Resume - Over 15 years experience of Project Management and Specialist Engineering on num...

Misco Jobs

Resume #3903

CONTACT INFORMATION:
View contact information...

Experience includes LS and reimb contracts for, FEED, EP and EPC project scopes involving both stick built and PAU (modularised) construction philosophies.
Have worked on assignments in Italy, UK, Kazakhstan and Poland.

2001 - 2003    Project Manager ¡V Sulphur Technology Group, Parsons E&C Europe Ltd.
Overall responsibility for the bidding and execution of Conceptual, FEED and Detailed Engineering projects within the Process Technology Group.
Responsibilities include developing and managing proposals including sole responsibility for budget and schedule. Negotiating agreements and contracts. Managing a multi-disciplined team, monitoring progress, direct client contact, overall budget responsibility.
    2001    Principal Project Engineer.
ƒÞ Shell Goldeneye, Scotland
Responsible for the management of a team of engineers, preparation of enquiry packages, technical bid reviews and control of purchase orders.
Project responsibilities include: control of manhour and lump sum budgets, contributions to monthly reports, point contact for the mechanical engineering group and overall responsibility for producing deliverables to meet project schedules.
    2000 ¡V 2001    Senior Project / Construction Engineer
ƒÞ Construction Site, Conoco, Humberside.
Responsible for the engineering and site erection of all mechanical equipment. Project managing the site erection and hook-up of two fired heater package units with responsibility for site contractors from a multitude of disciplines.
    2000    Principal Project / Package Engineer
ƒÞ Fabrication shop, Italy
Project engineering large fired heater vendor package ensuring full compliance with all contract requirements.
    1999 - 2000    Senior Fabricated Equipment Engineer
Responsible for the design, selection and engineering of all types of static equipment including Hydrofining reactor, columns, vessels, shell & tube exchangers, air coolers and fired heaters. Full technical responsibility up to delivery to site.
    1999    Mechanical Engineer
Design, selection and engineering of various types of mechanical equipment to international codes, standards and client specifications. Preparation of enquiry requisitions, technical bid analysis and purchase orders.
Mechanical design of pressure vessels and heat exchangers to ASME VIII Div.1 and 2 and BS 5500. Also involved in pump selection and basic heat transfer design. Attended various vendors¡¦ works in the UK and overseas for technical meetings.
    1997    Construction Engineer
ƒÞ Mechanical, Esso Fawley.
Supervision of the installation and commissioning of mechanical plant. Dealing with any technical queries arising from the installation of any mechanical plant or piping. Providing feedback to vendors in connection with non-conformances and dealing with change requests.
    1995 - 1997    Mechanical Engineer
Multi-disciplinary secondments including the following engineering disciplines: piping, pressure vessels, instruments, process systems, electrical and construction.

Projects include:
ƒÞ Fawley Miscellaneous Projects, Esso Fawley Refinery
ƒÞ CATS Terminal, Amoco UK Ltd EPC Contract.
ƒÞ Sulphur Unit, Gdansk Refinery, Poland. LSTK EPCM Contract.
ƒÞ Messaied Refinery Expansion, NODCO, Qatar. FEED Contract.
ƒÞ Phillips Waste Water, Bacton, Norfolk EPC Contract.
ƒÞ Saras Hydrocracker, Saras, Sardinia. EPC Contract.
ƒÞ TCO Sulphur Forming Project, Kazakhstan. EPCM Contract.
ƒÞ Conoco DHDS Unit, Humberside, UK LSTK EPCM Contract
ƒÞ Shell Goldeneye Project, Scotland. FEED Contract.
ƒÞ Sulphur Unit, Samir, Morocco. FEED Contract.
ƒÞ Encana Buzzard Field AGR Unit, FEED Contract.
ƒÞ Sulphur Plant, Gasco, Ruwais, Abu Dhabi, FEED Contract.
ƒÞ BP Kinneil, Mercaptans Removal Unit. Process Study.

