Resume - Commissioning Instrumentation Engineer with 15 years experience in industry, the...

Misco Jobs

Resume #3655

CONTACT INFORMATION:
View contact information...

CONTROL & INSTRUMENTATION / D.C.S. COMMISSIONING ENGINEER

CURRICULUM VITAE

DATE OF BIRTH:
16Th November 1970

MARITAL STATUS:
Married with no dependants

DRIVING LICENSE:
Full British & International

QUALIFICATIONS:

BTEC HNC - Industrial Process Measurement And Control - 1991

N.V.Q. Level 3 Engineering Manufacture Maintenance Practices - 1991

Engineering Training Authority N.V.Q.'s
Maintenance Engineering, Electrical & Electronic Techniques, Electrical Installation, Identification And Use Of Electronic Components, Circuit Board Servicing, Electronic Test, General Health And Safety, Maintaining Motor Starting Systems, Maintaining A.C. Motors, Maintaining Circuit Protection Devices, Maintaining Electrical Distribution Circuits.

Successfully Awarded Technician Education Council Certificate In Instrumentation Measurement And Control On Completion Of Apprenticeship

PROFESSIONAL MEMBERSHIPS:

Member of The International Society for Measurement and Control (I.S.A.)

CAREER SUMMARY:

Commissioning Instrumentation Engineer with 15 years experience in industry, the emphasis being in Oil and Gas, Petrochemical, Chemical, Power Generation and Nuclear fields based Onshore, Offshore, UK, Overseas and Desert locations.

Computer Literate with all round experience in Design, Construction, Maintenance, Commissioning, Supervision, Field, Trouble Shooting, Project Management, etc.

Experience with the construction and commissioning of a wide variety of Instrument, Control and Electrical systems consisting of DCS such as, Honeywell, Yokogawa, Foxboro, Citect, Wonderware, Fisher Rosemount and Bailey as well as PLC's such as Modicon, GE Fanuc, Siemens, Allen Bradely, Triconex and Square D. I have also been involved in the commissioning of MV/LV Switchgear Motor Control Centres (MCC's).

Presently employed as a Lead C&I Commissioning Technician carrying out Commissioning of Process, E.S.D., HONEYWELL D.C.S. and Fire & Gas systems at Bayu-Undan Gas Recycle Project in the Timor Sea.

TRAINING COURSES:

Combined Offshore Survival Fire Fighting/First Aid Certificate (O.P.I.T.O Approved) - 2003
Fleetwood, United Kingdom.

Offshore Medical Certificate - 2003
Manchester, United Kingdom.

Client /Contractor National Safety Group Safety Passport (S.C.A.T.S.) Supervisor – 2003
Ellesmere Port, United Kingdom.

NETA Lifting/Mechanical Handling, Radiological Safety Of Sealed Sources, Plutonium Safety, Radiological Health And Safety, Confined Spaces Appreciation For Supervisors, Eurotherm PC 3000 Basic Training, Eurotherm ESP Basic Training, Fisher PROVOX D.C.S. Training, Allen-Bradley PLC-5 Training, Understanding CC Mail, Understanding Calendar, Understanding Word Perfect For Windows, Risk Assessor's Course, Gas Testing On Off-Shore Installations, Sopho/Philips Communications System Introduction, Sopho/Philips Communications MAC Manager, Sopho/Philips Communications Supervisor 35, Philips Radio Telephone Systems, Philips Radio Paging Systems, ABB BAILEY D.C.S. Training.

CAREER BACKGROUND:

CONOCO-PHILLIPS
Bayu-Undan Gas Recycle Project, Timor Sea.
July 2003 To Date
Lead Control and Instrumentation Technician
* Maintenance of Process, E.S.D. and Fire and Gas systems.
* Pre-commissioning and commissioning new Process, E.S.D., HONEYWELL D.C.S. and Fire & Gas systems.
* Organizing and preparing as-building drawings and updating associated documentation following upgrades to plant.

ALSTOM POWER
Wylfa Nuclear Power Station, Wales.
May 2003 To July 2003
Site Manager
* Supervising and testing the installation, pre-commissioning and commissioning of modifications to existing 11kV switchgear and 440V guaranteed supplies.
* Organizing work schedules, redesign work and project management for technicians and associated paperwork.

