Resume - 15 Years of HSE experience in oil & gas field.

Misco Jobs

Resume #3949

CONTACT INFORMATION:
View contact information...

OBJECTIVE

Applying for a position in HSE, Quality, or any related field that I may utilize my experience.

EXPERIENCE

2001 – Present Danos & Curole Marine Contractors LLC (Marine & International Division) Larose, LA

Manager of Marine Regulatory Compliance
* Responsible for creation and implementation of ISO 9000 and International Safety Management (ISM) programs into the Marine and International Division for locations in the United States and Africa.
* Obtained ISO 9000 and International Safety Management (ISM) Certifications through American Bureau of Shipping (ABS) for the office and vessels.
* Currently working on ISO 14000 Certification to gain the ABS QSE Certification.
* Responsible for all regulatory, environmental, and safety issues, both domestically and international, pertaining to the vessels in the Gulf of Mexico and Africa.
* Responsible for conducting USCG, ISM, and ISO audits and identifying training needs for the Marine and International Division.
* Member of the Safety Management Committee and the Quality Committee and attend various Customer project meetings and industry functions.
* Currently working on Vessel Security Plans and Safety Cases for project work activity.

1996- 2001 Hunting Oilfield Services

Operations Manager – Marrero Manufacturing Facility
* Responsible for the Quality, Safety, and Financial results of facility, and directly managed 70 employees working two ten hour shifts.
* Reviewed monthly financial statements and submitted projections to Senior Management based on projected revenue.
* Completed customer bids and negotiated long term contracts, performed some outside sales functions.

Health, Safety and Environmental Manager – Western Hemisphere
* Responsible for implementing a new Safety and Environmental Management System in compliance with OSHA, DEQ, TNRCC, and EPA regulations in four U.S. facilities in Louisiana and Texas, and two facilities in Venezuela.
* Managed all Safety and Environmental issues and records also managed Worker's Compensation claims for Human Resource Department.
* Reported results to senior management.
* Conducted HSE audits in all facilities international and domestic and submitted Discharge Monitor Reports to LADEQ for one Louisiana facility.
* Was made member of Executive Team, which met monthly to discuss company issues and strategy.
* Established scheduled Safety training, audits, and management meetings in the various facilities.

1994-1996 Murphy Exploration and Production

Safety and Training Specialists
* Responsible for and conducted safety and training activities for the Ship Shoal 114 production field working a 7/7 schedule.
* Performed USCG audits and inspected safety equipment on all platforms in the field.
* Performed project safety duties on various special projects in the Gulf of Mexico to include construction, workover operations, and drilling activities.
* Monitored all third party activities and issued Permits to Work in all locations.
* Conducted and evaluated emergency drills and safety training on the platforms.

1990-1994 J. Ray McDermott (Marine Division) Morgan City, La

Senior Safety Representative
* Responsible for Safety on one self-propelled Derrick Barge (Ocean Builder 1) and one Pipe Bury Barge (Bury Barge 316).
* Perform frequent visits offshore to audit vessels for compliance to Coast Guard regulations, company safety polices, and safe work practices.
* Served on various project safety teams to ensure JRM project activities are in compliance with customer expectations.
* Maintained the OSHA 200 Log for J. Ray McDermott, Inc. (Marine Division).
* Secretary for the Accident/Incident Review Committee.
* Member of the Subcontractor Safety Committee, and performed Safety Audits on Labor Subcontractors to ensure they meet or exceed JRM HSE expectations/requirements.
* Monitored Safety in the Bayou Black Facility and conducted audits weekly.
* Generated and maintained all Safety Statistics for the Marine Division.
* Performed Competent Person duties in the Bayou Black Yard and in other facilities where loadouts were occurring.
* Responsible for obtaining and setting up operations for Explosive Loadouts for Salvage Operations.

