Resume - 10+years Instrumentation/Electrical/Control system experience, Canadian Journeym...

Misco Jobs

Resume #3648

CONTACT INFORMATION:
View contact information...

Qualifications: Canadian Inter provincial Journeyman Instrument Mechanic Certificate, Electrician ticket
Certified Engineering Technologist--- Alberta Society of Engineering Technologist

Summary
Extensive Offshore Experience:
Completed overall project assignment, including design, engineering, installation, commission and maintenance write documentation for operations o of Offshore Oil and Gas project

Maintenance:
maintenance on instrumentation system in various industries including Oil and Gas, Refineries, Petro-chemical, Oil Sands, Waste Water treatment plant, Utilities, Nickel Refinery and mine
Troubleshooting and maintenance and repair of pneumatic, Hydraulic and electronics process measurement and control instrumentation
Wrote operation and maintenance procedures for instrumentation including analyzers, gas detection system, smart transmitters.
Computerized Maintenance Management System software includes Maximo, JD Edwards

Pre commissioning/Commissioning loop checking, fault finding and calibration of analog and smart pressure, temperature flow and level instruments manufactured by leading suppliers such as Fisher-Rosemount, Foxboro, Honeywell, Panametric, Enraf and Endress Hauser, including Foundation Fieldbus Instrumentation. Test equipment includes HART Communicator, DE Communicator, PC, and other smart calibrators.
Worked with contractors and vendors during pre-commissioning activities
Assisted project engineers in making design changed to enhance operability and correct design or construction oversights and ensured that such changes were implemented and tested.

Design
Designed instrument systems, ordered instrumentation and prepared and issued design package for installation and construction
Experience in developing, reviewing and updating P&IDs, Instrument loop diagrams, wiring diagrams, instrument installation drawings and instrument datasheets
Can use Intools well

Planning and Supervisory
Planned instrument/electrical maintenance team work and shutdown work
Supervised contractors and commissioning team in commissioning stage, ranging in size from 3 people to 50 people.

Control System projects
Prepare Project Definition Documentation, Review Control system strategy, Design the control system, implementation of Control system including HMI development and PLC/DCS/SCADA configuration and testing, project management,

Shutdowns
Shutdowns in Ft. Mcmurry, Carseland, Joffre.

WORK HISTORY

Aug.2003 to Oct 2003
Sr. Control System Technician
Kenonic Controls, Emerson Process Management

* Technical Support in Instrumentation and Control Systems for Syncrude Aurora, Agrium Carseland, Nova Chemical shutdown projects

Ft.Saskachewan 2002.10. To 2003.4
Instrumentation Technologist
Shell Scotford Upgrader
Commissioning, startup and Maintenance
Member of HMU/SRU Support Team
* Commissioning all instrumentation and control system in HMU/SRU
Member of Panametrics Team
* Pre-commission and Commission all Panametric Ultrasonic Flow transmitter over Shell Upgrader site, including steam/gas/flare/liquid etc
* Trained other technicians for maintenance and troubleshooting
Member of Analyzer Team
* Commissioning, calibration and maintenance of various analyzers
* Set up instrument maintenance files for analyzers.
* Order inventory and spare parts
Member of Utility and Offsite Team
* Waterblock/Tankfarm/Utility/Offloading skids commissioning startup and technical support( review P&ID, Instrument Datasheet, review control system strategy etc)
Field Instrumentation and Control Systems that I worked on include: Foxboro I/A DCS, GE Fanuc 90-70 PLC, Industrial Networking, Continuous Emission measurement System, AMETEK Sulfur dioxide and Hydrogen sulfide Analyzers, Rosemount PH /ORP Conductivity/DO analyzers, Radar and Ultrasonic tank gauging system by Enraf and Endress+Hausser, Servomax Oxygen Analyzers, Foundation Fieldbus pressure, level, weight, flow transmitters, switches, valves, fire and gas systems

