Resume - Having acquired skills in Geology and Applied Geophysics, I will like to work in...

Misco Jobs

Resume #3934

CONTACT INFORMATION:
View contact information...

RESUME

(A) PERSONAL DATA:

SEX: Male
DATE OF BIRTH:- 26 October 1977
STATE OF ORIGIN: Ogun
NATIONALITY: Nigerian
MARITAL STATUS: Single

(B) HIGHER EDUCATIONAL BACKGROUND:
Obafemi Awolowo University Ile-Ife, Department of Geology-
B.Sc. (Hons) Geology, 2nd Class Upper.

(C) PROFESSIONAL EXPERIENCE:

1. (i) Place of Work: - E M R Nigeria Ltd (An Indigenous Drilling Company), Lagos.
(ii) Title: Industrial Trainee Well Site Geoscientist
(iii) Year / Period: March – September 1996, September 1997 – December 1997
and March 1998 – August 1998.
PROJECTS / DUTIES: -
(a) Preparation of concise Geological report of the area of survey
(b) General Site Investigation
(c) Taking notes of measurement while drilling e.g. Temperature, Pressure etc.
(d) Handling of Geophysical equipment e.g. the ABEM Terrameter, Global
Positioning System (GPS) for Ground measurements before carrying out drilling.
(e) Execution of open/case hole drilling for water at Bauchi and Sokoto States
(State Rural Water Project)
(f) Maintenance of efficient inventory of exploration and production data
(g) Organization, Planning and safeguarding collection of geoscientific data

(2) (i) Place of Work: - Department of Geology, Obafemi Awolowo University, Ile – Ife. Osun State.
(ii) Title: - Private Research Assistant to A DAAD Visiting Professor, Dr. F.C Fieberg
(iii) Year/Period: - Dec. 1999 – March 2001
PROJECTS / DUTIES: -
(a) Geophysical Fieldwork Assistance in the Exploration of Gold at Ipole, Ajubu, Ilesha (SW Nigeria). The geophysical investigation involved the use of Proton Precession Magnetometer (PPM), Fluxgate Magnetometer (FGM), Altimeter etc.
(b) Interpretation of Observed Magnetic Anomalies over SW parts Nigeria using Airborne Magnetic Survey Maps.
(c) Interpretation of Borehole Magnetic data (KTB – data), Germany, results of which delineation of geological structures e.g. Faults, fractures were found.
(d) Interpretation and correlation of composite well logs (SP log, Gamma Ray log, Neutron – Density Log over certain parts of Niger delta and Benue Trough from which petrophysical parameters were evaluated.
(e) Preparation of accurate well – site geological evaluation reports on every set of well logs interpreted.
(f) Maintenance of efficient inventory of exploration and production data
Organization, Planning and safeguarding collection of geoscientific data

(3) (i) Place of Work:- National Centre for Remote sensing (NCRS), Jos
(ii) Title: - Scientific Officer /Personal Assistant to the Director / Chief Executive of NCRS (National Youth Service Corps Program)
(iii)Year / Period:. May 2001 – May 2002
PROJECTS / DUTIES: -
(a) Use of Geographic Information system (e.g. ILWIS 2.0 & 2.2, ARCVIEW and ERDAS IMAGINE 8.4)/ Remote Sensing Application for Map making, Site selection and simulation of environmental effects on parts of Niger delta and Benue trough where producing and potential Oilfields exist.
(b) Liaising with the Exploration Department of Nigerian Mining Corporation (NMC), Jos where geoscientific results that would help NMC to foster her operations are required from the centre (NCRS)
(c) Landslide Investigation on Shere Hill, Angware, Jos –East, Plateau State.
(d) Photogeological Interpretation of parts of the Benue Trough for Mineral Resource potential via Aerial photographs, SPOT and Landsat TM Imageries.
(e) Maintenance of efficient inventory of exploration and production data
(f) Organization, Planning and safeguarding collection of geoscientific data

(4) (i) Place of Work: - China Geo-Engineering Company (CGC), Jos (Contract
Employment).
(ii) Title: - Well Site Geologist
(iii) Year/Period: - May 2001-May 2002
PROJECTS / DUTIES: -
(a) Groundwater Exploration using VES Schlumberger Array using YDD and DWD Terrameter at Bogoro, Bauchi State, Nigeria (Federal Ministry of Water Resources Rural Water Project)
(b) Monitoring Site Work during Drilling
(c) Well Log Analysis and Interpretation
(d) Preparation of accurate well – site geological evaluation reports on every set of well logs interpreted.
(e) Maintenance of efficient inventory of exploration and production data
(f) Organization, Planning and safeguarding collection of geoscientific data