Manjung Power Station, Malaysia.
August 2001 To January 2003
D.C.S. Commissioning Engineer
* Supervising and testing the installation, pre-commissioning and commissioning of the ABB BAILEY D.C.S. and associated plant, electrical, instrumentation and control systems.
* Writing erection/test procedures for plant/systems. (Communications Systems/Switchgear/Un-interruptible Power Supplies/Generators/D.C.S. etc).
* Supervising a team of foreign national and expatriate technicians involved with the construction, pre-commissioning and commissioning of Manjung Power Station.
* Organizing work schedules, redesign work and project management for technicians and associated paperwork.

Shotton CHP, Wales.
August 2000 To August 2001
D.C.S. Commissioning Engineer
* Supervising and testing the installation, pre-commissioning and commissioning of the ALSTOM ALSPA P320 D.C.S. and associated plant, electrical, instrumentation and control systems.

Winnington CHP, Cheshire, UK.
August 1999 To August 2000
D.C.S. Commissioning Engineer
* Supervising and testing the installation, pre-commissioning and commissioning of the ALSTOM ALSPA P320 D.C.S., Electrical Distribution Mimic Panels and associated plant, electrical, instrumentation and control systems.
* Supervising and testing the installation, pre-commissioning and commissioning of plant telephone and radio communication systems.

Hunterston 'B' Nuclear Power Station, Ayeshire, Scotland.
September 1999 To August 2000
Site Manager
* Supervising and testing the installation, pre-commissioning and commissioning of a new Emergency Control Room, ALSPA P1200 PLC Scanners and associated plant, electrical, instrumentation and control systems.

Sual Power Station, Philippines.
January 1998 To May 1999
Construction/Commissioning Engineer
* Supervising and testing the installation pre-commissioning and commissioning of the ALSTOM ALSPA P320 D.C.S., Electrical Distribution Mimic Panels and associated plant, electrical, instrumentation and control systems.
* Supervising a team of foreign national technicians involved with the construction, pre-commissioning and commissioning of Sual Power Station.
* Supervising and testing the installation, pre-commissioning and commissioning of plant telephone and radio communication systems.
* Organizing work schedules, redesign work and project management for technicians and associated paperwork.

KVAERNER OIL & GAS
Piper Bravo & Amerada Hess 001 Offshore Installations.
August 1997 To January 1998
Lead Control, Electrical and Instrumentation Technician
* Maintenance of Process, E.S.D. and Fire and Gas systems.
* Upgrading, pre-commissioning and commissioning new/existing Process, E.S.D. and Fire and Gas systems.
* Organizing and preparing as-building drawings and updating associated documentation following upgrades to plant.

ARAMCO
Abqaiq Plants, Saudi Arabia.
Eurabia Engineering & Construction CO.
August 1996 To August 1997
Lead Instrument Supervisor
* Testing, pre-commissioning and commissioning of Fisher Rosemount PROVOX Plus D.C.S. upgrade and associated plant, electrical, instrumentation and control systems.
* Testing, pre-commissioning and commissioning of Process, E.S.D. and Fire and Gas systems that included CCC and Triplex.
* Supervising a team of both expatriate and foreign national technicians involved with the modernisation of Abqaiq Plants.
* Organising work/shutdown schedules, redesign work and project management for technicians and plant operations and associated paperwork.

BRITISH NUCLEAR FUELS ENGINEERING LIMITED
Sellafield, Cumbria, UK
June 1996 To August 1996
Lead Control, Electrical And Instrumentation Technician
* Testing, pre-commissioning and commissioning of plant, electrical, instrumentation and control systems.

NUCLEAR ELECTRIC LIMITED
Barnwood, Gloucester, UK
March 1996 To June 1996
Workshop/Laboratory Supervisor
* Responsible for setting up and running new laboratory and workshops. Including maintaining and ordering stocks of consumables and equipment. Management of repair, calibration and storage of plant and equipment.
* Provide support for Engineers and liaise and co-ordinate with contract maintenance staff, visiting Engineers and internal Electrical, Control And Instrumentation, Plant Engineering and Computer Service departments.
* Provide first line maintenance and repair of equipment, and where necessary oversee repair of specialist equipment by specialist maintenance/calibration firms.
* Set up new maintenance and calibration contracts with external contractors.
* Safety officer for laboratory and workshops with responsibility to set safe systems of work in place, maintain COSHH regulations and ensure safety of personnel using the laboratory and workshops.
* Provide assistance with building, testing and re-configuring of prototype/existing equipment.