2002.6 To 2002.8
Instrument Specialist Calgary AB
ACM Automation INC.

* Reviewed P&ID, Designed SIS system
* Projects include Nexen SAGD Pilot Plant project, Suncor Mill ileum Project, AEC Medicine Hat Gas Storage plant etc

2001.3 to 2001.9
Instrument Man
INCO Refinery Thompson MB
* Designed, installed, tested all newly installed instrumentation, programming and commissioned relative control system
* Troubleshoot and programming PLC/DCS program
* Commissioned, startup and troubleshooting Instrumentation and Control Systems in different skids
* Field Instrumentation and Control Systems that I worked on include: Foxboro IA DCS, AB PLC-5 and SLC 500 PLC, Industrial Networking, pressure, level, weight, flow transmitters, switches, valves, fire and gas systems, Analyzers etc

2000.11-2001.3
Control System Specialist
Xgen Engineering Inc. Calgary, Canada
* P&ID Verification, Instrument Datasheet Classification
* Control System configuration and HMI development
* RTU testing
* Field Instrumentation and Control Systems that I worked on include: Wonderware Intouch HMI, Siemens Moore APACS+ DCS, Quadlog SIS System, Culter-Hammer RTU, Industrial Networking such as Ethernet, Thick NET etc.

1999.3-2000.9
Instrument/Electronics Technician
BP AMOCO Orient Petroleum Company China
* Troubleshoot and tested industrial measuring and control instrumentation as well as Fire and Safety system.
* Reviewed P&ID, corrected Instrument Datasheet and loop drawings.
* Evaluated the necessarily of new instrumentation or fire and gas head
* Designed, installed, tested all newly installed instrumentation
* Control System Programming and testing for newly installed instrumentation
* Quality control of contractors work on specific instrumentation.(Pressure Safety Valve)
* Carried out study and analysis on anti-corrosion data
* Coordinated with service engineers for troubleshooting if necessary
* Field Instrumentation and Control Systems that I worked on include: AB PLC-5 and SLC 500 PLC, Modicon PLC, Siemens S5 PLC, Industrial Networking, telemetry system, pressure, level, weight, flow transmitters, switches, valves, fire and gas systems, Analyzers custody metering system etc

1996.7-1999.3
Instrument /Electronics Engineer
China National Offshore Oil Corp. ZhanJiang, China
* Developed instrument specifications, material lists, layout drawings, schematic drawings, material installation details, and panel layouts.
* Reviewed P&ID, Instrument Datasheet, fire and gas systems
* Project management for installation, loop checking and testing of instrumentation /PCS/computer related system
* Upgraded the existing control system and engaged in making evaluations
* Instrumentation sizing and negotiating with vendors
* Scheduled and planned daily work for contractors and technicians
* Supervised and trained operation/maintenance personnel
* Wrote operational maintenance documentation for instrumentation and control system, fire and gas system.
* Field Instrumentation and Control Systems that I worked on include: AB PLC-5 and SLC 500 PLC, Modicon PLC, Industrial Networking, pressure, level, flow transmitters, switches, valves, fire and gas systems, telemetry system, custody metering system, pneumatic/electrical/hydraulic controlled instrumentation

Education and Training

CSTS includes Generic WHIMS
H2S alive
Manlift
Fall Arrest,
Basic Underwater (Offshore) Survival Training
First Aid
Fire Fighting

2003 Bachelor of Distributed Automation and Control Systems
Information and Communication Technology Department,
Southern Albert Institute of Technology, Calgary, Canada

1996 Industrial Instrument Engineering Diploma
Electrical and Electronics Department, ChengDe Petroleum
Institute of Technology, ChengDe, China

2002 FOXBORO I/A DCS & FOUNDATION FIELDBUS
by Shell (Foxboro) Canada

2002 GE Parametric Ultrasonic Flow Transmitter by Shell (GE Parametric)

2001/2002 PLC/HMI (RSLOGIC 5, RSView32) Application by SAIT

2002 Foundation Fieldbus for Instrumentation Professionals by SAIT
2001 INTOOLS Training

2000 Microsoft Certified System Engineer Training by LiMing Network.

1999 SIMATIC S5 special course ST-S5KOMP-
Knowledge for Automation by SIEMENS Guangzhou

1998 Delta V DCS Control System by China Petroleum University

Education and Training

CSTS includes Generic WHIMS
H2S alive
Manlift
Fall Arrest,
Basic Underwater (Offshore) Survival Training
First Aid
Fire Fighting