EDUCATION

1994-1998 Nicholls State University Thibodaux, LA
* A.S., Petroleum Safety – Graduated Spring 1998 (Obtained Degree at Night while working full-time.)
* Deans List Spring 1998

Work Related Education
* Six Sigma Quality Green Belt Training – Motorola University - Pennsylvania, PA
* Confined Space Competent Person
* Water Survival
* H2S Training
* United States Coast Guard Port Operations School – One month school, which taught various topics such as Environmental Response, Bulk Oil Transfer Regulations, Port State Control, MARPOL, and SOLAS regulations. Course also met HAZWOPER First Responder Awareness, HAZWOPER First Responder Operations, and HAZWOPER On Scene Incident Commander training.
* ABS Maritime Officer Training (Per the ISPS Code) to meet new Homeland Security regulations
* Skills & Processes for Successful Negotiation – Tulane University College
* USCG Streamline Inspection Program (SIP) Training

MILITARY EXPERIENCE

1998-Present United States Coast Guard Reserve Morgan City, LA

Head of Facilities Department Petty Officer First Class (E-6)
* Recently activated for 6 months, working as the Head of Facilities Department, which monitors and audit Bulk Cargo Transfer Facilities per 33CFR154, 126, & 127.
* Currently qualified to perform United States Port State Control Safety Inspection on foreign oil tankers to ensure compliance with U.S. Regulations and International Regulations – to include ISM, SOLAS, and MARPOL.
* Qualified to approve and monitor Explosive Loadouts.
* Earned Marine Safety Insignia designation.
* Worked in the Marine Investigations Division, which monitors Marine related Personal Injuries, Vessel Accidents, and Drug and Alcohol cases. Audited Marine related companies to ensure compliance with USCG and Department of Transportation Drug Testing Requirements.
* Will be applying to become an officer in the USCG in 2003.

1990-1998 United States Army & Louisiana National Guard

* Performed three years active duty and five years in the Louisiana National Guard.
* Completed to rank of Sergeant (E-6).
* Worked in squad size elements performing Infantry tactics, received Honorable Discharge.

AWARDS

* Certificate of Accomplishment form Wausau Insurance – For helping Hunting Oilfield Services, Houma Manufacturing Facility reach one year with no Lost Time Accidents.
* Army Commendation Medal - One
* Army Achievement Medal - Two
* Army Certificate of Achievement – Two
* Danos & Curole Owner Discretionary Award

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6201 to 6250 of 10806)

Go to Search Parameters...

Brief Description

Autocad drafter designer

I am a fully qualified derrickman and have been working offshore for the past 9 years.

I have learned Software : Pipesim 2000, Caesar II, Microsoft Office, Power Point, Autocad 2D

I worked as mud engineer for 2 years in Indonesia and now I am solid control engineer and I am running a job for Drilling Project in Libya

33+ years in the oil and gas service industry. His portfolio includes (but is not limited to) field operations and supervision, sales, marketing, business development, and management.

Have been welding for over 10 years the lat 4 have been in the oil field and now i want to get into the pipe welding but will the oil field for as long as i can

B-Tech in Chemical Engineering.

Planning Engineer, Certificate of degree Dr. of Philosophy

Professional graduate engineer experienced in Facilities Management, CMMS implementation and application, Technical Writing. Recent 16 months in Kazakhstan. Interested in contract work (rotational or short-term)

I am a Mechanical Engineer with around 9 years of experince, with knowledge in construction project manage. Desing of wellhead equipment, and drilling equipment, certified in none destructive examination.

Familier with oil refining process an simulations:HYSYS,Flare net - Familiar with CDU (Crude Distilation Unit) /VDU (Vacume Distilation Unit) /HCU (Hydro Craker unit) /NHT,Unifiner,CCR /LPG /VBU (Visbreaker Unit) /AMINE /SWS (Sure Water Stripper Unit) /SRU (Sulphur recovery unit)

Wireline senior field engineer

I did Diploma in 1999, Graduation in 2002 in Mechanical Engineering & Post Graduations in Energy System. I am very much interested in the energy efficiency. Presently i am working in the THERMAX India Ltd, as a Sr. Executive - Proposals. My job profile is Process design of API type Fired Heaters.

Instrument Tech / Electrical Officer (ETO) / Electronics officer

Extensive experience in piping layout, stress analysis & Support gad, Isometrics & BOM, procurement assistance, site engineering survey & site assistance during Project execution and project management.