BRITISH NUCLEAR FUELS LIMITED
Sellafield, Cumbria, UK.
September 1987 To March 1996
Lead Instrument/Computer Technician
* Maintaining both hardware and software of Computer and PLC based Control/Monitoring Systems. Systems covered included Fisher PROVOX D.C.S., Westinghouse, ABB and Eurotherm PC 3000.
* Supervising and testing the installation, pre-commissioning and commissioning of plant, electrical, instrumentation and control systems.
* Operated as part of a 24-hour on-call team to provide cover in case of breakdowns on Computer and PLC systems.
* Gained working knowledge of software and hardware of numerous Computer and PLC based Control/Monitoring systems including Fisher PROVOX D.C.S., Westinghouse, Kent/ABB, Eurotherm PC 3000 and Allen-Bradley.
* Supervised apprentice instrument technicians, giving tuition of on-site regulations and safe operating procedures.
* Supervisor for Systems Engineering Group, with responsibility over several technicians and apprentices.

Apprentice Instrument Technician
Completed fully accredited apprenticeship which covered:
* Comprehensive training in all instrument disciplines including Digital/Analogue Electronics, Pneumatics, Hydraulics and Process Control, Nucleonic, Pressure, Temperature, Flow and Level.
* Conducted planned maintenance tests and repairs on plant, electrical, instrumentation and control systems.
* Installed pre-commissioned and commissioned a variety of plant, electrical, instrumentation and control systems.
* Training in Welding, Fitting, Machining.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6351 to 6400 of 10917)

Go to Search Parameters...

Brief Description

Rotational Power Infrastructure Manager & International Quality and Safety Systems Management

Computer ?Automation & Controls Engineer

Welding Engineer, Welding Inspector CSWIP, Mechanical Engineer

corrosion failure analysis and corrosion protection

i am working as utility technician in petrolium refainary and i know very well electrical fault&problem i am know ms word/exell and data update

To pursue a challenging position which enables me to utilize my communication and technical skills in providing professional knowledge and support to the Oil and Gas and Energy industry

Mechanical Senior Engineer (Rotating Equipment)

I am currently working for Aker Kvaerner as a Production Technician on the Tiffany platform in the North Sea for the client CNRI UK, in the Tiffany, Toni and Thelma fields. Previous to this I was a CCR/production technician for Maersk Contractors on the FPSO Curlew a 50,000bbl/day vessel in the Shel

Manager of gas contracts totalling 10M therms/day and deliveries to 1875MW Teessie Power Station

Commissioning Instrumentation Engineer with 15 years experience in industry, the emphasis being in Oil and Gas, Petrochemical, Chemical, Power Generation and Nuclear fields based Onshore, Offshore, UK, Overseas and Desert locations.

10+years Instrumentation/Electrical/Control system experience, Canadian Journeyman Instrument Mechanic Certificate, Electrician ticket: Certified Engineering Technologist

Petroleum Engineer Oilfield experience 2 years Electricity Diploma.

Material standardization, Formatted/structured coding & cataloguing, SPIR review, Inventory value optimization, maintenance engg data management(Equipment master, spec),maintenance Bill of material, MRP.SAP, Oracle financials,MESC,CMT,E-SPIR,EMA-3000,PACER-D,Teroman.12 years exp in Oil/Gas Industry.

Landman. Experience in mostly the Rocky Mountain States. Lease Acquisition, Title Research, and Right-of-way.

Seakes International employment in the oil/gas industry, in areas of completions(perforating ), Production engineering. Has 9 yrs working experience as a perforating Engineer with Halliburton energy services in Nigeria.

Honours / Master of Science Graduate in Chemistry with extensive laboratory and moderate industrial experience. Interested in chemical research and development as well as industrial experience.

