* safety and pollution aspect.
* working experience of vacuum drum filter and reciprocating vacuum pumps
* working experience of vacuum evaporation cum crystallizer and Ammonia handling
5. from june-92 to march -94
organization: Caadchem industries PVT LTD. worked as Jr. Chemist in DASA plant

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4101 to 4150 of 10816)

Go to Search Parameters...

Brief Description

To operate shutting down / starting-up the processing plant assigned to an Offshore / Onshore platform for collection, treatment & inward transmission to consumers of oil & gas. To mix chemicals, prepare the plant for routine / planned maintenance and carry out first line maintenance.

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

Excellent experience in the oilfield, having worked as Rig Manager for 3 1/2 years , working on Top Drive Telescopic Doubles, scissor sub and Super-single rigs.Good communicator, speak fullest Spanish excellent people skills and works well with others

I am graduated faculty of engineering, stillworking in my Master Thesis, Last position AD on MAERSK ENDURER HPHT Jack-up

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

I am a Static Equipment Design Engineer with %+ years experience. I have work experience in Both static and Rotating equipments. Ihave strong exposure to design softwares such as Compress, B-JAC, etc.,

A Mechanical Engineer with 4.7 years of experience in a piping &Pressure Vessel Currently working as QA\QC ENGINEER in M/s KALPATARU POWER TRANSMISSION LTD, GUJARAT

Post graduate in chemical engineering with impressive skills and work experiences seeking a full time position as a chemical/process engineer.

sound knowledge of engineering hydrodynamics, fluid dynamics, working experience with subsea pipelines (marine riser), having received master degree in offshore engineering, seeking an opportunity in the filed of subsea engineering.

Masters in Electrical Engineering with 2 yrs of experience in Electrical Controls & Instrumentation

Oil & Gas Land services

Procuction,project,commissioning experience in chlor alkali industry

journeyman electrician

Landman

Chemical Engineer, Piping, SmartPlant 3D (SP3D), 5+ years of exp.

Fluent in English and Filipino. Knowledgeable in computer and customer service related works. Possessed with proper knowledge, good quality of administrative and banking skills and right attitude. Interests include surfing the net and socializing with people. Goal-oriented, adaptable, determined and

Procurement Engineer with 4.5 years of experience in Procurement of Static Equipments, Packages and Piping Specality itemd for EPC Project. Act as focal point for all Third Party Inspection for all Packages, Piping bulks etc required for EPC Contracts. Also acting as Logistics Controller

DCS Control Room Operation In Hydrogen. LPG MEROX At World Largest Petroleum Refinery In Reliance Industries LTD

Fluent in French, Arabic and meduim in english

I have 8 years experience in process piping design in hydrocarbon service, including layout and production piping.

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

Presently working offshore China coast for the last 11 years. We have drilled & completed over 48 wells. Side tracked over half. We have drilled 8 ERD wells the furtherest is 9238m (with a horizontal displacement of 8063m June 1997) This is China record for "Deepest Measured Depth".

Contracts, Services Manager, Wellhead Maintenace, Integrity Engineer, Senior Well Engineer

I have been a cementing supervisor for Haliburton and Schlumgerger for over 20 years, I have worked mostly offshore, hpht, deep water, I have some land expierence, I am currently working in Yemen, I have a very good knowledge of all facets of cementing, tools, chemicals and equipment etc

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 [ 83 ] 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out