Resume - Highly qualified geotechnical engineer with sound engineering knowledge and judg...

Misco Jobs

Resume #37410

CONTACT INFORMATION:
View contact information...

QUALIFICATION
B.Eng. (Hons) Civil Engineering 1999
University Teknologi Malaysia

M.Eng. (Geotechnic) (Completing in April 2006)
University Teknologi Malaysia

PROFESSIONAL BODY
Board of Engineers, Malaysia: Member

PROFESSIONAL EXPERIENCE
2005 - Present: Taisei Coorporation
2 x 700MW Coal Fired Power Plant, Lukut, Port Dickson

- Employed by Taisei Coorporation for geotechnical design control and optimisation.
- Planning and supervising onshore and offshore soil investigation works.
- Interpretation of soil investigation works for the purpose of foundation and ground treatment design.
- Carrying out design check and optimisation on all the geotechnical work such as:
- Reclamation in sea front
- Ground treatment for reclaimed land as well as shore area
- Structural Foundations, piling consists of large diameter bored pile and spun piles of various sizes, onshore and offshore
- Pile cap and piled raft structural design including design for centrifugal and reciprocating machine foundation.
- Dealt with various design codes available as follows:
- BS-
- DIN-
- JP-
- ASTM-

1999 - 2005: GCU Geotechnics Sdn Bhd
Jalan Sultan Iskandar Shah - Jalan Tambun Bridge, Ipoh, Perak for JKR

- Analysis of SI results and property characterisation for Foundation Design.
- Analysis and design of bored pile foundation for bridge piers and abutments employing large diameter bored Piles in highly karstic limestone formation.
- Pile group analysis using 'PIGLET' for all the deep foundations proposed.
- Proposed cavity treatment for foundation works.
- Analysis of test results and optimization of pile foundation.

Putrajaya - Kuala Lumpur Dedicated Highway, Package 6

- Analysis of SI results and property characterisation for Foundation Design.
- Analysis and design of foundation systems for all the bridges employing large diameter bored Piles in Kenny Hill formation.
- Pile group analysis using 'PIGLET' for all the deep foundations proposed.
- Analysis of test results and optimization of pile foundation.

Bridge over Selat Mendana, Senai - Desaru Highway, Ranhill

- Analysis of SI results and property characterisation for Foundation Design.
- Analysis and design of foundation systems for bridge consisting of large diameter bored Piles and large diameter spun piles in marine environment.
- Optimised design catering for easy construction in marine environment (bridge on sea / strait).
- Pile group analysis using 'PIGLET' for all the deep foundations proposed.

Delhi Metro Railway Tunnel and Underground Station, New Delhi, India

- Analysis of SI results and properly characterisation for geotechnical design.
- Design of temporary retention system for multi strutted sheetpiled excavation for tunnel, underground station and ramp right next to busy road and existing buildings.
- Planning of staged excavation and construction of tunnel beneath Nala River for Najafgarh crossing beneath the existing bridge.
- Pile foundation design for the underground station and the temporary and new bridge across Nala River for Najafgarh crossing.
- Used finite element design for all the excavation works using 'PLAXIS' and also 'WALLAP'.

Regional Logistics Hub (Phase 1), MISC Integrated Logistics, West Port, Pulau Indah

- Analysis of SI results and property characterisation for geotechnical design.
- Delineation of highly variable subsoil layers over Marine clay and reclaimed land.
- Pile foundation design for the building areas, and ground treatment for the container stack yard and infrastructure facilities based on analysis and site evaluation.

Depot and Workshop for KTMB, Batu Gajah, Perak

- Analysis of SI results and property characterization of the whole site.
- Delineation of highly variable subsoil layers over Limestone Formation and reclaimed ex-mining land with numerous mining ponds.
- Analysis and design of mining pond reclamation using replacement method with surcharge preloading and prefabricated vertical drains.
- Pile foundation design for the structures on very soft overburden and slime.
- Ground treatment design consisting of excavation and replacement, deep vibratory compaction and surcharge preloading with prefabricated vertical drains for all the infrastructure facilities and also main track areas depending on subsoil nature.

Training School and Staff Quarters for KTMB, Batu Gajak, Perak

- Analysis of SI results and property characterization of the project site.
- Delineation of highly variable subsoil layers over Limestone Formation and reclaimed ex-mining land with numerous mining ponds.
- Analysis and design of mining pond reclamation using replacement method with surcharge preloading and prefabricated vertical drains.
- Pile foundation design for buildings with base slab designed to be slab on grade.
- Ground treatment options for infrastructure facilities.

