Resume - I can operate AutoCAD and AutoCAD Mechanical, AutoDesk Inventor 9,

Misco Jobs

Resume #36839

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Mechanical Designer or drafter with my qualifications

ACADEMIC PREPARATION:
Diploma III in University of Pembangunan Nasional October 1995

Advisor: Prof.Dr.Moh. Arief Djanin

CERTIFICATIONS:
Coursework includes:
1. Training AutoCAD Mechanical Power Pack 6 International Certificate in Jakarta
2. Training AutoDesk Inventor 9 Essentials International Certificate in Jakarta
3. Training AutoDesk Inventor 9 Intermediate International Certificate in Jakarta

RESEARCH SKILLS:
- Piping (Plan and Isometric drawing)
- Design of Process Equipments (i.e. Pressure vessels, HE, Storage Tank, Mixing Tank etc)
- AutoCAD R14 and R2005
- MS Office 2000
- AutoCAD Mechanical 6 with Power Pack
- AutoDesk Inventor 9

LANGUAGES:
English and Indonesia

PROFESSIONAL EXPERIENCE:
PT. Samudra Ferro Engineering August 1997 - Present
Jl. Mampang Prapatan No. 97 – Jakarta 12720 - Indonesia
Project:
- Batutegi Irrigation Project (Lampung-Indonesia)
Client and Owner Public Work Deparment Scope Hydro-Mechanical and Electrical Works.
- Batang Hari Irrigation Project (Padang-Indonesia)
Client and Owner Public Work Deparment Scope Hydro-Mechanical and Electrical Works.
- Karun3 Project (Iran)
Client Farab Internationl FZE; Owner IWPC (Iran Water and Power Develoment Company)
Scope: Service Spillway Radial Gates, Hoist and Power Unit.
- Dhauliganga HE Project (India)
Client Thungabhadra Steel Products LTD;
Owner National Hydro Electic Power Corporatrion LTD
Scope: Hydro-Mechanical and Electrical Works.
- New Naga Hammadi Barrage and Hydropower Plant. (Cairo-Egypt)
Client Ministry of Water Resources and Irrigation (Ministry of Electricity and Energy)
Owner Electrowatt-Ekono (Jaakko Poyry Group)
Scope: Hydro-Mechanical and Electrical Works.
- Remedical Work Project NSO (Lhokseumawe-Aceh)
Client Exxon Mobil; Owner PT. Arun NGL & Co
Scope: Blanket Construction Contract; Civil;Piping; Mechanical; Electrical and Instrumentation Works.
- Air Separation Unit Project (Lhokseumawe-Aceh)
Client Exxon Mobil; Owner PT. Arun NGL & Co
Scope: Complete Erection (Incl. Civil-Works) of ASU plat.

As Mechanical Draftsman

- Prepare drawing acc. to Technical Specification and design calculation/sketch drawing from design engineer
- Prepare Bill of Material for each drawing.
- Communicate and coordinate with design engineer and supervisor draftsman.
- Check drawings and Bill of Material before transferred to supervisor draftsman.
- Other task assigned by Management.

PT. Wahana Esa Sambadha Sejati May 1996 - August 1997
Jl. Riau No. 97, Tanjung Sekong Merak – Indonesia
Project: Fabrication and Erection
- Lurgi Energi und Imwelt GmbH Project
Precipitator Dust Huper Raw Mill, Kiln ESP (Electrostatic Precipitator) & Clinker Cooler
- Babcock & Wilcox Indonesia Project
Fabrication and Erection of PLTU Suralaya
Turning Vanes & Radiation Shield
- Medco Rig Modification Project
3 Unit Trailer, Mud Pump Skid, Mud Tank System Rig3, Mud Premix Tank, Skid and Access platform hoke Manifold and Sub Base Fabrication.
- Mitsubishi Kakoki Kaisha, Ltd. (MKK) and PT. Continental Carbon Indonesia.
Carbon Black Expansion Project at Sumuranja Merak.
- ABB Flank Industri AB Project at Riau
Duct System After Fan
- Tlt- Babcock, Inc
Paiton Power Station Project: Inlet Box, Bell mouth, Nose Fairing, Nose Fairing, Diffuser etc.
- Signet Engineering PTY.LTD
Mirah Gold Project: Structural Steel work for Crushing, Milling Area, Leaching & Adsorption Area, Gold room and Cyanide/Caustics Mixing and Storage Area

As Assistant engineer
- Design Structural Steel Structure.
- Estimating Weight & Price for Tender.
- Check Actual Building & Prepared Shop drawing For Fabrication.
- Prepared pre-cast concrete shop drawing

PT.Daelim Utama Construction June 1995 - January 1996
Jl. Raya Anyar Km.120 Ciwandan Anyer – West Java Indonesia
Project:
PTA. Polyprima Karya Reksa
As Contract Drafter
- Manual Drawing For Steel Structure.
- Prepared Template Date by AutoCAD for Pipe Cutting.
- Check Actual Building & Prepared Shop drawing in Site Office.

PT. Toyo Engineering Corporation July 1994 - May 1995
Jl. Raya Kecamatan Ciwandan Km.123 Anyer – West Java Indonesia
Project:
Chandra Asri Petrochemical Center (CAPC)
As Contract Drafter
- Manual Drawing For Steel Structure.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5201 to 5250 of 9796)

Go to Search Parameters...

Brief Description

Ingeniero Químico bilingüe (Inglés-Español) con 3 años de experiencia en optimización y diseño de levantamiento artificial de pozos. Experiencia en programas de control de corrosión por CO2 y análisis estadístico de fallas. Excelentes habilidades en el manejo de programas de computación.

