Resume - 15 years of experience in QA/QC, Welding Inspection, Piping systems, Pipelines, ...

Misco Jobs

Resume #3996

CONTACT INFORMATION:
View contact information...

EXPERIENCE: INDIAN: 10 years OVERSEAS: 5 years TOTAL: 15 years

EDUCATION:

 Diploma in Mechanical Engineering passed in 1988 from Tamilnadu Polytechnic, Madurai, State Board of Technical Education & Training, Tamilnadu State, India.

 CSWIP Plant Inspector - I, ÑSWIP 3.2, Senior Welding Inspector, CSWIP 3.1.

 American Welding Society - Certified Welding Inspector AWS-CWI # 010 11 481

 ASNT Level II in Radiographic Testing, Ultrasonic Testing & Magnetic Particle Testing.

 Conversant with Computer Packages AutoCad2000, Microsoft Office.

OTHERS:

 Valid UAE Driving License # 686946 (Expires on 30th May 2013).

EMPLOYMENT HISTORY:

 A. September 2002 to till present: Overseas AST Co. L.L.C,
P.O. BOX # 350, Dubai, UAE.
Designation: QA/QC Engineer
PROJECT:-
 Dubai International Airport Expansion (Phase II): - Jet Fuel Pipe Lines
 Client: Dubai Civil Aviation
 Consultant: Dar Al Handasah
 Jumeirah Islands - Chilled Water Piping Distribution Network (47 Kilometers)
 Client: Jebel Ali Properties/Gulf District Cooling
 Third Party Inspection: Bureau Veritas
 HOT TAPPING: SHELL, GASCO

DUTIES & RESPONSIBILITIES
 To supervise QC Inspector's for Inspection of Pipes, Fittings, Consumables, Weld Joints, Fit-up's, Pipeline Alignment, Leak Detection System, Heat Shrink Sleeves & Coatings.
 To liaison with Third Party Surveyor for conducting Welding Procedure Qualification, Pipeline Inspection, Radiographic Film Interpretation, Field Insulated coated joints and corresponding reports.
 To Prepare ITP for assigned projects
 To write new Welding Procedure Specification for the project handled, includes HOT TAP Procedures
 To conduct / perform Weld Procedure/Performance Qualifications Tests, witness Destructive Testing, Prepare PQR, WPQR and approvals from TPI etc.
 To Coordinate and control inspectors and Third Party inspection services
 To Advise project managers on Project Quality and error prevention
 To Analyze project production activity with regard to quality and quality defects
 To Execute all inspections and recording the results
 To make Final acceptance and handover to client quality related documentation
 To prepare Quality Control formats as required by the Client Specification.
 To prepare Inspection Reports as required for ISO9000:2000.
 To witness blasting, dft check's & adhesion test's at sub-contractors yard for Coating and Lining.

B. September 2001 to August 2002: Doosan Heavy Industries & Cons. Co. Ltd.
[HANJUNG], South Korea.
Designation: QA/QC Engineer (Mechanical)
PROJECT: -
 Umm Al Nar De-salination Station "B" – Abu Dhabi
 CLIENT: - Abu Dhabi Water and Electricity Authority (ADWEA)
 CONSULTANT: - Mott MacDonald
DUTIES & RESPONSIBILITIES
 To inspect & co-ordinate with Client's Mechanical Engineers for Piping System inspection, Storage Tanks Inspection, Pressure Test's, NDE & Welding Inspection.
 To inspect GRP Piping Systems, Rubber Lining Inspection, S.S Cladding's as per requirements
 To inspect & liaison Static Equipment Inspection & Alignment, Steel Structural, Painting and Hot Iinsulation / Lagging Inspection for Equipments like 325 Tons Boilers, 84 Meters x 24 Meters x 16 Meters Height Distillation Units – 5 nos etc., as per International Codes, Standards & Specifications.
 To co-ordinate & witness Out of Roundness, Plumbness, Vacuum Tests, Penetrating Oil Tests, Settlement Tests, Blasting, DFT Checks, Dolly Pull off Tests, Painting / Coating Materials verification, Method of application etc. for Steel Storage Tanks 78 M Dia. X 16.5 M ht. – 4 nos
 To perform Installation, Alignment, commissioning inspection of Rotating Equipment like Sea Water Intake Pumps 3 Mega Watts – 6 nos., Brine Recirculation Pumps 2.5 Mega Watts -5 Nos., Cooling Water Recirculation Pumps 2 Mega Watts – 5 Nos., Distillate Pumps 0.8 Mega Watts – 5 Nos., Condensate Discharge Pumps, Boiler F.D. Fan's, Town Water Supply Pumps – 9 Nos.
 To liaison with sub-contractor's QC personnel for preparation of Inspection Schedule, Review RT Films, and to witness the required inspection.
 To prepare Inspection Reports, review Test Packages etc.
 To witness Proof Test's for Overhead Cranes, monorails etc.
 To make Final acceptance and handover to client quality related documentation