(5) (i) Place of Work: - Department of Geology, Obafemi Awolowo University, Ile –
Ife, Osun State.
(ii) Title: - Private Research Assistant to A DAAD Visiting Professor, Dr. F.C.
Fieberg
(iii) Year/Period: - May 2002 till date
PROJECTS / DUTIES: -
(a) Geophysical Fieldwork Assistance in the Exploration of Groundwater at Osun and Ekiti State (SW Nigeria). The geophysical investigation involved the use of VES Schlumberger configuration.
(b) Interpretation of Observed Magnetic Anomalies over parts of Niger delta and Benue trough using Airborne Magnetic Survey Maps.
(c) Estimation of basement depths (Sediment` thicknesses) from modelling and curve-fitting techniques from results of (b) above
(d) Integration of results from (c) above with the interpretation of composite well logs (SP log, Gamma Ray log, Neutron – Density Log) over certain parts of Niger delta and Benue Trough from which petrophysical parameters were evaluated.
(e) Preparation of accurate well – site geological evaluation reports on every set of well logs interpreted.
(f) Maintenance of efficient inventory of exploration and production data
(g) Organization, Planning and safeguarding collection of geoscientific data in the
Library

(D) PUBLICATIONS:
1. Thesis: - Magnetic Investigation on A Fault Zone on Obafemi Awolowo University campus, Ile-Ife (Unpublished), 2000.
2. Seminar: - Mineral Resources of the Oceans (Unpublished), 2000.
3. Paper: - Fatunmbi, A.O. and Fieberg, F. (….). Quantitative Interpretation of Magnetic Anomalies Measured on OAU campus (Unpublished)

(E) AWARD (S)/OUTSTANDING RECORDS RELATED TO FIELD OF STUDY:
1. Year 2001 Nigerian Mining and Geosciences Society (NMGS)/EXXON-MOBIL Prize for the B.Sc. Thesis Titled "Magnetic Investigations On A Fault Zone On OAU campus".
2. Best Graduating Student in the Department of Geology/Applied Geophysics, Obafemi Awolowo University, Ile-Ife (1998/1999 Session).

(F) MEMBERSHIP OF PROFESSIONAL BODIES:
Member of Nigerian Association of Petroleum Explorationists (NAPE)

(G) CONFERENCES AND WORKSHOPS ATTENDED:
1. Ultra Deep Water Potential in the Niger Delta, Blind Thrusts and Sand Fairways (and a couple of volcanoes), NAPE Technical Meeting, January 1999.
2. Advances in Geophysics in Deep Water Environment, NAPE Technical Meeting, February 1999.
3. Deep Water Prospecting, Challenges and Opportunities in the Next Millennium, NAPE Annual Conference, 1999.

(H) ANY OTHER RELEVANT INFORMATION:
1. Languages: - English fluently written and spoken
2. Computer Literacy: - Skilful in Programming, Usage of Microsoft Office and Usage of other Professional Programs e.g.LATEX,TEXCAD, AUTOCAD, GNUPLOT, GPS Trakmaker etc.
3. Hobbies: - Reading, Writing Articles, Travelling, Sports

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7151 to 7200 of 10816)

Go to Search Parameters...

Brief Description

I have completed diploma in mechanical engg with first class and also have 8yrs exp in the field of engineering and manufacturing

25+ years experience as Operations Manager in the Resources and Oil & Gas Sectors. Formal qualifications in Engineering and Business.

A competent leader with 3 years of experience within HSE Management in the upstream and downstream Oil & Gas Industry

Seeking a challenging full-time position as an engineer in a dynamic oil & gas organization

Experienced Contracts Manager professional with CLA credential, MBA (December 2009) and proven track record with more than 15 years of business expertise in financial analysis, logistics, engineering, FAR knowledge, strong legal background, and project management.

Technician Mechanical Maintenance

I have a good experience working as Wellsite Geologist for both exploration and development wells (vertical & horizontal). I am familiar with field geological operations and possess good expertise in the Winlog software program. I have good computer skills and fluent in written and spoken

I have Bachelor Dagree in Chemical Technology and have 6 year working experince in refining field in operation

Objective A challenging role in an organization which offers tremendous growth potential and wide exposure to the latest technologies fully utilizing my skills. Work Experience 2+ Years experience in System Analysis and Network Engineer. 4+ Years experience as Materials Engineer

NQF, National Qualification Forum, Qualified as Production Artisan Grade 4

Chemical Engineering Degree and 6 years in Cathodic Protection.

20+ years in Control Systems Engineering/Design. Experienced Intools user.

Having five + years experience in continuous process plants as a senior engineer.

Free ! YOUNG POTENTIAL in FINANCE & ADMINISTRATION

working with Siemens for the past five years in Piping Design & Engineering. expert user in PDS also work on Stress analysis(Static & Dynamic) of various piping sytems using "Caesar". been to Design/ Site offices abroad in Germany & Kuwait.

