Resume - Navigational skills, Stability, Mangement

Misco Jobs

Resume #38303

CONTACT INFORMATION:
View contact information...

A professional Barge Engineer/Ballast Control Operator with twelve (12) years marine experience including last years experience within the offshore oil and gas industry. Experience includes movement of semi-submersible rigs, experience with different type of Ballast systems (Valmarine, Honeywell, Norcontrol), navigation of oil/chemical tankers and other vessels. High experience as Safety/Navigational Officer including cargo and ballast operations on Chemical/Product tankers.
Operation & maintenance of communications system including GMDSS equipment, INMARSAT, VHF, UHF, Telex etc.

EDUCATION
Diploma in Nautical Science
Lithuania Marine College, Klaipeda, 1999-2003 Courses: Navigation, Hydrometerology, Seamanship Engineering, Electronics, Computer Programming, Calculus, Physics, Chemistry, Stability and Ship Design.

Bachelor Maritime Nautical Diploma.
Lithuania Marine Academy, Klaipeda, 2005-2006
Master Degree

Stability and Ballast Control for Semi-Submersibles(Aberdeen).
Stability 1,2,3

EMPLOYMENT HISTORY
2007-Present barge Supervisor onboard Transocean Richardson(Angola)
2006-2007 Barge Engineer onboard semi-sub Etesco Millennium(Brazil)
2003 -2006 Stability section(Barge Engineer),Ballast Control Operator onboard the semi submersible drilling vessel "Scarabeo 6".
Company: Saipem/GPS, Italy.
Duties: Daily stability reporting including deck load surveys, consumables used / rec'd, ballast and bulk tank status. Log keeping records.
Ballast / De-ballast as required within operations manual guidelines. Maintain Ballast / Bilge systems to ensure stability and watertight integrity for safe daily operations. Anchor winch driver/operator.
Assist during vessel moves. Work Supply / Anchor vessels.
Monitor Fire & Gas detection systems around rig. Monitor various alarm panels for Engine Room and Drilling equipment. Permit control centre. Function test all control room systems reporting any faults.
Assist with Platform maintenance system.

2001-2003 Chief mate on the different types of chemical tankers(12 000- 22 000 DWT)
Company: Stolt Nielsien Transportation Group,Norway
Duties: Navigational watch, chart maintenance, publication correction,
Port papers work, Cargo watch-during loading/discharging different types of chemical products. I have been responsible for the scheduling and co-ordination of a Safety and Navigational duties according with the
ISM code of Company and IMO standards. Deck log, Drill report, weather Log etc.
Stability calculation, Ballast operation, responsible for all safety equipment on board, Medic assistance.

Aprl-Aug 2000 Pumpman/Bosun on chemical tanker Amber.
Company: Transmarrine AS,Denmark
Duties: Tank Cleaning operation, Helmsman, Deck work.

May-Sept 1999 Team Leader during repair works on the different types of vessels on Ship yards, dry docks Klaipeda (Lithuania), Gdynia(Poland)
Duties: Organization deck works(preparing surfaces for painting,
Double bottom work). Member of fire team, Crane operator.

Aug-Dec 1998 Able Seaman on seismic survey supply vessel Geofjord.
Company: Geoconsult, Bergen, Norway
Duties: Member of fire team,member of helideck crew, Crane operator.

CERTIFICATES and QUALIFICATIONS
Chief mate(Marine Supervisor)-2006
Officer in charge of a navigational watch on ship of 500 gross tonnage or more
-II/1,-V/1. Lithuania 2003.
Electronic Chart Display and Information System courses (ECDIS). Norway 2003.
Cargo Courses for chemical and oil product. Latvia 2004.
Stability and Ballast Control for Semi-Submersibles. Scotland(Aberdeen) 2005.
Framo hydraulic cargo pump operation, handling and maintenance. Norway 2004.
Basic Offshore Safety Induction and Emergency Training included HUET and EBS.
Italy 2005.
Offshore Fire Emergency Response Team Member. Italy 2005.
Offshore Fire Emergency Response Team Leader. Italy 2005.
Hydrogen Sulphide(H2S) courses. Italy 2005.
HOC Card Training. Egypet 2005.
Honeywell system courses for Ballast Control Operator. Manchester UK 2005.
Chemical tanker Advanced training (A-V/1). Latvia 2004.
Oil tanker advanced training programme(A-V/1).Latvia 2004.
Medical first Aid.( A-VI/4-1).Latvia 2003.
Medical care. Lithuania 2005.
Personal survival techniques,fire prevention and fire fighting,elementary first aid,personal safety and responsibilities(SOLAS).Lithuania 2005.
GMDSS General Operator( IV/2).Lithuania 2003.
Operational use of automatic radar plotting aids(ARPA). Lithuania 2002.
Radar observation and plotting. Lithuania 2002.
Fire prevention and Advanced fire fighting( A-VI/3 ).Latvia 2001,Lithuania 2005.
Proficiency in survival craft and rescue boats ( A-VI/2-1).Latvia 2001,Lithuania 2005.
USA Visa from 2001.
Voyage Planning courses.Norway 2003.
Satellite Navigation-GPS courses.Norway 2003.
Cargo Compatibility courses. Latvia 2004.
Seamens Book (Lithuania)- exp.2013.
Cayman Island Seamens Book.
Cayman Island License – exp.2008.
Liberian Seamens Book.

HOBBIES: Computers, Auto, Cinema, Reading, Football.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6801 to 6850 of 10917)

Go to Search Parameters...

Brief Description

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

Piping design engineer having 4 experience in ,PDS,CADWORX 2008 AUTOCAD 2008.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 [ 137 ] 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out