    1984 - 1994    Design Engineer, British Gas plc

Education / Professional Development
ƒÞ BEng (Hons) Mechanical Engineering, Kingston University, Faculty of Technology
ƒÞ MSc Management in Construction, Conditions of Contract module.
ƒÞ HNC in Mechanical Engineering, Mid Kent College of Technology
ƒÞ ONC in Mechanical and Production Engineering
ƒÞ CPD Courses
- The Perfect Claim ¡V Contract Law
- 52 contractual nightmares and their resolution
ƒÞ Strathclyde University
- Pressure Vessel Design (BS 5500)
- Advanced Pressure Vessel Design by analysis (BS 5500)
- Storage Tank Design & Inspection
ƒÞ Cranfield School of Management
- ECITB ¡V Project Management for Engineering Contractors
- ECITB ¡V Advanced Risk Analysis.
Registration / Affiliations
ƒÞ Member of the Institution of Mechanical Engineers
ƒÞ Chartered Engineer

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5901 to 5950 of 10924)

Go to Search Parameters...

Brief Description

significant experience as Production operator in Oil & Gas Production and Processing industries around FOUR years experience.  Reviews unit operation data(shift supervisor /engineer log ,etc)and analyses this data to determine potential problems and ensure that unit operatio

Experinced in process activities as well as technical service dept.Handling production of oil manufacturing such as metalworking fluids,wax,grease etc.,giving support to serivce engineers if any required.

More than 10 years experience in the petroleum, petrochemical, power, chemical weapons demolition, sheet metal and bridge manufacturing with quality assurance and quality control functions with current qualification as AWS CWI and API 510. Included is new construction, unit turnarounds, vender surve

Diploma in PETRO CHEMICAL TECHNOLOGY

QA/QC, NDT INSPECTION, CONSTRUCTION QA/QC & CERTIFIED LEAD AUDITOR

Project Engineer Subsea (Oil & Gas)

I am a science graduate Mumbai University, India. I am in Instrumentation field form last 10yrs. I had an excellent opportunity to work on different types of field instruments, On-line Gas chromatographs (PGC), different types of analysers, D.C.S., E.S.D. andPLC.

I have an excellent amount of experience in the Personnel/HR management 12 years (1996 – present). My current position is HUMAN RESOURCES MANAGER /ADVISOR, Abu Dhabi.

seven years of experience in process engineering support, basic and detailed engineering, commissioning, and plant operation of gas sweetening (using specialty solvent, MDEA), dehydration of the sweetened gas, polyethylene terephthalate production and wastewater treatment units

Experienced mud engineer

Experienced gas Pipline Engineer and Strong background in Petroleum Engineer

Senior instrument technician

A system engineer with more than ten years experience in process control and oil field development and implementation.

Key Qualities 10 years experience in plant design and piping lay-out. 4 years experience in using Intergraph’s PDS 3D system. Experienced in Auto Cad, Microstation, Autoplant 3D Finished PDMS training course, Modules 1 and 2

Field: Technical Services (Petroleum Fuels) Experience: 10 years (6 years in Petroleum Sector)

I have been associated for the past 10 years with Fertilizer & Petrochemical Industry. I have worked as a Senior Metallurgical Engineer with specialization in the field of welding technology, non-destructive inspection techniques & product analysis and its development.

I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.

Experienced (~10 years) specialist in electronics and IT / former army officer. Languages: German, English, Basics in French and Spain Skills: PLC, instrumentation, electronics, computers

Onshore pipeline(above ground/ buried)and Plant piping engineering and design. Stress analysis-using CAESAR-II, for static, dynamic, wind, earthquake, flange leakage, Slug, and Water Hammer analysis. Familiar with concerned codes viz.ASME,API,WRC,etc.

PRESENTLY WORKING AS VICE PRESIDENT - TECHNICAL WITH M/S.AEGIS LOGISTICS LTD.MUMBAI,INDIA

My present Job as well as the work I did for Santa Rosa w/ the Syzemograph will be what pertains to the oil & gas Industry

Work Experience of 7 years - presently working with GE Capital Intl Services in India (From past 5 years). Presently working as Asst Manager

static equipment, storage tanks, API650, pressure vessels, ASME, fluent English, good German, MSc, Bsc, petrochemical, oil

I am responsible for all instrumentation, maintenance modification, and repairs for plant machinery and furnace maintenance. I have strong supervisory experience in a petrochemical plant. My experience also includes extensive electrical/HVAC knowledge.