 C. January 1998 to October 2000: A.H. Shuwayer Co.,
Kingdom of Saudi Arabia.
Designation: QA/QC Engineer

PROJECTS: -
 Shedgum Gas Plant Debottle-necking Project, Shedgum for Saudi Arabian Oil Company (ARAMCO) through Pritchard Al-Bassam Limited (PABL), KSA.
 Up-grade Firewater & Drainage System, Abqaiq for Saudi Arabian Oil Company (ARAMCO), KSA.

DUTIES & RESPONSIBILITIES

 To review the Test Packages, developing Welding/Testing Procedures, Co-ordinate with Client Inspectors, Preparation / verification of punch-lists, review / interpret NDT techniques, witness and monitor the Hydro testing, Pneumatic testing and In-service Leak Test of Piping system as per International Codes, Standards & Specifications.
 To liaison with third party inspection and testing agency for welding procedure and performance qualification test, calibration of inspection and measuring instruments, welding machines etc.
 To Co-ordinate with NDT contractor to carry out RT, UT, MT & PT as per required Project Specifications and update the NDT result on relevant Isometric Drawings to witness, review and attest the NDT report.
 To Co-ordinate with the welding foreman and site engineers for marking the weld repair area on welding joint after reviewing the RT reports and expediting the weld repair for final clearance of pipe lines.
 Inspection of Piping spools & Structural item fabrication in compliance to Isometric Drawing. Inspection is to be carried out at layout/ marking stage, fit-up stage, during & after welding as per Welding Procedure Specification, for the consumable used for welding and final dimensional & visual inspection prior to release of pipe spools & structures for painting.
 To implement and monitor the quality program.
 To perform Internal Audits in QA/QC and to co-ordinate during Quality Auditing by external agencies.
 To prepare ITP as per the requirements of company policy.
 To up-date and maintain as per ISO 9002 - daily weld inspection reports, layouts, fit-ups, welding, dimensional and visual inspection reports, request for NDT contractor, weld inspection summary sheets, material traceability report, material inspection reports, hydro test package as per P &ID and Isometric Drawings.
 Inspection of Material received from our client & local purchased materials viz. Pipe, Fittings, Structural items etc. in compliance to the Standard Specifications and to review the Material Test Certificate.
 To check the Bill of Quantity of Isometric Drawings and reconciliation of material utilization for the project.
 Did work in Claims Task Force for preparing Spread Sheets of Radiography Test's.
 To co-ordinate for Shut Down Maintenance of Pipe lines during TIE-IN and HOT TAPPING operations

D. April 1993 to January 1998: Varuni Biomass Energy Products
(P) Ltd., Dindugal, INDIA
. Designation: Asst. Engineer (Mech.)
PROJECTS:
 Sulfuric Acid Plant
 Linear Alkaline Benzene Sulphonic Acid Plant
 Acid Slurry Plant
 Sodium Silicate Plant
DUTIES & RESPONSIBILITIES

 Reporting day-to-day activities to the Works Manager and planning for the next day project activities.
 Monitoring and over-all supervision of fabrication & erection through out the whole project.
 To Co-ordinate with Boiler Inspectors for Hydro Testing Waste Heat Recovery Boiler, Economizer and inter connected pipelines, which is under Indian Boiler Regulations.
 Inspection for Materials & Equipment's received from other state & local purchased items viz., Pumps, Heat Exchangers, Twin Lobe Compressor, Valves, Pipe, Fittings, Structural items etc., in compliance to the Standard Specifications and to review the mill test certificate.
 Supervision and Inspection of Piping spools & Structural item fabrication in compliance to Isometric Drawing.
 To coordinate with NDT contractor to carry out RT, UT, MT & PT as per required project specifications.
 To co-ordinate with the welding foreman for marking the weld repair area on welding joint after reviewing the RT reports.
 To up-date and maintain as per project specification Inspection reports, hydro test package as per P &ID and Isometric Drawings.
 Preparation of Bill of Materials and Material Requests for Mechanical items.
 To Co-ordinate with local machine shop for the parts and spares required for plant.
 To check the Bill of Quantity of Isometric Drawings and reconciliation of material utilization for the project.