MSc Chem. Eng. Wide experience in project management, developing, supporting, monitoring, analyzing plans for projects. Develop budgets, define targets for expenditures and oversee execution. Assist management monitoring projects execution. Integrate individual reports to a global report.

Seeking for opening in QAQC and Inspection

Objective: I am seeking a full-time mechanical engineering position. I am looking for a position that will challenge and augment the skills and knowledge I have obtained while providing valuable service to the company.

I am an experienced design engineer working on an oil and gas related projects, worldwide. I am proficient in AutoCAD 2002, Microstation, 3D Plant Design Systems, Smart Plant Review, and INtools.

I am experienced in construction works for oil&gas industry. Have good working knowledge of standards like EEMUA 158, AWS D1.1, ASME Sections VIII, IX and B31.3, RMRS Rules for Construction of Ships, etc. Proficient in planning & scheduling of construction projects using Primavera & MS Project.

Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up within your organization. I am therefore looking for a job as a Roustabout.

OBJECTIVE : Geological Engineer - Over 6 years‘ geological engineering experience - Extensive knowledge of geological formations - Educational background in geology engineering - Able to self-train on new geological software - Responsible, team player, hard working

Cost/Planning Engineer with a Mechanical Engineering background and specialized studies. 5+ years experience. Proven outstanding performance under extreme unfavourable conditions and security threats. Proficient in Primavera, MS Project, spreadsheets. Other :MS e-enterprise, Access and VB

Science major with sales negotiation experience

OBJECTIVE To acquire an entry-level position in petroleum or a research position in or relating to mechanisms of asphalting instability in crude oils, interfacial properties of natural surfactants.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

Hands on experience in Installation, Maintenance of Computer controlled Machines, Video Monitors, Indoor & Out door Ac / Dc Motor Controlled Amusement Equipments, Touch Screens, and Power Supply, and Also Maintain NT Server and 10 clients & Hands-on Experience in Servicing Laptops etc.

A progressively challenging position in the area of Instrument Engineering, where past experience and proven abilities can be fully utilized. The preferred position would provide an opportunity for continued professional growth and advancement.

Having acquired skills in Geology and Applied Geophysics, I will like to work in a challenging Oil and Gas Environment.

Geophysicist Having deep knowledge in seismics and data processing. Also knows gravity and magnetics.

As I am having good experience in Electrical field, working as a Electrical Technician for a contractor employee in Kuwait National Petroleum Company, Mina Al Ahamadi Refinery

I am a well experienced process engineer in oil & gas industry. I am happy to work abroad for long durations. I am an Australian citizen presently working in Perth, Australia. I have a solid 12 yrs experience in oil & gas process design.

Management, Logtics, Cost Control, Sales

Highly motivated individual with strong FEA experience. As a stress analyst, I enjoy analysing the products that designers design, highlight potential problem areas and ultimately help product development by saving cost. My aim is to make product more durable and cost effetive.

I am a qualified geologist who graduated from the Ecole Nationale d’Ingénieurs du Mali (ENI) in 2001

qulification;having my 2years of industrial training instuite(iti),work exp; 8 years in refinary& 2 years in power plant having a capacity of (300*8 )MW

Electrical & Instrument Designer

I am a Petroleum and Natural Gas Engineer having an MSc degree in Petroleum and Natural Gas Engineering from Istanbul Technical University, Istanbul TR.

I did my M.Tech in applied geophysics from IIT Roorkee,india which is the one of the best technical institute in india.in this course I learn seismic prospecting, well logging and non - seismic methods. I did my summer training in O.N.G.C. Dehradun, India and also did industrial training in O.N.G.C

Dedicated and highly motivated instrumentation & control engineer

Have worked in oil industry for 4 years doing fracking, cdl driver,acidizing .

Production Operator

HSE officer with 6yrs of exp. having Nebosh, Iosh, Osha etc.

I have more than fifteen years of progressive professional experience and have matured from a background in material / inventory control, coordination, and warehousing techniques for oil and gas maintenance, construction and manufacturing industries.

Oil and gas production operator level 1

Over 18 years of extensive experience Maintaining a Safe Work Culture, Budgeting, Strategic planning, Policy Development/Implementation, Finance/Leasing, Fleet Maintenance/Management

Strong motivation for deepening of knowledge on engineering geophysics, both theoretical and practical. Willing to travel, strong and stable character, able to work in long shifts and under pressure. Interested in learning new technologies. Perfectionist in problem solving

Holder of Diploma in Computer Systems Analysis and Design

Experienced Seismic Observer

Experienced Supply Chain Manager

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 [ 144 ] 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out