Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #3638 next resume »» CONTACT INFORMATION: View contact information... Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Software –PDS, Autocad/Rebis, Microstation/Pipegen, Office and Pro-E. 2001-present. Construction Lead/designer. Arch Chemical Corp. Rochester Mechanical design and construction coordination for chemical production facility. Asme 31.3. AutoCAD 2000 - 2001 Construction Coordination/commissioning, Fluor/Intel Fab 17. Construction coordination, commissioning and design of chemical, high purity water/gas and utility piping and equipment. Including services to planar, etch, diffusion tools and for copper waste recovery facility. 1999-2000 Senior Designer, RDS\ Invensys. 3D Equipment and piping layout for food process. Rebis/ Pipegen. 1998 to 1999 Senior Designer, JNE/Proctor & Gamble. 3D design development for Global facility prototype with high purity vessels, pumps, heat exchangers, filters, mixers, blenders and piping. PDS 1997-1998 Construction facilitator, Praxair, Mentholatum, Buffalo NY. Cryogenic process piping. FDA Plant layout and installation. Urethane mold modification. Microstation, Pro-Eng. 1997 Design Engineer, Caterpillar Inc., Peoria, Illinois. Design of enclosures. Machining/Welding jigs & tools. Pro-Eng. 1992-1996 Construction Lead/ design, Bayer Corporation, Elkhart, Indiana. Pharmaceutical equipment layout, piping design. Installation supervision of vessels, pumps, centrifuges, blenders, hoppers, exchangers, dryers. 1990-1992 Lead Designer, Raytheon, Boston, Mass. Staff supervision and design of equipment layout, piping design for Refinery, Excel, Microstation and PDS. 1989-1990 Field representative for construction /Dupont and Esso. Ont., Canada. Fieldwork trade coordination and supervision of mechanical installation. 1988-1989 Steelwork Designer, Canadian Frigate Program. Design. Steel foundations and structures. 1987-1988 Supervisor, Alpha Engineering, Cork, Ireland. Construction supervision at Ford, Pfizer, Dunlop and other sites. Equipment installation, tie-ins, scheduling. Coordination of trade disciplines. 1986-1987 Production Manager, Sea-Ray Boats BV., Cork Ireland. Production streamlining and quality improvement for the lamination department. Staff training to optimize production. 1983-1986 Supervisor, Sifco Turbine Components, Cork, Ireland. Training /supervision of staff in hand blending, machining & presswork. 1976-1983 Supervisor, Alpha Engineering, Cork, Ireland. Mechanical site supervision piping, fabrication and machine shop work. 1975 St. John Shipbuilding, New Brunswick, Canada. Naval Architecture Technician, piping and steelwork design. 1974 Verolme Cork Dockyard, Cork, Ireland. Naval Architecture Technician, ship oil/rig construction.. View contact information... «« previous resume next resume »» Search Results (Resumes 4401 to 4450 of 10917) Go to Search Parameters... Brief Description Oil Executive Procurement Engineer Broadening experience leading to Project Manager and Executive/Board Level opportunities. Shift supervisor at worlds largest butane to maleic anhydride facility. Qualified in all assignments including control room and field. Electrical and Instrument Technician, 20 years international experience. Perhaps you are looking for an experienced Security, Surveillance and Investigations Management professional, who is highly skilled in all aspects of highly sensitive investigations, corporate security, surveillance and asset protection? I can offer extensive supervisory experience in the oil and gas industry, Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi Well Test Supervisor for Canadian Superior, based in Port of Spain and offshore Trinidad. Responsible for onshore planning and Wellsite supervision of High Rate Gas Well Tests. I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS. Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance. Field Manager/ Operations Supt. with experience managing international oil/gas projects. BE Chemical Engg. Experience in Multinational Storage terminal Ship loading/ unloading of Acids, petrochemicals and LPG. I am a well-motivated person, honest, serious, confident in all aspects. I got my high school diploma with A grade and have been accepted in the medical college. Infortunately not completed due to political reasons at that time in my country.I speak fluently Arabic, English , French, a little German I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University. Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks. Multi disciplinary engineer A Mechanical Engineering Graduate with a total of 13years experience in oil & gas, petrochemical and food processing plant. Information systems - Analyst /Programmer/Project leader/Business Analyst Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems CRO/LEAD OPERATOR. OFFSHORE Oil/Gas production platform. Three phase seperation, wellbay, hydrocyclones, compression, dewpoint control, asociated utillities. Gas plant H2S removal, adsobsion, solvent regen, sulphur recovery, tail gas unit. Cryogenic N2 removal, mol sieves, cold box etc. Refinery exp 3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere. Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants. 14 years of professional experience as Chief Accountant and Accountant in reputed companies. Excellent in Accounting, Auditing, and Preparing Account related documents for all needs of a company. Hands on experience in Microsoft Office and Accounting packages like Daceasy, E.X. , Tally etc. I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels. Start-up engineer on power plant control systems, Foxboro I/A, Bailey, GE Mark VI, and Yokogawa. Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction. Inspection high pressure vessels and supervision pipe-lines in Europe. Quality Assurance & Quality Control in nuclear power plant - crew 7 people. Quality Control, punching, hydro-testing of pipe systems - crew 10 persons. 30 years experience with Land Based Drilling Rigs that include SCR, Mechanical, Mobil and Heli Rigs ranging from 800 to 3000 HP, Familiar with Topdrives both Hydraulic and Electric Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K. Experienced Contracts Engineer, Planner, Estimator having worked successfully in all aspects of the industry from North Sea to Australia. Enjoys the challenges of new technologies and new ideas Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities. My expertise includes waste-to-energy facilities along with gas and oil fired boilers and all their associated equipment. I have experience in turbines up to 70 MW’s. I would make a good fit into any type of power plant weather it be in operations, maintenance, supervision or management. I am a driven and focused individual who knows how to set goals and work to achieve them. Outstanding skills/competencies in Materials Management, Inventory Control and Accounting. Pro-active and results-oriented with the talent for identifying and solving problems. Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities. Over twenty-four years of professional experience as a planner, scheduler, estimator, project engineer and supervisor in the industrial construction, maintenance and turnaround fields of the petrochemical, paper and pulp, power generating textile manufacturing and offshore industrial industries. For the last twenty five years I have mainly been working of shore. I have worked in various over sea countries mainly in Asia. In that time I have done horizontal long reach, sub sea completion’s, HPHT wells and worked in H2S areas Last employer: Lidl Ireland Ltd. as District Manager. International experience 25 years petrochemical I&E experience, engineering, and operations assistance...Process Safety Management/Procedures writing...training manuals...PowerPoint, Word, Excel...Startups, Commissioning, Shutdowns, Safety Enforcement, Inspections Geodesist/Land Surveyor/Geomatics/GIS consultant Obtain a full time position in the oil field services industry. To be part of a world class Oil Services Company would be a welcome move for myself. I insist on providing a quality product and feel most fulfilled when I achieve this goal -20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields. I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries. Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials. 33 years experience in drilling industries, started as rig hand, since 15 years drilling supervisor, drilled several types of wells in different countries on and -offshore. International Finance Manager with extensive experience in the upstream oil and gas business. Proven ability in Purchasing, Expediting, Procurement QA/QC Coordinator, Material Control, Material Coordinator, Logistics and Warehousing. Developed and implemented Material Control and Warehouse Procedures. Proficient in SAP, MS Word and Excel. Bilingual, fluent in English and conversational Thai. 29 years oilfield experience from roustabout to site manager. i have over 20 years experience in the oil and gas industry of which have been in the materials/logistics role Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair. First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   88   [ 89 ]   90   91   92   93   94   95   96   97   98   99   100   Next   Last Seach Parameters Change search parameters... INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com