Permanent Inlet Opening in Deep Diaphragm Wall Pump House, Bukit Raja Development

- Analysis of ST results and property characterisation of subsoil
- Planning of 2.5m x 2.5m opening without jeopardizing existing diaphragm wall structure.
- Analysis of existing diaphragm wall structure.
- Design of stiffener beam to counter the loss in structure due to opening.
- Adopted coring method for the opening.
- Used 'PLAXIS' for design works.

Remedial Works for Large Failure in Filled Embankment, Eco Setia Park, Bukit Raja

- Analysis of SI results and property characterisation of the failed location.
- Back-analysis of the failure condition based on observational method.
- Proposal of remedial options consisting of changing the founding levels of the building platform and the adjacent highway, using stone columns to arrest the movement and failure, using contiguous boredpile wall as a containment.

Ampang and Shah Alam TNB Substation

- Analysis of SI results and property characterisation.
- Review of the proposed retention and foundation systems.
- Analysis and Design of contiguous bored pile walls.
- Proposed, Designed and implemented stone column for fill slope stabilization works

Attorney General's Chambers, Putrajaya

- Analysis of SI results and property characterisation for foundation and deep basement design.
- Planning of temporary works for three level basement excavation.
- Analysis and Design of 'Island Cut Method' for temporary excavation as part of top down construction system.
- Analysis and Design of single boredpile and barrette pile systems.
- Analysis and Design of plunging columns comprising of steel columns plunged into single pile system.
- Utilised 'WALLAP' and 'PLAXIS' for design works.

LNG Plant in Bontang Satu, Kalimantan, Indonesia

- Analysis of SI results and property characterisation for ground treatment and foundation design.
- Analysis and design stone column and surcharge preloading with prefabricated vertical drain works as part of ground treatment solution.
- Evaluation of various foundation types for structures on ground and in marine environment.
- Analysis and design of foundation consisting of driven piles and bored piles of various diameters for port, jetty and support for pipeline over the sea and on land.

Pulau Tioman Airport on Sea

- Planning and execution of SI works.
- Analysis of SI results and property characterisation for Geotechnical Design.
- Analysis and design of large scale reclamation.
- Analysis and design of ground treatment options and foundation options on the reclaimed land as well as at the sea front.
- Pile group analysis using 'PIGLET' for all the deep foundations proposed.

NSE - Guthrie Corridor Expressway Connection

- In charge of the SI planning for the whole Area.
- Analysis of SI results and property characterisation for Geotechnical Design.
- Analysis of dissipation test results.
- Slope stability analysis and recommendations on slope stability improvement for cut slopes and fill slopes for the whole stretch using WINSTABL.
- Analysis and design of cut slopes, fill slopes and soil nail reinforced slopes.
- Proposal, analysis and design of ground improvement schemes.
- Complete replacement.
- Foundation and bearing capacity design for infrastructure works as well as retaining walls such Reinforced Earth Wall and RC retaining walls.
- Planning of instrumentation scheme and production of drawings for the all the geotechnical works.

MAJU Heart and Lung Facility, Bandar Tasik Selatan

- Analysis of SI results and property characterisation for foundation design.
- Delineation of highly variable subsoil layers over Limestone Formation and reclaimed ex-mining land.
- Pile foundation design for the structures on very soft overburden and slime.
- Advice on foundation for infrastructure works.

The Proposed Khalifa bin Salman Port and Industrial Area at Hidd, Kingdom of Bahrain

- Analysis of SI results and property characterisation for ground treatment and foundation design.
- Analysis and design of foundation systems for port, jetties and wharfs consisting of large diameter bored Piles and spun piles in marine environment.
- Pile group analysis using 'PIGLET' for all the deep foundations proposed
- Analysis of test results and optimization of pile foundation.

Resak Offhore Gas Terminal, Kerteh, Terengganu

- Planning and execution of S1 works
- Analysis of SI results and property characterisation for foundation design.
- Evaluation of various foundation types for structures in marine environment and considering highly explosive appurtenances.
- Pile foundation design for structures such as buildings, flare stack and all the pipe lines.

Proposed Marina in Muar for Johor State Government

- Analysis of SI results and property characterisation for foundation design.
- Pile foundation design for structures on highly compressible thick marine clay.
- Foundation for proposed Jetty and wharf.
- Evaluation of various foundation types for structures on reclaimed land considering existing Jetty and nearby structures.

