Resume - Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Des...

Misco Jobs

Resume #3733

CONTACT INFORMATION:
View contact information...

EXPERIENCE

09/2006 – To Date Total Paris, France
Usan Umbilical Lead Engineer (Contract)
As the lead Umbilical Engineer I am responsible for all the technical aspects of the umbilical work package from technical bid appraisal to design through manufacture and including installation. I report to the UFR Package manager.

The Usan system involves the supply of approximately 70km of umbilical in a total of over 30 individual sections. This involves the management of a large number of interfaces, particularly with the SPS contractor.

I have an umbilical Engineer reporting to myself and have to interface extensively with the SPS and FPSO teams to ensure the smooth integration of the umbilical package within the whole Usan Project

01/2006 – 09/2006 Saipem Paris, France
Riser Monitoring Engineer (Contract)
Responsible for the definition of the scope of supply for the Akpo riser monitoring system. This is a complex monitoring system required to monitor both the stresses and motions of the top and bottom of the production SCR's and both ends of the OOL's.

Subsequently the position involved numerous bid review meeting, bid appraisals and eventual recommendation for the supplier of the system.

During this time I was also involved in some bid support work for umbilical and power cable systems.

8/2004 – 01/2006 Stolt Offshore Paris, France
Lead Umbilical Engineer (Contract)
As the Senior Engineer I am responsible for all the technical aspects of the umbilicals required for the Greater Plutonio Development. This project includes both dynamic and static umbilicals containing steel tubes, electric cables and fibre optic cables, being supplied by two umbilical manufacturers.

Functions include managing of all technical aspects of the subcontract to a major umbilical manufacturer and liasing with the ultimate end user to ensure that all umbilicals are supplied on time, fit for purpose and on budget.

My responsibilities also cover the technical management of the riser tower monitoring instrumentation, covering load cells, motion sensor and Pressure and temperature monitoring.

9/1999 - Present Wellstream North Sea Newcastle Upon Tyne UK
Principal Engineer Product Development

As a Principal Engineer I am responsible for a team of 7 engineers who undertake all of the product development work for the company. The team has developed a number of products that have extended the company's design envelope. The Development budget amount to several $ million. Often development was required against tight deadlines to ensure that the product was adequately qualified to allow the company to bid or supply to all the major clients in the Offshore oil industry.

Prior to this position I was a senior engineer, responsible for a team of 3 engineers whose function is to review customer specifications, and design flexible pipes and pipe systems to meet their requirements. The following lists the main functions of this job:

Design of non-bonded flexible pipes in accordance with API Standards.
Flow simulation, using PIPESIM.
Dynamic analysis of riser systems, using Orcaflex.
On bottom stability in accordance with DnV Rules.
Reel calculations.
Writing technical reports.
Presenting and discussing ideas with customers.
Developing novel solutions to unusual problems.
Listing technical exceptions.

7/1998 - 9/1999 Wellstream Inc Panama City Florida
Senior Design Engineer

Main activity involved detailed engineering work on an integrated umbilical and flexible riser system, for connection between a floating facility and seabed equipment. Some of the main skills acquired were:
Analysis of complex non-bonded structures.
Defining requirements for thermo-plastic hoses.
Defining requirements for electric cables.
Defining requirements for fibre-optic cables.
Developing detailed manufacturing and test procedures.
Developing complex end termination assemblies.

8/1990 - 7/1998 DUCO Ltd Newcastle upon Tyne
Umbilical Design and Development Manager

I was responsible for a team of engineers who designed both static and dynamic umbilicals in accordance with international standards and customer requirements.
The designs were submitted in detailed technical reports and presentations to the customer.
I also wrote and presented technical papers at a number of major international conferences.

8/1984 - 8/1990 Dunlop Oil and Marine Grimsby
Development Engineer

As a graduate engineer I went through an in-depth training program within the company spending time working in all the main functional departments, including Manufacturing, Quality, Inspection and Test.
Subsequently I designed and developed large bore bonded flexible pipes for use at offshore oil loading terminals and for dredging.
I had to present technical papers each year at the companies own technical forum held on site for all their major customers.

Sole company representative during offshore installation work worldwide.

EDUCATION
8/1984 Thames Polytechnic UK-London-Woolwich
Bachelor's Degree

I was awarded an upper second (2:1) in Mechanical Engineering.
The course was a four-year thin sandwich course with three periods of industrial placement, one of which was spent working in Sweden developing specialised test equipment.
My final year project involved developing a specialised pick up nozzle for bulk solid conveying, for which I was awarded a prize for the best project.

7/1980 Norwich city college UK-Norfolk-Norwich

I completed a 2-year TEC Diploma in mechanical Engineering.

