Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #3534 next resume »» CONTACT INFORMATION: View contact information... PROFESSIONAL EXPERIENCE CENTRAL WAYNE ENERGY RECOVERY Div. Constellation Energy Group, Dearborn Heights, Mi. 2001-Present Operations & Maintenance Manager (5/02 – Present) General Duties: * Managed all aspects of maintenance and operations involving a waste to energy power plant * Insured environmental standards relating to CO, SO2, Nox, HCL, Opacity, wastewater, metals, and ash were met * Directed operations and maintenance relating to all equipment including: Turbine generator, boilers, air compressors, hydraulics, pollution control, water chemistry, etc… * Determined and oversaw on the job training * Insured adherence to all safety guidelines and generated safety memoranda's * Scheduled outage work and inspections, managed in-house and contract labor * Wrote system descriptions, operating procedures, advancement qualifications * Developed new operating standards along with log keeping * Performed walk-downs for Safety-Environmental & Production practices * Tracked purchasing in my areas of responsibility setting up data base for future budgets… o Purchased spare and emergency parts o Assisted in setting up purchasing budget for facility… * Developed training program for ASME QRO site-specific qualification & ASME QRO Provisional Certification. Shift Foreman Control Room Operator General Duties: * Monitor Shift Operations * Monitor/Direct Contractors * Troubleshooting * Operated Bailey Infi90 DCS. BRIDGESTONE/FIRESTONE TIRE AND RUBBER 1995-2001 Maintenance and Repair Mechanic Responsible for the installation, maintenance and repair of industrial machinery and associated equipment in a major tire and rubber manufacturing plant. * Includes the assembly and installation of new equipment, upgrades to existing machinery, and the maintenance and repair of existing production, auxiliary, mechanical and miscellaneous equipment. These tasks involved all forms of mechanical, hydraulic, and pneumatic principles and applications, including electrical motor alignment, metal forming, welding, and pipefitting. * Conducted routine inspections of production, mechanical and miscellaneous equipment for defects. Removed, repaired, and/or replaced defective parts. Modified, installed and aligned production machinery to preclude untimely failures. * Performed rapid diagnosis and solution of plant equipment problems to minimize production downtime. Performed rapid temporary and/or permanent repairs employing available replacement parts, or by fabricating the required parts. * Operated and maintained Boilers, turbines, pumps, air compressors, water treatment, and all auxiliary equipment * Rebuilt pumps, turbines, air compressors, replaced valves, heat exchangers, and troubleshot electrical equipment. * Awards include: #1 Maintenance Department, Bridgestone/Firestone North America, for "Minimal Machine Downtime and Frequency for Breakdown"; and multiple corporate Safety Awards. ABC CONSTRUCTION 1993-1995 Owner/Manager/Carpenter: Assisted in operating a small general construction company…Supervised up to 5 personnel…estimated jobs, wrote bids…change orders, etc…drew plans…assisted in construction of various structures…Job Forman…set up computer system. WHEELABRATOR ENVIRONMENTAL SYSTEMS 1987-1993 Shift Supervisor (1989 –1993) * Supervised aspects of daily operations involving a waste to energy power plant… * Insured environmental standards relating to CO, SO2, NOx, HCL, OPACITY, wastewater, metals, and ash were met… * Directed operations relating to all equipment involved including: turbine generators, boilers, air compressors, hydraulics, pollution control, water chemistry, etc… * Determined and oversaw on-the-job training… * Insured adherence to all safety guidelines and generated safety memoranda's… * Coordinated shut-downs, sketched drawings and interpreted blueprints… * Interacted with general public to promote public relations… * Worked with local Governmental officials… * Scheduled outage work and supervised both in plant and contract maintenance workers… * Directed valve maintenance program… * Performed quality assurance inspections… * Assisted with initial start-up operations… * Selected vendors and arranged purchasing for resins, chemicals, and miscellaneous equipment needed for start-up operations… * Supervised final plant assembly…Made determination on final acceptance… * Recommended corrective actions on defective equipment and procedures… * Wrote initial system descriptions to parallel new equipment and start-up procedures… * Supervised shift and support personnel… * Evaluated personnel performance… * Developed numerous company policies and procedures… * Established Hazardous-Communication program. O&M Technician * Performed PM's and corrective maintenance on power plant equipment, including boilers, turbines, pumps, hydraulic systems, steam systems, pneumatic systems, valves, etc… * Maintained records of breakdowns, preventive maintenance and operating hours on all equipment… * Rapid troubleshooting with emergency repairs to maintain minimal downtime... * Worked with vendors to improve reliability and performance. * Monitored Plant conditions * Control Room Operator Bailey Net90 DCS * Started as an Auxiliary Tech. & was promoted through the ranks. CONSOLIDATED ICE CREAM CORP. NORFOLK, VA 1984-1986 Fleet Mechanic/ Warehouse manager * Started as mechanic promoted to warehouse manager, maintained small and medium duty refrigerated ice cream trucks, doing major and minor repairs as deemed necessary… * Responsible for overall warehouse activities… o Ordering perishable inventory, rotating stock, and Q.A. checks… o Supervised 6-12 personnel…Hired seasonal help… o Reorganized warehouse to increase amount of inventory… U.S. Navy 1979-1984 Preventive Maintenance Supervisor * Managed and coordinated the Preventive Maintenance Program for the maintenance of fossil fuel power plants and their associated mechanical, hydraulic, and pneumatic systems. Supervised and trained maintenance personnel; monitored and inspected all maintenance evolutions/iterations for specification, procedure, and safety compliance. Reviewed all maintenance work packages and conducted quality control audits of the work center. Machinery Division Supervisor * Managed/performed corrective maintenance of boilers, steam turbine engines, generators, heat exchangers, distilling plants, pumps, air compressors and valves. Extensive experience in management of Planed Maintenance System (PMS) programs of inspection and servicing of plant equipment. Assignments included the USS Yellowstone, Norfolk, VA, USS Palaulu, Long Beach, Ca. EDUCATION Professional * ASME International QRO