Qualification-Diploma in Mechanical Engineer

Reservoir Geology, Calculations of Hydrocarbons in Place & Analyzing All Parameters Which Affect the Results and their uncertainties, Reservoir Mapping(structural, petrophysical & facies) to make up the Geological Model, Dipmeter Processing & Interpretation Using Incline Software, Fault sealing an

Drilling Engineer & Manager (on & offshore with deep water) some completions

ROTATING EQUIPMENT ENGINEER OBJECTIVE: Successful career in oil & gas industry as Rotating Equipment Engineer

International experience in both drilling and production

Overall 8 years working experience in Document Control / Technical Clerk / IT Assistant / Planning Assistant. Very good knowledge in Computer networking, operating system, office software, specific software, software development, etc.

PROCUREMENT ENGR

Position Manager Instrumentation & Controls Summary of Experience: Specialist in Instrumentation and Process Control Systems Engineering & Commissioning with over thirty three years experience of grass roots Lump Sum Turnkey projects worldwide.

•Seismic data acquisition and processing •Punctual, motivated, achievement oriented, highly organised and competent individual •Team player, able to work under pressure and to meet deadlines

OBJECTIVE Focusing on Project/Interface Engineering positions in the energy sector encompassing deepwater production/operations, project development, commercial and technology development.

Experienced electrical and mechanical pipeline tech.

Plant inspection, QA/QC, Welding inspection, condition monitoring

Innovative Petroleum Engineer, who is a proven performer achieving great results in the past assignments. Excellent ability to work with multifunctional teams and experience in international locations. Eager learner. Masters degrees in both Computer Science and Petroleum Engineering.

Piping Design And Pipe Stress Engineer with 9 years of experience working with Worlds Largest Grass Root Refinery of Reliance Industries Limited at Jamnagar, Gujarat , INDIA.

Assets/inventory co-ordinator

Professional experience - Problem solving and design modifications in accordance with the engineering standards. - Project execution, upkeep of records/manuals, scheduling jobs, spares/material/manpower management etc. - -

I have total 9 years experience as production/process operator in the petrochemical industries.

Sales and Operations Officer targeting Productivity and Organizational Development

Civil Engineering and Petroleum Engineering degree with various skills in Microsoft Excel Macro, HYSYS system and minimum drafting capability.

Worked oil rigs overseas, including Yemen,Venezuela, Ecuador, Cuba and Russia. Did oil rig servicing in Alberta. I am presently working and would like to take an overseas position.

I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.

I'm petroleum engineer,graduated in 1995 from suez canal university , work in egypt in suez oil company as petroleum engineer.

15 years experience of mechanical training in the middle east. This includes classroom, workshop, OJT, course design and writing and training course administration.

OVERVIEW OF RESUME WITH Experience spanning over nine years, I have worked as HSE inspector, HSE engineer and HSE coordinator on major oil & gas projects within the oil industry .

Production Engineer with strong IT skills and over 6 years experience in oil and gas production engineering and operations, with expertise in surface operations, plant start up, well services, planning, training, HSE coordination and community liaison.

Chemical engineer with process experience wanting to enter into the oil and gas industry.

IT manager with over 15 years experience in the design, development and implementation of information systems within the Oil industry. Energetic, creative team player who consistently exceeds expectations.

I am organized and detail-oriented, work well under pressure and deadlines, enjoy working with a variety of people. I also have a great attitude and enjoy working in a creative, challenging and growth-oriented working environment.

Dear sir Service engineer in Yemen. I have good knowledge about electrical systems and I have 6 years experience in Electrical power plants field, I hope I can perform best of my knowledge if I get opportunity in your esteemed organisation.

experienced professional in corrosion seeking job opportunities world wide.

Worked on a variety of projects as a process engineer in Europe, Australia and the Middle East. Assumed roles of project engineer, lead process engineer and process technical focal point for operations during career. Use of the process simulations Hysis, Hysim, Proii and PIPESIM.

15 years of experience in QA/QC, Welding Inspection, Piping systems, Pipelines, NDT & Plant Inspection with a valid certificates of CSWIP Plant Inspector, CSWIP 3.2, AWS CWI, ASNT Level II in RT, UT & MT. Computer literate with UAE Driving Licence.

15 Years of HSE experience in oil & gas field.

British MSci petroleum geology 1998-2002

I have fifteen(15) years of experience in the oil industry as floor hand and lately as warehouseman, I have worked in offshore operations and inland operations.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 [ 125 ] 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out