Resume - I am a Senior Process Engineer with 27 years of operation and process design exp...

Misco Jobs

Resume #40235

CONTACT INFORMATION:
View contact information...

OBJECTIVE: A process engineer with over 27 years of operational and design experience in the oil and gas industry seeking a position in Process Engineering offering growth potential.

EDUCATION: University of California, Los Angles.
M.S. in Chemical Engineering - December 1976.
Grade point Average - 3.5 / 4.0
B.S. in Chemical Engineering - June 1975.
Grade Point Average - 3.6 / 4.0

HONORS & AWARDS:
B.S. Degree awarded with distinction (Magna cum laude). Awarded the prize of "Outstanding Student in Chemical Engineering" by the American Society of Chemical Engineers in April, 1975. Regents Fellowship at UCLA for two successive years (1975-1976). Member of the National Engineering Honor Society (Tau Beta Pi). Dean's list three years.

EXPERIENCE: Saudi Aramco (April 1982 till December 2005)
Yanbu NGL Plant: October 1988 till December 2005.
Shedgum Gas Plant: August 1986 - September 1988.
Ras Tanura Refinery: April 1982- July 1986.

Worked as a senior Process/Operations Engineer for Yanbu NGL Plant, which includes fractionation columns, treating modules, refrigeration and tank vapor recovery units. Duties included providing technical service to the operating personnel, engineering analysis and the development of recommendations and alternatives in the solution of operating and process problems in the NGL Plant. Duties also included process design for long term projects and the preparation of design packages for in-plant modifications. Responsibility also included conducting feasibility and long range studies to optimize the plant operation and performance. I also conducted computer simulations of the plant process units to identify bottlenecks and enhance units performance. One of my major duties was also to train and develop the younger engineers.

The major projects I was involved in during my work in the NGL Plant included: the addition of a new deisopentanizer to recover isopentane for gasoline blending; modification of the propane tanks vapor recovery system to reroute the tanks vapor to the propane refrigeration unit under certain operating conditions and consequently shut off the compressor dedicated for vapor recovery; installation of a new deethanizer column with super capacity trays to upgrade the NGL Plant throughput; inplant modification to allow the separation of refrigerated from non refrigerated propane so that the ethane content of the non refrigerated propane can be increased; installation of an injection system to add propane to butane and benefit from the price differential between propane and butane; upgrade of the propane and butane Merox systems by enlarging the holes of the sieve trays of the extractor columns; design of a steam blanketing system for a condensate drum to control its pressure.

Prior to working for Yanbu NGL Plant, I was assigned to Shedgum Gas Plant, where I worked as an operation/process engineer for about two years. The gas plant includes DGA treating units, liquid recovery modules and a Claus unit, in addition to NGL fractionation columns. Main duties also included providing technical support to operating personnel and working on long term projects to enhance the plant operation. One of the major projects I worked on during that period was the debottlenecking of a condensate H2S stripper, by correlating field data and computer simulations. Also worked on designing a hydrocarbon liquid recovery system for a gas slugcatcher.

My first assignment with Saudi Aramco was at the Ras Tanura Refinery, where I also worked as an operations/process engineer for more than four years. Duties included providing technical service to the operating personnel in the resolution of day to day problems, optimizing the plant operation and conducting feasibility studies to enhance the plant operation and performance. Responsibilities also included process design for long term projects and the preparation of design packages for plant modifications. Specifically, I was assigned to the following areas within the refinery:

Crude Topping Unit – Crude Stabilization Unit – Distillate Desulfurization Unit - Residue Re-run Unit – Distillate Treatment Unit - NGL Fractionation and Treatment Unit - LPG Compression and Deethanization Unit

Procon Inc. (Subsidiary of UOP) (October 1978 to January 1981)

Worked as a process and project engineer for Procon, Inc. in Los Angeles, California. Duties primarily included the process and equipment design for different refinery and petrochemical facilities. This involved developing process flow and piping diagrams, equipment specifications and ratings, heat and material balances and interfacing a complete design package.

C.F. Braun & Co. (December 1977 to October 1978)

Worked as a process engineer for C.F. Braun in Los Angeles, California. Duties included the process and equipment design for different refinery and petrochemical facilities. This involved developing process flow and piping diagrams, equipment specifications and ratings, heat and material balances. My main assignment included the process design of a Hydrogen Plant and a Gas Processing Unit for Petro-Canada in Alberta, Canada.