Qualified * -Incinerator Operations, Department of Ecology & State of Washington License. * -First Aid, CPR, & firefighting techniques * -GE turbine/generator maintenance and operations * -Power plant water chemistry * -Combustion controls * -Air pollution control systems * -Centrifugal pump overhaul * -Ammonia & chlorine safety * -Boiler tech. "A" school * -Various seminars and power plant training systems. View contact information... «« previous resume next resume »» Search Results (Resumes 4401 to 4450 of 10917) Go to Search Parameters... Brief Description Procurement Engineer Broadening experience leading to Project Manager and Executive/Board Level opportunities. Shift supervisor at worlds largest butane to maleic anhydride facility. Qualified in all assignments including control room and field. Electrical and Instrument Technician, 20 years international experience. Perhaps you are looking for an experienced Security, Surveillance and Investigations Management professional, who is highly skilled in all aspects of highly sensitive investigations, corporate security, surveillance and asset protection? I can offer extensive supervisory experience in the oil and gas industry, Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi Well Test Supervisor for Canadian Superior, based in Port of Spain and offshore Trinidad. Responsible for onshore planning and Wellsite supervision of High Rate Gas Well Tests. I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS. Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance. Field Manager/ Operations Supt. with experience managing international oil/gas projects. BE Chemical Engg. Experience in Multinational Storage terminal Ship loading/ unloading of Acids, petrochemicals and LPG. I am a well-motivated person, honest, serious, confident in all aspects. I got my high school diploma with A grade and have been accepted in the medical college. Infortunately not completed due to political reasons at that time in my country.I speak fluently Arabic, English , French, a little German I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University. Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks. Multi disciplinary engineer A Mechanical Engineering Graduate with a total of 13years experience in oil & gas, petrochemical and food processing plant. Information systems - Analyst /Programmer/Project leader/Business Analyst Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems CRO/LEAD OPERATOR. OFFSHORE Oil/Gas production platform. Three phase seperation, wellbay, hydrocyclones, compression, dewpoint control, asociated utillities. Gas plant H2S removal, adsobsion, solvent regen, sulphur recovery, tail gas unit. Cryogenic N2 removal, mol sieves, cold box etc. Refinery exp 3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere. Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants. 14 years of professional experience as Chief Accountant and Accountant in reputed companies. Excellent in Accounting, Auditing, and Preparing Account related documents for all needs of a company. Hands on experience in Microsoft Office and Accounting packages like Daceasy, E.X. , Tally etc. I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels. Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa. Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction. Inspection high pressure vessels and supervision pipe-lines in Europe. Quality Assurance & Quality Control in nuclear power plant - crew 7 people. Quality Control, punching, hydro-testing of pipe systems - crew 10 persons. 30 years experience with Land Based Drilling Rigs that include SCR, Mechanical, Mobil and Heli Rigs ranging from 800 to 3000 HP, Familiar with Topdrives both Hydraulic and Electric Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K. Experienced Contracts Engineer, Planner, Estimator having worked successfully in all aspects of the industry from North Sea to Australia. Enjoys the challenges of new technologies and new ideas Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities. My expertise includes waste-to-energy facilities along with gas and oil fired boilers and all their associated equipment. I have experience in turbines up to 70 MW’s. I would make a good fit into any type of power plant weather it be in operations, maintenance, supervision or management. I am a driven and focused individual who knows how to set goals and work to achieve them. Outstanding skills/competencies in Materials Management, Inventory Control and Accounting. Pro-active and results-oriented with the talent for identifying and solving problems. Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities. Over twenty-four years of professional experience as a planner, scheduler, estimator, project engineer and supervisor in the industrial construction, maintenance and turnaround fields of the petrochemical, paper and pulp, power generating textile manufacturing and offshore industrial industries. For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas Last employer: Lidl Ireland Ltd. as District Manager. International experience 25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections Geodesist/Land Surveyor/Geomatics/GIS consultant Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal -20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields. I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries. Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials. 33 years experience in drilling industries, started as rig hand, since 15 years drilling supervisor, drilled several types of wells in different countries on and -offshore. International Finance Manager with extensive experience in the upstream oil and gas business. Proven ability in Purchasing, Expediting, Procurement QA/QC Coordinator, Material Control, Material Coordinator, Logistics and Warehousing. Developed and implemented Material Control and Warehouse Procedures. Proficient in SAP, MS Word and Excel. Bilingual, fluent in English and conversational Thai. 29 years oilfield experience from roustabout to site manager. i have over 20 years experience in the oil and gas industry of which have been in the materials/logistics role Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair. 20 years + WSS, proficient in Completions (Land, Platform, Sub Sea, Tender, Jack Up) also single, duals, electronic, Wireline, Coil Tubing, HWO. Service Industry background (Otis and Baker Oil Tools). Current contract finishing Sept. As per CV, willing to work in all countries. First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   [ 89 ]   90   91   92   93   94   95   96   97   98   99   100   Next   Last Seach Parameters Change search parameters... INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com