Merbau Chondong Raw Water Intake, Machang, Kelantan

- Analysis of SI results and property characterisation for foundation design.
- Planning of Shoring Systems.
- Analysis and Design of Strutted and cantilevered Sheet Pile Cofferdams of various depths for permanent and temporary shoring systems.
- Subgrade reaction design and analysis of the cofferdam using 'WALLAP' for all the retention systems.
- Analysis and Design of Deadman anchors for permanent sheet pile retention system.
- Planning and production of drawings for the geotechnical works.
- Back-analysis using 'PLAXIS' to counter check the effectiveness of the design.

Mixed Development at Kampung Baru Ampang, Mukim Ampang

- Analysis of SI results and property characterisation for foundation design.
- Pile foundation design for Apartments located on Limestone Formation of highly karstic feature and ex-mining land.
- Costing analysis and evaluation for various foundation types.
- Analysis of pile test results.
- Planning and production of drawings for the geotechnical works.

MRT Segmental Viaduct for Dubai Palm, and Dubai Creek, Dubai, UAE

- Analysis of SI results and property characterisation for Foundation Design.
- Analysis and design of foundation systems for bridge consisting of large diameter bored Piles in marine environment.
- Optimised design catering for easy construction in marine environment (bridge on sea to man made island).
- Pile group analysis using 'PIGLET' for all the deep foundations proposed.

Muar River Raw Water Intake

- Analysis of SI results and property characterisation for foundation design.
- Planning of Shoring Systems.
- Analysis and Design of Strutted Sheet Pile Cofferdam of 24m depth.
- Subgrade reaction design and analysis of the cofferdam using 'WA1,LAP'
- Analysis and Design of Bracing system Using Universal Beams.
- Analysis and Design of Micropile foundation for intake structure.
- Planning and production of drawings for the geotechnical works.

Projek Jalanraya Pos Betau - Lembah Bertam, Pahang Darul Mukmur

- Planning and execution of SI works.
- Analysis of SI results and property characterisation for geotechnical design.
- Planning and design of cut slopes on residual soil for various heights i.e. 6Otn.
- Slope stability analysis and recommendations on slope stability improvement for cut slopes entire stretch using 'WINSTABL'.
- Analysis and design of soil nail reinforced slopes.
- Planning of instrumentation scheme and production of drawings for the all the geotechnical works.

New Pantai Expressway (Segmental Construction)

- Planning and execution of SI works.
- Analysis of SI results and property characterisation for Foundation Design.
- Analysis and design of Hand-dug Caissons of 2.6 to 3.5 m diameter and 25 - 35 m depth.
- Proposal and execution of caisson load test.
- Analysis of caisson load test results.
- Analysis and design of foundation systems for bridges (Bridge 5, 6, 7, 8, 19, 22, 23, 24) employing various types of deep foundations such as RC Spun Piles, large diameter bored Piles and micropiles at various subsoil formations like granite, Kenny Hill and limestone formations.
- Pile group analysis using 'PIGLET' for all the deep foundations proposed.
- Single pile analysis using 'WALLAP' for all the caissons.
- Analysis of test results and optimization of pile foundation.

Rawang - Ipoh Electrified Double Tracking (EDT)

- Analysis of piezocone results for stone column design.
- Analysis of reinforced concrete raft resting on stone columns using finite element software 'SAFE'.
- Design of stone column treatment (vibro replacement).
- Design of cement columns.
- Finite element Analysis of cement columns and stone columns using 'SAGE CRISP' and 'PLAXIS'.
- Design of stone columns s an alternative solution for piled embankment for all the roads over rail.
- Design of Deep Mixing (Cement Column) as an alternative to Stone Columns.

Guthrie Corridor Expressway (Shah Alam to Kuang)

- Involved in SI planning for the whole Area.
- Analysis of SI results and property characterisation for Geotechnical Design.
- Analysis of dissipation test results.
- Slope stability analysis and recommendations on slope stability improvement for cut slopes and fill slopes for the whole stretch using ¡¥WINSTABL¡¦.
- Analysis and design of cut slopes, fill slopes and soil nail reinforced slopes.
- Proposal, analysis and design of ground improvement schemes.
- Complete replacement.
- Partial replacement with / without surcharge preloading.
- Staged Construction of embankments on soft soil with geotextile reinforcement.
- Stone column design as an alternative to piled embankment.
- Foundation and bearing capacity design for infrastructure works as well as retaining walls such as KeyStone Walls and RC retaining walls.
- Analysis and design of mining pond reclamation.
- Reinforced embankment design using high tensile geotextile to reduce differential settlement.
- Planning of instrumentation scheme and production of drawings for the all the geotechnical works.

