Resume - A result oriented professional with over thirty broad-based years of internation...

Misco Jobs

Resume #4002

CONTACT INFORMATION:
View contact information...

OBJECTIVE

International Drilling and Workover Supervisor

PROFESSIONAL EXPERIENCE

Saudi Aramco 1996 - Present

Senior Liaisonman / Foreman Drilling and Workover / Dhahran, Saudi Arabia
Married on resident status in the Kingdom of Saudi Arabia. Providing wellsite supervision on Directional / Horizontal / Multi Lateral, drilling, workover and completion operations, on land / offshore with company and contractor owned drilling rigs.. Responsibilities encompass the well site planning, drilling program verification for accuracy, locating equipment and the implementation of the scope of work with minimum supervision or assistance from third party service representatives.

Developed and implemented a pre and post contractual acceptance program for drilling contractors offshore and land rigs

Developed the contractual equipment requirements for the current offshore drilling programs and the fast track extended reach drilling programs for high density population area's, onshore

Served as a committee member that was responsible for developing the Emergency Response Procedures for the Saudi Aramco Offshore Oil Fields, Standards and Training Requirements for Saudi Nationals. I am currently developing a new Standards and Safety Requirements for Offshore Drilling and Workover Units.

Santa Fe International Services.

Senior Drilling Foreman / Saudi Arabia /Qatar Offshore 1993 to 1996
Contractually prepared and moved from Egypt a offshore jackup for 2 year contract for Saudi Aramco. Drilled and completed horizontal development wells in various fields offshore Saudi Arabia. Moved rig to Qatar for 1-year contract for Oxy. Supervised various major rig upgrades for the contract prior to commencement for Oxy. Drilled extended reach horizontals into the Arabs, many being multi-lateral.

Senior Drilling Foreman / Post War Kuwait 1991 to 1993
Participated in the post Gulf War reconstruction of Kuwait's Raudhatian, Sabriyah, Minagish, Magwa, Ahmadi, Burgan and Umm Gudair oilfields. Drilled and worked over oil / gas wells damaged in the Gulf War without assistance from third party service contractors. Drilled and completed Kuwait's first directional dual completion.

Developed a rig moving technique that reduced the in field rig move time from 36 hrs. to 6 hours.

Implemented time saving operations the reduced the average workover of nine days per well down to five with significant impact on rental tool costs.

Parker International Drilling Co. 1987 to 1991

Drilling Superintendent / Miramar / Chad / Niger
Exploratory drilling in Chad for Esso Exploration. Provided the client with road and location construction, one drilling and one workover rig in remote desert to sub-tropical locations. Supervised the construction of the roads, locations, camp areas and the daily operations of both rigs and catering for all the camps. The drilling rig was farmed out to Elf for two wells in the deep desert of Niger. Organized both rig moves through three of the neighboring countries without loss of equipment and or projected time. Operated completely without supervision on a two well program for Elf and provided total services to the client through a two-man office in Niger.
Final project was the rig up of the largest helicopter rig in the world for the first well for Amoco in northern Miramar.

Developed a rig move procedure that reduced rig move time by 30%

Helmrich & Payne International Drilling Co. 1985 to 1987

Senior Toolpusher / Venezuela
Drilled 18,000 + oil wells in the Anco, Maturin area of eastern Venezuela. The wells consisted of high-density shale's inter bedded with high porosity sands that contributed to sever differential sticking problems. Spanish was the only language spoken for communication with the rig and operator personnel.

Santa Fe International Services 1981 to 1985

Senior Drilling Foreman / Offshore Indonesia
Operations included directional dual completion oilwells in the Arjuna field for ARCO. These wells normally were completed within ten days. We reduced this time from spud to release in seven days with oil in the tubing. Used techniques like pumping cement through the drilling assembly to combat massive lost circulation above the gas cap. Resided in Singapore.

Global Marine Drilling Co. 1973 to 1981

Driller / Columbia / Panama / Nicaragua / Gulf of Mexico / California / Canada
Started working as a derrickman aboard drill ships and progressed to the driller's position. The drill ships were all exploration drilling some of it being HPHT. Worked in various shipyards as rig up crew and was stationed in Canada to assist in the building of the jackup fleet that they now operate worldwide.

Field Drilling Company 1972 to 1973

Derrickman – Roughneck – Motorman / West and East Texas
Started in the oilfield working on rigs drilling deep gas wells.