•More than 4 years of experience within the Oil and Gas Industry •2 years of experience in research, data interpretation, and analysis of results •Computer skills include Ms Office 2000, Hysys, Aspen Plus 10.2, Pro II 5.10, Full OP 8.0, Aldus Photo style, Adobe, Corel Draw

Petroleum engineer with 6 years experience in reservoir simulation, reserve estimation, field studies and economics. Broad experience using various computer programs including MS Office and STARS (reservoir simulation program). Familiar with OFM, ECLIPSE and other reservoir simulation packages

Industrial equipment installation, repair and operator training. Electrical, electronic, mechanical, hydraulic, pneumatic systems serviced. Rigging.

I am working for 6 years as reservoir geologist(1997-present) I worked 3 years as mining coal geologist (1995-1997) and 4 years as geologist for drilling prospection and exploration of mineral resources (1986-1990).

Completion Supervisor, Cementing, Acidizing, DST, Workover

Attending all the electrical breakdowns and maintaining the equipments

telecommunication engineering background (5 years), completion technician for 1 year, good experience with computer

I am having 1+ year experience in Gas Turbine.

Chief Officer with container fleet experience looking for job on Supply Vessels

Graduate (B.sc) Math. Diploma in industrial Management and also (OSHO) Occupational Safety & Health Organization

7 years of experience in the field of fabrication and welding inspection

GA Matters, good with document for tender, company asset and controlling

B.TECH IN MECHANICAL ENGINEERING,

Work in Information Technology environment and be a Specialist in Vibration

Mechanical Engineer searching for work in Doha, Qatar. Strong understanding of oil & gas industry documents, equipment, design and operation. Experienced in management, teamwork, leadership, interdisciplinary work. Motivated, responsible, determined. Excellent written and verbal english skills.

Eight years experience as a Title Examiner for title companies in Texas.

BSc in Financial Management with eleven years of solid cost controlling and accounting experience and strong organizational, technical, and interpersonal skills. Areas of expertise include: GL, AR, AP, Budgeting, Cost Engineering, Data Analysis and Modeling. Experienced in use of spreadsheets, word-

Supervise pre-commissioning, testing and commissioning activities for both static and rotating equipment systems.

Piping Designer / Bently, AutoCad 2008

Worked for Exxon January thru March 2004. May of 2004 I went to work for Galleon Energy and supervised the drilling of eight holes in the Peace River Arch. Seven of these wells were gas wells from 1300m to 2300m. The last hole for Galleon was a 1600m oil well. Currently I am working for Shell Canada

I have about two years of professional experience with a major Oil & Gas E&P Company in Pakistan and presently I am working as Production (Petroleum) Engineer with Production Engineering department. My areas of experience include production engineering/ technology, well completions, wellsite operati

I worked in Mumbai offshore in Oil & Gas production platforms under ONGC for 8 years. i am hardworker and i capable to work at anyplace.

process control instrumentation,balance of plant, design engineering , procrument engineering, control valve sizing, analising process and instrumentation diagrams, input output list etc

Looking for DRILLING supervisor positions

I have experience in both the oil and construction business. I am a recent graduate looking to find a job in my hometown of Bakersfield. Please take a minute to review my resume.

BSC degree in Applied Physics aand instrumentation, worked as Junior automation Engineer for 1 year before Working as an Instrument Technician for Statoil in Norway for just over a year before coming to Australia.

Chemical engineer+ HYSYS 3.2

Well Design,planning,monitoring drilling,wprkover jobs ,tendering,contracting etc

M.Tech - Instrumentation and Control Systems; ABB Symphony Harmony, melody DCS - 2 years exp - Power plant Automation

Bachelor of Electrical & Electronics Engineering / Primavera P3 (3.1), MS-Project 2003, AutoCAD 2002

Experienced Manager in the Combined Cycle Power Plant Operations

I have 25 years experience in hoisting & lifting operations within the oil & gas industry

35 years nursing experience in most disiplines

Engineering experience of construction projects; piping system and water resources

I can operate AutoCAD and AutoCAD Mechanical, AutoDesk Inventor 9,

FOXBORO I/A DCS, PLC, HMI, supervisor, manager, FAT / SAT / SIT, design and engineering, project technical team leader

Graduated from Poltechnic ITB with GPA 3.05, Skill: Application Analytical of Chmistry, capable gor using GC, AAS,ICP, Petroleum Lab Instrument Oil and Gas

Sales and Marketing functions with a high level of technical emphasis in selling product line, Reservoir Engineering Tech.

skilled in computer, having good communication skills.

Four years Engineering experience in Oil and Gas Industry. Recently completed Process Technology

experienced in oil refinery operations,tank farm

Analytical mind and Strong numerical skills

Mechanical Engineer with eight years experience in constuction and maintenance field, Currently Maintenace Engineer in Oil and Gas field. AWS certified Welding Inspector

5 years experience as a Mechanical Design Engineer includes project management, generating modeling using Pro-Engineer and determining stress analysis using finite analysis software Ansys 8.0, geometric modeling in Gambit to solve flow and heat transfer problems in Fluent 6.1 and energy-efficient HV

Qualified physician in oil fiel, long experiense in emergencies in remote areas and medevacs by road and by plane, good experience in safety and health risk assesment.

I completed my B.Tech in Electronics & Instrumentation in 2008 . C,C++,EMBEDDED SYSTEMS, UNIX, Window98/2000, Windows NT/XP.

QA Senior Specialist

Over 26 years experience within the oil, gas and pharmaceutical industries with extensive experience in operations, maintenance, materials control and logistics both onshore and offshore. Familiar with all types of oil and gas plant equipment and materials. Offshore and Onshore experience

CFD (Pursuing), SAP (Maintanance)

First Prev 101 102 103 104 [ 105 ] 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out