CRS Station, KLIA for Express Rail Link (ERL)

- Supervision of SI works.
- Proposal of alternative Foundation system.
- Analysis and design of alternative foundation system.
- Plan, Design and Supervision of Osterberg Cell test for bored pile foundation.
- Analysis and interpretation of Osterberg Cell test results.

Express Rail Link (ERL) KL Sentral to KLlA

- Analysis of SI results and property characterisation for Geotechnical Design.
- Analysis of dissipation test results.
- Slope stability analysis and recornmendations on slope stability improvement for cut slopes and fill slopes for the whole stretch using 'WINSTABL'.
- Analysis and design of cut slopes, fill slopes and soil nail reinforced slopes.
- Proposal, analysis and design of ground improvement schemes.
- Complete replacement.
- Partial replacement with 1 without surcharge preloading.
- Staged Construction of embankments on soft soil with geotextile reinforcement.
- Stone column design as an alternative to piled embankment.
- Geotechnical and structural analysis for box culverts (box and pipe).
- Geotechnical and structural design of Caternary and Backstay pole (Overhead Contact Line Poles) foundations.
- Geotechnical and structural design and analysis for cantilever retaining walls and anchored contiguous bored pile wall.
- Supervision of bored piling and micro piling works.
- Supervision of soil nailing and subsoil drainage works.
- Supervision of QA and QC works for subgrade layers.
- Supervision and analysis of lab test results for soil and materials.
- Planning of instrumentation scheme and production of drawings for the geotechnical related works.

Batu Pahat - Air Hitam - Kluang Federal Road Upgrading Works for JKR

- Supervision and coordination of additional soil investigation along Batu Pahat - Air Hitam stretch.
- Involved in independent geotechnical audit.
- Planning and execution of instrumentation scheme.
- Remedial design on failure of an embankment built on marine deposits overlain by peat.

COMPUTER PROFICIENCY
Possess excellent computer knowledge.

ENGINEERING SOFTWARE
PLAXIS (Finite Element)
SAGE Crisp (Finite Element)
WINSTABL (Slope Stability)
SlopeW (Slope Stability)
GGU Stability (Slope Stability)
GGU Stratigraphy (Soil Stratigraphy)
WALLAP (Deep Excavation and Retention Systems)
RESSA (Reinforced Earth Slope)
PIGLET (Pile Group Analysis)
ROCKPACKIII (Rock Engineering)
STAAD PRO (Structural Analysis and Design)
SAFE (Fini9te Element Slab Analysis and Design)
AutoCAD Release 2006

OTHER SOFTWARE
Microsoft Office (Excel, Word, Powerpoint, Publisher, Access, Front Page)
Microsoft Project
Microsoft Visual Basic 6 (Programming Language)
Corel Draw
Adobe Photoshop
Adobe Acrobat (PDF Maker)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8501 to 8550 of 10926)

Go to Search Parameters...

Brief Description

Corrosion Specialist, API-510 certified, Nace CP and Coatings, Chemical Inhibition

Drilling Engineer, Drilling Supervisor

Comprehensive leadership abilities, excellent verbal and written communication skills, Ability to deal with people diplomatically.

Post grdaution - MBA (Finance), Graduation - BE ( Mechanical Engineering) with Power and Steam Generation Projects, Operations and Maintenance Experience

Experianced Well Services Supervisor. Working in the North sea on various contracts. Supervising all Well Interventions performed on Installation, Semi or Jack up. Liasing with Installation to ensue smooth running of operation in a timely and safe manner.

B.tech Mechanical

Ability to work with minimal supervision, Ability to work in a multi disciplinary team, Good communication skills, Ability to carry out sample Descriptions and Analysis,

11 Years of Experience in implementation of the General Safety of Employees, equipments & Work Permit System, Accident Investigation & analysis, Identification of actual & potential Safety Hazards in respect of Health, Safety & Environment, Carrying out project safety inspection, Job Safety Analysis

SAP MM, PM

Highly qualified geotechnical engineer with sound engineering knowledge and judgement to serve the industry efficiently.

HSE Learning/Development Professional seeking position in an industrial setting.

2:1 Honours degree in construction management and Engineering.

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

23 years in safety field in Petroleum Refineries, Petrochemical Plants, Pipeline Projects, Well Services, Wireline Operations, and Wastewater Treatment. 8 years with Safety Instructor tasks, 7 years in Construction Projects, 5 years with Q/A Q/C tasks, and 7 years in Managerial level

Fire Safety Engineer

Challenging business financial management position specializing in accounts and budgeting

* Stand watch and fire boilers kept logs, made reports as required.