Military Sea Transport Service (MSTS) 1969 to 1972

Ordinary Seaman / Saudi Arabia / Philippians / Vietnam
Performed seaman duties aboard tankers transporting JP4 and JP5 to various military bases during my summers in high school.

EDUCATION

High School – Singapore American School – Graduated 1972
Ventura City College – Petroleum Technology, 1978
College of the Sequoia – Basic Computer Programming, 1980

OIL INDUSTRY TRAINING

University of Texas / Austin Texas 1977
Petroleum Extension Course, Units I-X

Exxon Research and Development 1978
Abnormal Pressure Control School

Murchinson Drilling School 1991
Optimized Drilling and Well Control

University of Southeast Louisiana 1993
Advanced Rig Stability School
Sea Survival School
Firefighting School

Well Control Schools 1975 - 2002
Oklahoma University
Louisiana State University
Ventura City College
Current – Randy Smith, IADC

Saudi Aramco 2001 - 2002
Drilling Engineering School
Root Cause Analysis School

PROFESSIONAL LICENSES

Certified Instructor and Commercial Diver, NAUI 1973
USCG Able Bodied Seaman-Lifeboatman, Class – Unlimited 1981

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 10917)

Go to Search Parameters...

Brief Description

QA Manager with 23+ years diverse experience

All STCW certificates are valid and available

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Application For Mechanical Inspector/Engineer

Having 14 plus years experience in EPC projects in the area of Construction, Process and Equipments, Installation, Commissioning, Preliminary & Detail engineering & Project Management system, in Oil & Gas, Petrochemical, Chemicals sectors, etc.

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Science bachelor degree & safety management diploma and HSE Supervisor Technician with 13 years of experience, Worked for drilling operation, Production operation on offshore and onshore as a HSE technician, advisor and supervisor. Drilling experience as well as driller hand ,Experience managing

A competent & self motivated professional with the ability to work independently and as part of a team within a highly pressured, fast moving environment with 10 years of qualitative and enriching experience in the field of Logistics, Supply Chain, Freight Forwarding, & Operations

An astute, detail-oriented professional who excels under the pressure of time constraints and possesses the determination to always exceed expectations.   Summary of selected Accomplishments responsible for career total of more than 500 placements!

Rock physics, Petrophysics, Quantitative seismic Interpretation, AVO, reservoir modeling, generation of synthetic seismograms

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

Seeking employment as Telecom Engineer in a competitive environment for a position offering challenge, diversity and opportunity for professional advancement, having strong learning aptitude along with analytical and interpersonal skills.

OBJECTIVE: To obtain contract or full time position as a Document Control or Records Administrator and/or other related job.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Chief engineer, marine with 14 yrs. of sailing exp.hands on exp. in maintenance of diesel engines,power plants,air conditioining,pumps and turbines.etc.

I am a consultant working for Devon Energy in the Ft. Worth area and have worked for several major oil companies doing directional wells and taking them from start to finish, building locations and put them on production.

Over 30 years as supervisor.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Well Test Engineer HP/HT

Industrial Electrician

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

Pipefitter Welder/Maintenance Supervisor 20+ years of experience in this field of work. I have had firefighting training as well as inspection training.

I have been in the oil & gas industry for 34 years in working in differenece fields.

I am capable, professional and organized. 19 years service in the engine room on ocean going vessels, including 14 years sailing as Chief Engineer has afforded me the experience and tools to excell in this position.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

A result oriented professional with over thirty broad-based years of international experience in the drilling and workover industry. Major strengths in team building, planning, contractual verification, rig design and operational supervision.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

CFO & Treasurer - publicly traded oil & gas & mining company

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

An innovative and seasoned Marketing professional with expertise in consultative sales and marketing, strategic planning, brand management, market research, sourcing, procurement, supply chain and logistics, and with 20 years of successful progressive experience in all phases of market consulting.

Project management. Construction management.

Dear Sir, I have 21 yrs Exp in a petroleum laboratory as a Sr lab Chemist having knowledge of testing all petroleum products, petrochemicals based on ASTM/IP/BIS methods, handling auto instruments aware about fire and safety rules and regulations.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Application for the Post of " Oil Rig Doctor " (Medical Officer/ Doctor/ Occupational Health Consultant / QHSE Rep./ Medical Advisor). (With On & Off Rotation Duty Cycle). (Offshore &/or Onshore).

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out