2003 Bachelor of Distributed Automation and Control Systems
Information and Communication Technology Department,
Southern Albert Institute of Technology, Calgary, Canada

1996 Industrial Instrument Engineering Diploma
Electrical and Electronics Department, ChengDe Petroleum
Institute of Technology, ChengDe, China

2002 FOXBORO I/A DCS & FOUNDATION FIELDBUS
by Shell (Foxboro) Canada

2002 GE Parametric Ultrasonic Flow Transmitter by Shell (GE Parametric)

2001/2002 PLC/HMI (RSLOGIC 5, RSView32) Application by SAIT

2002 Foundation Fieldbus for Instrumentation Professionals by SAIT
2001 INTOOLS Training

2000 Microsoft Certified System Engineer Training by LiMing Network.

1999 SIMATIC S5 special course ST-S5KOMP-
Knowledge for Automation by SIEMENS Guangzhou

1998 Delta V DCS Control System by China Petroleum University

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6351 to 6400 of 10910)

Go to Search Parameters...

Brief Description

I am currently working for Aker Kvaerner as a Production Technician on the Tiffany platform in the North Sea for the client CNRI UK, in the Tiffany, Toni and Thelma fields. Previous to this I was a CCR/production technician for Maersk Contractors on the FPSO Curlew a 50,000bbl/day vessel in the Shel

Manager of gas contracts totalling 10M therms/day and deliveries to 1875MW Teessie Power Station

Commissioning Instrumentation Engineer with 15 years experience in industry, the emphasis being in Oil and Gas, Petrochemical, Chemical, Power Generation and Nuclear fields based Onshore, Offshore, UK, Overseas and Desert locations.

10+years Instrumentation/Electrical/Control system experience, Canadian Journeyman Instrument Mechanic Certificate, Electrician ticket: Certified Engineering Technologist

Petroleum Engineer Oilfield experience 2 years Electricity Diploma.

Material standardization, Formatted/structured coding & cataloguing, SPIR review, Inventory value optimization, maintenance engg data management(Equipment master, spec),maintenance Bill of material, MRP.SAP, Oracle financials,MESC,CMT,E-SPIR,EMA-3000,PACER-D,Teroman.12 years exp in Oil/Gas Industry.

Landman. Experience in mostly the Rocky Mountain States. Lease Acquisition, Title Research, and Right-of-way.

Seakes International employment in the oil/gas industry, in areas of completions(perforating ), Production engineering. Has 9 yrs working experience as a perforating Engineer with Halliburton energy services in Nigeria.

Honours / Master of Science Graduate in Chemistry with extensive laboratory and moderate industrial experience. Interested in chemical research and development as well as industrial experience.

Continuously enhancing my expertise in manufacturing and my education on engineering management area by consistently contributing to the company.

JOb requires for B.E. ( Fire ) and DIS safety Engineers. Experience : 12 years in Petrochemicals Industries.

I have over 15 years in the production field and consider myself a specialist. I am confident that I can prove to be an asset to your company. I am an “out of the box” thinker, capable of solving problems on all levels.

Directional Drilling Engineer with 8 years of experience working with an important International Oil Service Company, also experience in MWD / LWD, directional well planning and directional drilling services coordination. High motivated, QHSE oriented

Degree in Chemical Engineering from a prestigious university. About 9 years of Experience in teaching and training related to oil sector. Train – the - Trainer certificate from the employer. Knowledge of and experience in the use of Computer Applications. Excellent communication skills in English.

I am a mechanical engineer graduated from Hungary –Budapest in 1991, specialized in gas turbines field and I have been working for the past 9 years in gas turbines maintenance.