Continuously enhancing my expertise in manufacturing and my education on engineering management area by consistently contributing to the company.

JOb requires for B.E. ( Fire ) and DIS safety Engineers. Experience : 12 years in Petrochemicals Industries.

I have over 15 years in the production field and consider myself a specialist. I am confident that I can prove to be an asset to your company. I am an “out of the box” thinker, capable of solving problems on all levels.

Directional Drilling Engineer with 8 years of experience working with an important International Oil Service Company, also experience in MWD / LWD, directional well planning and directional drilling services coordination. High motivated, QHSE oriented

Degree in Chemical Engineering from a prestigious university. About 9 years of Experience in teaching and training related to oil sector. Train – the - Trainer certificate from the employer. Knowledge of and experience in the use of Computer Applications. Excellent communication skills in English.

I am a mechanical engineer graduated from Hungary –Budapest in 1991, specialized in gas turbines field and I have been working for the past 9 years in gas turbines maintenance.

Ingeniero Químico bilingüe (Inglés-Español) con 3 años de experiencia en optimización y diseño de levantamiento artificial de pozos. Experiencia en programas de control de corrosión por CO2 y análisis estadístico de fallas. Excelentes habilidades en el manejo de programas de computación.

•More than 4 years of experience within the Oil and Gas Industry •2 years of experience in research, data interpretation, and analysis of results •Computer skills include Ms Office 2000, Hysys, Aspen Plus 10.2, Pro II 5.10, Full OP 8.0, Aldus Photo style, Adobe, Corel Draw

Petroleum engineer with 6 years experience in reservoir simulation, reserve estimation, field studies and economics. Broad experience using various computer programs including MS Office and STARS (reservoir simulation program). Familiar with OFM, ECLIPSE and other reservoir simulation packages

Industrial equipment installation, repair and operator training. Electrical, electronic, mechanical, hydraulic, pneumatic systems serviced. Rigging.

I am working for 6 years as reservoir geologist(1997-present) I worked 3 years as mining coal geologist (1995-1997) and 4 years as geologist for drilling prospection and exploration of mineral resources (1986-1990).

Completion Supervisor, Cementing, Acidizing, DST, Workover

Eight years experience as a Title Examiner for title companies in Texas.

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

Pre-casting, Installation, Cast in situ (Wing walls, sleepers, equipment & pipe support, cathodic protection foundations, sub-station & control buildings, RCC pipes for storm water culverts, Right of way, Sectionalizing valve stations

Worked for Exxon January thru March 2004. May of 2004 I went to work for Galleon Energy and supervised the drilling of eight holes in the Peace River Arch. Seven of these wells were gas wells from 1300m to 2300m. The last hole for Galleon was a 1600m oil well. Currently I am working for Shell Canada

M.Tech - Instrumentation and Control Systems; ABB Symphony Harmony, melody DCS - 2 years exp - Power plant Automation

Bachelor of Electrical & Electronics Engineering / Primavera P3 (3.1), MS-Project 2003, AutoCAD 2002

Recently qualified Electrical/Instrument Technician with High Voltage Experience

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

Experienced Manager in the Combined Cycle Power Plant Operations

I can operate AutoCAD and AutoCAD Mechanical, AutoDesk Inventor 9,

FOXBORO I/A DCS, PLC, HMI, supervisor, manager, FAT / SAT / SIT, design and engineering, project technical team leader

5 years extensive experience in spearheading entire gamut of manufacturing operations in areas of production design & maintenance in automobile ,automotive and packaging machines

Team work and Good communication skills

Bilingual Mechanical Engineer with 22 years experience in planning, management and maintenance.

Various Legal and Oil and Gas Administrative Experience

Profficient in surface, mineral and leasehold title research and reporting, lease aquisitions, due diligence, ROW, affidavits, oil, gas and mineral leases and other instruments.

Engineer petroleum

Electrical Engineering Manager/ Project Manager

NOV 2006 onwards. Production specialist. Petrofac Dubai

I have worked in the Barnett Shale for 5 years and am experienced in running title, creating runsheets, dealing with lessors and all aspects of curative tiel work.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 128 ] 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out