E. November 1988 to April 1993: Sri Devi Engineering Works,
Madurai, Tamil Nadu.
Designation: Supervisor

DUTIES & RESPONSIBILITIES

PURCHASE DEPARTMENT
 Procurement of raw materials & bought out items as per company's Purchase Order's which include Tempering & Heat Treatable Steels for Automobile Mould's & Dies / Rubber Molding machinery's.
 Co-ordination for various types of Heat Treatment Processes like annealing, quenching & tempering, case hardening, normalizing, nitriding along with relevant documents.
PRODUCTION DEPARTMENT
 Day to day allocation of jobs to different types of conventional machinery's viz., lathes / planning / shaping / radial drilling / milling / welding generators / surface grinders etc.
 Co-ordination with foreman's for daily production activities and discussing regarding the same with Production Engineer.
 Preparation of daily production reports, job history cards, and material requisition reports, etc.
 Co-ordination with QC Personnel.
 Assisting in negotiation of completed Bid's with Manager.
QUALITY CONTROL DEPARTMENT
In charge for ensuring quality of the following items:
 Rubber Molding Hydraulic Press ranges from 30 ton to 300 tons.
 Tire Pre-tread Curing Presses.
 Jigs & Fixtures for Auto Rubber components.
 Automobile Tire & Tube Manufacturing / Testing Machinery's.
 Dies & Moulds for 'V ' / Fan Belts.
 Did inspection for the above said items at layout / fit-up / during / after welding and final inspection as per client's needs / requirements / standards.
 Familiar with the use of inspection instruments like micrometers, vernier calipers, dial gauges, height gauges, feeler gauges, radius gauges, depth gauges, screw pitch gauges etc.

PERSONAL DATA

DATE OF BIRTH: 25 July 1969
NATIONALITY: Indian
MARITAL STATUS: Married
LANGUAGE KNOWN: English, Hindi and Tamil
UAE VISA STATUS: EMPLOYMENT

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6301 to 6350 of 10917)

Go to Search Parameters...

Brief Description

I am organized and detail-oriented, work well under pressure and deadlines, enjoy working with a variety of people. I also have a great attitude and enjoy working in a creative, challenging and growth-oriented working environment.

Dear sir Service engineer in Yemen. I have good knowledge about electrical systems and I have 6 years experience in Electrical power plants field, I hope I can perform best of my knowledge if I get opportunity in your esteemed organisation.

experienced professional in corrosion seeking job opportunities world wide.

Worked on a variety of projects as a process engineer in Europe, Australia and the Middle East. Assumed roles of project engineer, lead process engineer and process technical focal point for operations during career. Use of the process simulations Hysis, Hysim, Proii and PIPESIM.

15 years of experience in QA/QC, Welding Inspection, Piping systems, Pipelines, NDT & Plant Inspection with a valid certificates of CSWIP Plant Inspector, CSWIP 3.2, AWS CWI, ASNT Level II in RT, UT & MT. Computer literate with UAE Driving Licence.

15 Years of HSE experience in oil & gas field.

British MSci petroleum geology 1998-2002

I have fifteen(15) years of experience in the oil industry as floor hand and lately as warehouseman, I have worked in offshore operations and inland operations.

I have 15 years experience in metrology & instrumentation in calibration laboratory, pharmaceutical company & petroleum company.

BRIEF OVERVIEW •Accomplished Mechanical Engineer Involved in designing, engineering, execution, quality control, construction and implementation of ISO-9001 processes in the field of refineries, petrochemicals, chemicals, material handling and offshore projects for over 9 Years.

Summary of Experience: Eight Years in total on the following activities. Welding, painting and Lifting Inspection.