A Professional and Versatile QA/QC and Inspection Engineer with 10 years effective hands on experience in QA/QC ,NDT and Welding inspection,

Production Geologist - Onshore Texas and Mid-Continent. Strong background in operations, log analysis and correlation, seismic interpretation and computer mapping, prospect evaluation, and well planning. Extensive background in fractured carbonates and horizontal drilling operations.

Graduate Mechanical Engineer with I firm foundation in power generation, mechanical-thermal design, solid modelling, heat transfer, CFD, thermodynamics, project management and manufacturing experience.

Position as Contracts Administrator using 10 years of experience as oil and gas industry contract consultant and contract compliance auditor.

DRILLING ENGINEER: Experience in drilling design engineering in horizontal, directional and verticals wells. Specialist in horizontal drilling, SAGD well drilling projects, trajectory well design, casing design, bit selection and drilling softwares. experience in drilling project planning.

A self confident, motivated and energetic person, able to cope with rapid change in corporate culture, strong technical analysis, management and computer skill, able to work under pressure, willing to learn.

Seven years experience.

Russian speaking geologist with an MBA in finance seeking position with an international oil and gas exploration company in corporate planning, project management or finance.

I am an international business transaction professional, with five years experience specializing in the rail transportation and oil industries. I am currently an MBA student specializing in international business.

As an active electrical designer within radar, sonar and instrumentation for ten years, Fabian has a unique experience with respect to product design and manufacturing efforts. His work within an ISO9000 system has produced solid craftsmanship, with due to diligence to Quality Control.

Engineer, 10 Years experienced, Construction management of industrial projects

I have Worked has Process Control Room & Field Operator in Indian Organic Chemicals Limited, Chennai, India for 14 years and has Control Room and Field Operator Oman Chemical Industries Limited (S.A.O.G), Oman for 2 years

Over 15 years experience of Project Management and Specialist Engineering on numerous project task forces in the oil refining and gas processing industry.

More than 15 years of Oilfield experience and Drilling Services with Schlumberger. worked in many countries in different positions starting from Engineer Trainee to Staff Engineer, Rig Manager, Operations Manager and now (SDS) QHSE Manager worldwide.

I have over 10 years of experience as a Rotating Machinery / Reliability Engineer in various industries. I am looking for a full time or contract position overseas as a rotating machinery engineer.

Fully experienced manager/agent within the water/utilities industry

Excellent Safety Record. Excellent Communication Skills. Exemplary Drilling Record. Over 16 years of supervisory experience of oilfield personnel & operations.

as incharge operator at catalyst production unit and process operator at the ammonia plant Experience in units- : kneaders,extruders calciners,heaters,Turbines, Centrifugal compressors, Boilers, Super heaters, Reformers, MEA& HPC Systems

Eighteen years Electrical experience in the Offshore, Petrochemical, Power Generation, and Natural Gas Processing industries. Project Manager, Hook-Up & Commissioning, Supervisor of E & I Design staff and E & I contractors on projects. Budgeting and Procurement experience.

11+ years of experience in Procurement, Materials, Inspection & Expediting positions

Management of QA (Quality Assurance), Planning, Scheduling & Project Control

Chemical Engineer, Drilling Fluids Engineer, Process Engineer

Procurement specialist with supply chain experience. I am versatile, bilingual(spanish),proven difference maker and leader.

Cost/Budget Controls Manager

Proficient in Integraph Plant Design System (3D PDS) and its software including Piping Designer, Equipment Modeling, Microstation, AutoCAD, SPR (Smart Plant Review), Batch Manager, Isometric Extraction and knowledge in Microsoft Windows.

I have completed my diploma & degree. I have completed my NDT ASNT Level 2, I have more than 5 years experienced in the field of NDT technician.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 [ 119 ] 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out