Material Controller with 4 year experiance

Experience in Oil and Gas Industry, Marine, Certifications, and more

Fully qualified Diesel Mechanic. NVQ Level 3 in Heavy & Light Commercial Vehicles. HGV C+E Licence. ADR Licence. 13 years experience with Mercedes Benz. Numerous Mercedes Benz Certificates held.

Profile: A qualified Senior Geological Observer who has gained over 15 years experience in offshore basin analysis, subsurface analysis and diamond exploration with De Beers Marine, the company leading the search for offshore diamonds in the world.

I have grinding experience, forklift driving license, welding experience, I have a G.E.D. Strong, Hard worker, easy to train for the right job. Goal oriented and a very driven person wanting to suceed.

As a Projects Management Professional with 12 years of diversified experience in GCC countries and India, I managed, coordinated and successfully completed prestigious EPIC contracts with multinational and state owned clients such as Qatar Petroleum, RasGas, Fluor, CB&I, Petroleum Development of Oma

As Field coordinator at BHPBilliton Suriname explorations (Aluminium) for 3.5 years i have had various safety,basic first aid and devensive driving training. TOLOV and Basic firefighting as well. Furthermore was i responsible various HSE related field tasks.

Communications skills, Team player, Document Control, Information Management, Archivinng, Scanning & EDMS

Condition monitoring

Mechanical Engineer, EIT

Highly Trained Manager

Worked as a landman on the Haynesville Shale for Chesapeake Energy

I have served as the catalyst for successful Operations, Production, Projects, Technical Support, Client Relationship Management and Team Management, complimented by Bachelor’s Degree in Engineering (B.E) – Electrical & Electronics , Bachelor of Science (B.Sc) in Physics & Six sigma –Green belt

KEY SKILLS: Document Control, Data Control, Administration, Project status update, Web Designing & Programming in ASP.NET, VB.NET, Web Applications, and Access Programming.

Experiences as QA/QC inspector and Welding in the Inspection sector at various International & national Company. Employment within the Oil & Gas, Power Plant, Structural Steel, Pipe Mill, Floating Production Storage Offloading FPSO (Offshore), Platform Modification (Offshore), Refinery and Pressure

Engineering Analysis :CEASER - II (STATIC analysis),PDMS,Programming language ¡§C¡¨, AutoCAD, SolidWroks, Ansys, Primavera, Elite, Ms-Office, Excel, Word, Windows Xp, 95.

I am a Mechanical Engineer who passed out from University of Moratuwa, Sri Lanka. I obtained Second Class Upper division pass for my degree. Currently I am working as a Design Engineer (Pressure Vessels) in a Malaysian steam boiler manufacturing company.

Maximo,Brio Reports,Oracle,SQL Server,Vb.Net

I am expecting the job from oil and gas field in Russia/CIS

Piping engineer

resume for employment

ten years experience in Safety compliance 5 years experience Sourcing and Purchasing 5 years experience in Industrial production

Total of 7 years Experience. I am familiar with all kinds of fire fighting systems and fire detection system and safety equipments in offshore.

- Most Recently, Over 2 years experience as a E&I and Piping Buyer for a Japanese EPC Contractor. - 11 months experience as a Buyer for a Japanese EPC Contractor - Over 3-1/2 years experience as a Junior Buyer/Spares Co-Ordinator

I am an Instrumentation Technician for the last 7 years both training and working in Ireland and seeking work aboard that would suit my skills and training.

Develop, implement, supervised and monitor continual safety and training programs. Work successfully with client representatives to manage compliance with Loss prevention, Environmental, Project Management and client requirements satisfactorily.

B.Sc. HONS with 7 years of expe. in HSE field in oil & gas secter

Quality Assurance, Quality Control, Inspector, Sr. Inspector, Sr. Surveyor, QA/QC Inspection Engineer– Supply / Construction, Quality Coordinator / Administrator, Procurement Quality Inspection Services Manager / Coordinator, Expeditor, Lead Mechanical Engineer.

Project Coordination

I would like to work in IT department to give the company from what I gain experiance and knowledge

PDS, Micro Station, AutoCAD

Accounts Payable & Receivables, Bank Reconciliation, Debtos and Creditors Reconciliations, Corporate Taxation, Defereed Taxation, Part of Reporting, Inter Companies balances

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 [ 171 ] 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out