Ingeniero Químico bilingüe (Inglés-Español) con 3 años de experiencia en optimización y diseño de levantamiento artificial de pozos. Experiencia en programas de control de corrosión por CO2 y análisis estadístico de fallas. Excelentes habilidades en el manejo de programas de computación.

•More than 4 years of experience within the Oil and Gas Industry •2 years of experience in research, data interpretation, and analysis of results •Computer skills include Ms Office 2000, Hysys, Aspen Plus 10.2, Pro II 5.10, Full OP 8.0, Aldus Photo style, Adobe, Corel Draw

Petroleum engineer with 6 years experience in reservoir simulation, reserve estimation, field studies and economics. Broad experience using various computer programs including MS Office and STARS (reservoir simulation program). Familiar with OFM, ECLIPSE and other reservoir simulation packages

Industrial equipment installation, repair and operator training. Electrical, electronic, mechanical, hydraulic, pneumatic systems serviced. Rigging.

I am working for 6 years as reservoir geologist(1997-present) I worked 3 years as mining coal geologist (1995-1997) and 4 years as geologist for drilling prospection and exploration of mineral resources (1986-1990).

Completion Supervisor, Cementing, Acidizing, DST, Workover

Eight years experience as a Title Examiner for title companies in Texas.

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

Pre-casting, Installation, Cast in situ (Wing walls, sleepers, equipment & pipe support, cathodic protection foundations, sub-station & control buildings, RCC pipes for storm water culverts, Right of way, Sectionalizing valve stations

Worked for Exxon January thru March 2004. May of 2004 I went to work for Galleon Energy and supervised the drilling of eight holes in the Peace River Arch. Seven of these wells were gas wells from 1300m to 2300m. The last hole for Galleon was a 1600m oil well. Currently I am working for Shell Canada

M.Tech - Instrumentation and Control Systems; ABB Symphony Harmony, melody DCS - 2 years exp - Power plant Automation

Bachelor of Electrical & Electronics Engineering / Primavera P3 (3.1), MS-Project 2003, AutoCAD 2002

Recently qualified Electrical/Instrument Technician with High Voltage Experience

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

Experienced Manager in the Combined Cycle Power Plant Operations

I can operate AutoCAD and AutoCAD Mechanical, AutoDesk Inventor 9,

FOXBORO I/A DCS, PLC, HMI, supervisor, manager, FAT / SAT / SIT, design and engineering, project technical team leader

5 years extensive experience in spearheading entire gamut of manufacturing operations in areas of production design & maintenance in automobile ,automotive and packaging machines

Team work and Good communication skills

Bilingual Mechanical Engineer with 22 years experience in planning, management and maintenance.

Various Legal and Oil and Gas Administrative Experience

Profficient in surface, mineral and leasehold title research and reporting, lease aquisitions, due diligence, ROW, affidavits, oil, gas and mineral leases and other instruments.

Engineer petroleum

Electrical Engineering Manager/ Project Manager

NOV 2006 onwards. Production specialist. Petrofac Dubai

I have worked in the Barnett Shale for 5 years and am experienced in running title, creating runsheets, dealing with lessors and all aspects of curative tiel work.

Graduated from Poltechnic ITB with GPA 3.05, Skill: Application Analytical of Chmistry, capable gor using GC, AAS,ICP, Petroleum Lab Instrument Oil and Gas

Coiled Tubing Supervisor and Mechanical Power Engineer with 5 years experiance in Schlumberge oil filed service company

Civil engineer with more than five years combined experience in Civil Design, Engineering and Project Management

Eight years experience as Planning Engineer/Project Control, with a broad knowledge on project/construction engineering, cost control, and estimating. Experienced in oil & gas industry ranging from concept selection, FEED, EPC, maintenance (shutdown & non-shutdown), and decommissioning

skilled in computer, having good communication skills.

Four years Engineering experience in Oil and Gas Industry. Recently completed Process Technology

experienced in oil refinery operations,tank farm

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 128 ] 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out