7/1978 Wymondham College UK-Norfolk-Wymondham

Math Pass Grade B
Science A Pass Grade C
Science B Pass Grade B
French Pass Grade C
Economics Pass Grade B
Design and Technology Pass Grade B

SKILLS

Skill Name Skill Level Last Used Experience
AutoCAD Expert Currently Used 10 years
OrcaFlex Intermediate Currently Used 5 years
Pipesim Beginner Currently Used 1 years
MathCad Expert Currently Used 10 years
Microsoft Word Expert Currently Used 12 years
Microsoft PowerPoint Intermediate Currently Used 8 years
Microsoft Excel Expert Currently Used 10 years
Microsoft Project Intermediate Currently Used 2 years
Lotus 123 Intermediate 3 years ago 5 years
Lotus CC Mail Intermediate 3 years ago 5 years
Microsoft Outlook Expert Currently Used 5 years
French Beginner Currently Used 15 years

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 10917)

Go to Search Parameters...

Brief Description

PMO, Planning, Project manager, Program Director

Reliability, Maintenance, Planning and Material Engineer- Mechanical

More than 15+ years experience in process operation

Telecom field technicians Customer end

Procurement, Contracting, Logistics and Inventory management

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

I´m Chief OFFicer wiyh tanker experience and Other Ships like Tug Boat, whit 7 years at sea, 10 yeras in oil and marine industry, Ship Yards, Port Operations, Manager in Logistics Deparment, Sipply Chain, Desk and Administrative work.

Telecom

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

Dear Sir. I would like to forward my resume with this letter to yourself in the hope to find an entry level position in your respected company like a electro engineer... My main skills are hard working; take good care of my job & keen to progress.

I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

QA/QC Instrumentation Engineer / Inspector - 17 years experience in Oil & Gas (16+ years in Middle East with Saudi Aramco, PDO, KNPC, ADNOC & RAS LAFFAN), Certified Lead Auditor, GCC & International Driving License, Well versant with Codes & Standards

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

unigraphics designer drafter

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

Free! Scheduler EPC Gas & Oil P3, P5 and P6

Instrument, production,control room technician, shift supervisor on chemical plant. worked off shore on shell dunlin,cormarant and nelson, british gas morecambe bay,conoco sns, wellhead control,subsea. on shore i.c.i., dupont, ukaea, power stations. Tricon , modicon plclc

Extensive field and office Piping Design experience: including Detail Design, Construction, Supervisory and Management levels as well as; the coordination of design effort on projects, both in the Supervision of office and field personnel. The writing of piping and pipe support specifications (both

At present I am working with EASA HUSAIN AL-YOUSIFI & SONS CO., KUWAIT as a Secretary to Project Engineer from 15th February, 2006.

Free! Safety professional with proven national and international track record, demonstrated, through a successful 14-year safety and health management career, ability to lead poorly performing facilities to top quartile performance. Experience at corporate division, and facility levels.

Technical Manager Maintenance Planner, Semisubmerisble engineer, hydraulic engineer, diesel engineer

I have worked in the oilfield for 39 yrs as seaman, bosun, crane op, and barge engineer/master.

P.ENG with 14 years experience in reservoir management,reservoir engineering analysis, economics evaluation,well testing

•Personnel Supervision / Training / Evaluation

Offshore Crane Operator/Technician/ Lifting Specialist

Total 14 years of Post Qualification Experience out of which 4 years of Experience in Oil and Gas & Refinery Piping Design and 10 years in Power Plant Piping. Total Experience consists of Piping Detail Engineer-ing, Physical Design Deliverables and Stress Analysis

A self motivated and result oriented professional with 11 years experience in various Industries such as Oil & Gas drilling and Community Services using latest technologies. In recent past I am working in the areas of drilling, administration, customer relations and services and training/development

Sr. Piping Designer/Checker

Plant commissioning, trouble shooting, revamps, cost reduction, productivity improvements

Logistics and Operations Support included construction management transportation and Procurement Management FCILT MS UC Berkeley in transportation engineering with 24 years experience, recent 10 in Oil and Gas

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

Total of 33 yrs exp with 15 yrs international exp in oil and gas as wellsite/geosteering geologist in Carbonate and Clastic reservoirs, gas detection/mud logging, description of cores and drill cuttings, interpretation and correlation of electrical logs

HSE Process Safety

Fourteen plus years of international experience in the wireline logging industry with one of the leading oilfield service providers. Worked my way up from Wireline Field Engineer through several roles to my latest job as a Field Service Manager

over fifteen years of working experience in oil & gas , onshore and offshore facilities

Desired to work in an organization that recognizes and values individual contribution in a professionally challenging way which will broaden the fine skills and will provide opportunities for continues growth and development with utmost devotion and sincerity, there by strengthen the organization to

Staff Petrophysicist with a wide range of skills in petrophysics, over 20 years experience working in many parts of the world.

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Efficient and Self-motivated Process Personnel

NAME SANJEEV S. KULKARNI QUALIFICATION : MECHANICAL ENGINEERING EXPERIENCE : TOTAL 25 years oil field

Refinery process engineer

i worked in a mudlogging unit for 13 years; i'm a unit manager , i'm IWCF Certified, i know deeply all the drilling operations

Petrochemical Engineer seeks challenging assignment in Middle East

I am a successful, experienced and qualified Start up Specialist, Commissioning Production Supervisor, FPSO Trainer with over 28 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Topsides Manager..FPSO

Senior Operator with 14 years experience in refinery , Oil&Gas and petrochemical plants

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out