INTEREST AND ACTIVITIES: Reading and Jogging.

REFERENCES: Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 10917)

Go to Search Parameters...

Brief Description

Experience in Pre-commissioning, Commissioning, Startup,Operation and Trouble shooting.Acquaintance in Panel operation. Experience in operating Distillation Columns; Experience in Water Treatment/Waste Water Treatment; Driving HSE performance; Knowledge in Computers and Operating System. Acquainta

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Proect control enginner cost control and senior planner for EPC projects

Having 15 years of experience as as Design Draughtsman / Autocad Engineer in Oil & Gas, Petrochemical & Manufacturing industries.

QA/QC Manager Welding Engineer Offshore and Onshore

Drilling Excelence Manager for BP Trinidad & Tobago. 10 Years experience in BP as DE/SDE/Org. Capability Manager & Drilling Excellence Manager. 9 Years in Service Company with experience as De/project Manager/Proposal Manager & QHSE Manager.

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

Piping stress analysis, finite element analysis using ANSYS, Mechanical design, etc.

Experienced Country Manager, skilled in change and open to multicultural environment.

Design skills in steel and concrete of petro chem and power plants.

Production Engineer resume

I working for Schlumberger Achievement as Crew Chief Wireline Operator. I perform jobs in location. Working in a Team is one of my compliances, most jobs in Cased Hole and Open Hole, and report to Field Engineer

Coatings & Corrosion Engineer "NACE"

I am 44years old and right now I am still working at PT Pec-Tech Indonesia (RGMI Group), current position as “Senior Process Engineer”. Business line of this company is Engineering/EPC As you can see from my enclosed curriculum vitae; I have long and wide experiences (± 19 years) in Operation Pro

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

Upstream and mid-stream experience(27 years) plus underground waste water injection

earned master of science at the University of Oklahoma in the subject of rock mechanics. He has been a professor of production, drilling, completion and stimulation for more than 14 years, and he had earned more than 12 years of field experience.

Ph. D. level Materials Scientist looking for a position in research and development of new materials and novel processes for fuel cell, or hydrogen related industry to apply my broad materials working knowledge, materials characterization expertise, equipment design, and patents development skills.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have a PhD in Logistics Management and over 20 years work experience in shipping, logistics, supply chain management, airfreight, sea freight, container marketing & operations, port development & expansion, ship and air chartering, project cargo handling, freight forwarding, etc.

Skilled, knowledgeable, and experienced in organizational assessment, strategic planning, business process reengineering, organization design, and change management in oil and gas related operations including production SBU's, upstream and downstream R&D, MIS, and Finance

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

A Procurement/Logistics/Admin Manager of 25 years experience in the O & G industry particularly with FPSO's. Has contracted in Thailand/Singapore/Malaysia/Nigeria/Libya/UAE/Qatar/Scandinavia/Europe.

 Over 21 years of experience in the Petroleum exploration Industry.  Have broad experience in the area of drilling and completion fluid design and formulation in on shore as well as off shore wells.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

A versatile and Innovative Chartered Accountant of Nine Years post Qualification experience and Eighteen years on the Job Practical Experience

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Over 12 years (over 4 Years in Gulf Countries) in pre-commissioning and commissioning, start up, daily plant operation and shutdown activities for large oil and gas, refinery and petrochemical plants.

Project Engineer with Australian education, canadian experience and with very good project management skills.

Pipeline, Facilities and Project Engineer.

12 years experience in Warehousing and Logistics operations from in-bound to out-bound w/ purchasing function

More than 18 years of design experience in oil and gas production, gas processing, LNG Production, and projects of refinery, petrochemical and chemical industries. Specific experience in front end and detail engineering, process engineering/flow schemes development, process data sheet preparations

Good working experience on Instrument and control system

Senior Mechanical Piping / Stress / Equipment Engineer BS in Mechancial Engineering USA National

8yrs of working experience in the field of HVAC & Duct Manufacturing. M.S. from KFUPM. B.E. (Mechanical). Areas of Interest Heating, Ventilation and Air-Conditioning. Indoor Air Quality. Facilities Management (Inventory, Space, Maintenance,

QA/QC Enginner

PMO, Planning, Project manager, Program Director

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out