First Line Supervisor (driller), Compliance Officer (certified construction officer), 5 years Post Secondary Education including Business & Finance Diploma

Experience welder and heavy equipment mechanic

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

Geophysicist

Contract design, award and management, procurement plans, purchasing, invoice payments and cost control, contract administration

I have bachelors in mechanical Engineering and Masters in Petroleum Engineering.I have working Experience in Pipe line and EPC Companies

Well Service Supervisor or Coil Tubing Supervisor

Miantenance Engines and pumps - Computers skills

I have Diploma in Instrumentation & Control. I working in same field last 8years I have all certificate which fulfill your all requirements. To work with a progressive, professionally managed organization in competitive and rewarding environment. I have equipped myself conceptually and practically

Degree from "College for chemical technologies".

Safety Engineer with Refinery Experience 6 yrs

Solid organizing and planning skills

B.E telecom engineer.

Excellent Communicator • Bilingual - Spanish • Procurement/Logistics

I have 2 years’ experience within the Upstream oil and gas industry. This has afforded me the opportunity to develop a good knowledge and understanding, of a Production background. I have recently gained a NVQ level 3 in Process operations and would like the opportunity to enhance my experience.

Experienced Terminal Operator and Supervisor in the Petrochemical field with an excellent safety record and multiple Oil Industry related skills. Very Health and Safety orientated with a high regard for HSE Regulations and a NEBOSH Qualification in Occupational Health and Safety

I like work.

I know how to organize my activity

Awarded 'Best supply chain personnel' from the Minister of Electricity. Reduced inventory value and lead time by identifying cost saving /part standardization initiatives, purchase avoidance, centralized purchase and standard localized supply .

I AM HIGHLY MOTIVATED & ADAPTABLE MATERIALS/ LOGISTICS SPECIALIST: with over 20 years professional operations experience in all aspects of Materials & Logistics, Exports/Imports administration, MMaterials Co-ordination Expediting, Inspection, Inventory Control, Warehousing, & Supply Chain Managemen

Contracts Manager; Procurement Manager; Subcontracts Administrator; Contract Administrator; EPC oil & gas downstream construction.

A proven Welder highly skilled in the areas of aluminum, ferrous and non-ferrous (CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.

Monitoring production and running diagnostics on well performance, maintaining flow lines, scheduling and supervising wireline/swabbing programs, optimizing plunger lift systems, monitor pressure and flow readings, identify any safety or environmental issues.

Experienced Assistant Driller with 5 + years drilling in Wyoming for Nabors Drilling.

Estimation and Costing,variationsnad claims,Monthly Progressive Bill preparations

I have been a Mechanic now for 5 years and worked offshore as a rig mechanic for 2 years.

DOCUMENT CONTROLLER

fit pipe fallowing by blue prints and weld pipe whith tig,mig,stick and flux core

Senior Electronics Technician

3+ years of experience in Electrical Design of Commercial and Process Industries with fair knowledge of ETAP.

A Certified Human Resources Professional with practical and progressive experiencein Africa, Central America, Canada, USA, Central Asia and the Asia-Pacific region.

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

Documents Control, Project Documents Control, Administration Assitant, Secretary

i can analys the hazard working conditon by using Job Safety Analysis, Risk Assessment and Hazard identification, implementing the safety policy in a good bahavioral way that people can follow the safety rules, im a good trainer in safety firefigthing, first aid, handling ang lifting procedure

I am a degree qualified Instrumentation and Control engineer / technician. I am looking for contract work in the oil and gas industry and I have offshore experience. I have full medical and am OPITO BOSIET certified. I am willing to relocate worldwide and will consider any shift rotation.

To obtain an exciting and challenging career as a Geological Engineering Technologist in the Oil and Gas Industry so that my past experiences and training can grow.

International Field Experience (USA, Aberdeen UK, Dubai, Brunei) with Baker Atlas as a Wireline Logging Engineer, Masters Degree in Petroleum Engineering, B.Sc Undergraduate degree. Currently in Perth, Australia and willing to relocate OR work on rotational basis

5 years of full-time experience in Refinery, Chemicals. An Engineer with MBA.

Diploma In Mechanical Engg. with 6 Yrs exp in Piping Designer

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 [ 127 ] 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out