Resume - Mechanical Engineer, Project Engineer and Project Management Services

Misco Jobs

Resume #40809

CONTACT INFORMATION:
View contact information...

OJECTIVE:
There is a will, there is a way. For every job and company, my expecting is to be a Professional Engineer, learn and to do more also get better benefits.

EDUCATIONAL:
1986 - 1991 Brawijaya University
Malang, Jawa Timur
Mechanical Engineering Department
BS., Mechanical Engineering

PROFESSIONAL EXPERIENCES:
1992 - 1993 PT. Indogasraya Utama (PT. Samator Group)
Semarang, Jawa Tengah
Staff of Production and Maintenance Section

1993 - 2003 PT. Boma Bisma Indra
Surabaya, Jawa Timur
Staff of Technology Directorate PT BBI
- Mechanical Engineer - Balance of Plant Section
Staff of Project Management and Services Division PT. BBI
- Mechanical Engineer - Engineering Services Section

2003 - Present PT. Cemara Siko Engineering Indonesia
Jakarta
Senior Mechanical Engineer - Engineering Department

WORK EXPERIENCES:
1992 - 1993 PT. Indogasraya Utama (PT. Samator Group), Staff of Production and Maintenance Section.
Responsibilities:
- Processing of liquefied gas: oxygen, nitrogen and argon
- Maintenance of gas equipment and cryogenic equipment
- Design of piping gas distribution system and preparation bill of quantity.

1994 PT. BBI, Member of Engineering team for Belawan Combined Cycle Power Plant Block II project.
Responsibilities:
- Design of piping isometric and pipe supports.

1994 - 1995 PT. BBI, Member of Commissioning team for Belawan Combined Cycle Power Plant Block II project.
Responsibilities:
- Commissioning of Gas Turbine forced cooling system and Gas turbine lube cooling system.
- Commissioning of Fuel oil and Fuel gas supply system.
- Commissioning of Desalination Plant and Service water system.
- Commissioning of Demineralized water system and Boiler feed water system.
- Commissioning of Condensate water system and Circulating water system.
- Commissioning of Condenser tube cleaning system and Closed cooling water system.

1996 - 1997 Member of Engineering team for mechanical design of pressure vessels and heat exchangers.
Responsibilities:
- Preparation of Strength calculation and Bill quantity of material of pressure vessels and heat exchangers for bidding.
- Mechanical design of pressure vessels for TPPC project.
- Mechanical design of pressure vessel for Smelter cooper project.
- Preparation Mechanical design of HE for Cilacap Debottlenecking project.
- Preparation of plant lay outing and bill quantity of material for bidding.

1997 - 1998 PT. BBI, Member of Engineering team BBI - BPIS for BOP Term of reference project TA. 1997 / 1998.
Responsibilities:
- Engineering coordinator of mechanical design of circulating water system.
- Mechanical design of circulating water piping.

1998 - 1999 PT. BBI, Member of Engineering team BBI - BATAN for RUT VI.
Responsibilities:
- Design, research and development of small condenser 1 MW capacity.
- Preparation thermal calculation of small condenser 1 MW capacity.

1999 - 2000 PT. BBI, Member of Technology development team for Transfer of Technology CPO Mill design.
Responsibilities:
- Transfer of Technology for Overall Design of CPO mill 30 MT / hr capacity.
- Thermal analysis of CPO mill equipment ( Sterilizer, Clarifier etc ).
- Heat and Mass balance analysis of CPO mill 30 MT / hr capacity.
- Mechanical design for CPO Mill capacity 10 MT/ hr extendable to 30 MT / hr, Trumon, Project.

2000 - 2001 PT. BBI, Mechanical Engineer for CPO Mill PT. SAL-2 Jambi Project
Responsibilities:
- Leader of Mechanical design PT. BBI for Extension Works of CPO Mill 30MT/hr extendable to 60MT/hr,PT.SAL-2 Project.
- Preparation plant arrangement, Equipment design and preparation equipment specification.
- Site Engineer for CPO Mill PT. SAL - 2 Project
- Responsibilities:
- To provide instruction sheet and supervise during modification and installation of equipment CPO Mill30MT/hr extendable to 60MT/hr,PT.SAL-2 Project.

2001 - 2002 PT. BBI, Mechanical Engineer for CPO Mill PT. KLS Project.
Responsibilities:
- Leader of Mechanical design for CPO Mill capacity 30 MT/ hr extendable to 60 MT / hr, PT. KLS Project and preparation equipment technical specifications.

2002 - 2003 PT. BBI, Engineering Manager for Turnkey project of JSPO Palm oil mill 90 Ton FFB / hr capacity.
Responsibilities:
- To coordinate all engineering activities such as prepare engineering drawing, Technical specifications, bill of quantity etc.

2003 - 2004 PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for RioTuba Nickel HPP Project, PT. MAP Indonesia and PT SMU Project
Responsibilities:
- Mechanical design for shake out machine.
- Mechanical design for rotary kiln, and piping system.
- Supervising Fabrication of RioTuba Equipments: Hopper, Belt conveyors, Shake out machine.
- Supervising Fabrication of PT SMU Equipments: retort dryer and roasting kiln.

2004 - 2005 PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for Fe-Ni Smelting Plant N0.3 Pomalaa Project.
Responsibilities:
- Mechanical Design of Material Handling System: Belt Feeder, Belt Conveyor, Shuttle Conveyor.
- Supervising Fabrication of Material Handling Equipments: Belt Feeder, Belt Conveyor, Shuttle Conveyor.
- Supervising Fabrication of Hot air generator, water cooling system for furnace.

2005 PT. Cemara Siko Engineering Indonesia, Fabrication Manager for SAK II Poject, Sinapore.
Responsibilities:
- To coordinate and planning fabrication drum and vessel, progress control, to arrange and inspection between client and vendor.

PT. Cemara Siko Engineering Indonesia, Engineering Manager for Komatsu foundry expansion project.
Responsibilities:
- To coordinate Engineering documentation, provide bill of quantity and to expedite technical communication with vendor.

PT. Cemara Siko Engineering Indonesia, Site Engineer for Komatsu foundry expansion project.
Responsibilities:
- Supervising Fabrication of dust collecting system, installation of dust collecting system and furnace system.

2005 - Present PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for:
- Preparation of Cost Estimation for ITC Alumina calcining Plant project.

- Preparation of Cost Estimation for hydrant piping system PT TEL pulp and paper.

- Preparation of Cost Estimation for Incinerators equipment Yuasa Industries Co, Ltd.

- Preparation of strength calculation for thickener of Aluminum Hydroxide Plant Project, Korea General Chemical Corporation.

ACHIEVEMENT / TRAINING:
1995 Certificate of merit from Sobelco SA, Management site, Belawan, North Sumatra.
- Mechanical Commissioning Engineer PT. BBI.

1997 DJLPE - IWPL Training
Training for piping and equipment design and lay outing.
- Piping and equipment lay outing for power plant, calculation and material selection of piping for power plant.

1999 AOTS - ALTP Training
Training for equipment design improvement
- Design of HP and LP Heat exchanger for Power plant.

2000 CSIPMS Training
Training for CPO Mill design.
- Overall design of CPO mill, Heat and mass balance, Thermal calculation of cpo mill equipment, lay outing and calculation of effluent treatment plant.

2004 PT. Cemara Siko Engineering Indonesia Tokyo Branch Office, Transfer of Technology Program for equipment of Fe-Ni project.

EXPERTISE AND COMPETENCES:

Computer application:
- MS Office
- HTFS D301 for Mechanical design of heat exchangers
- HTFS D301 for Thermal design of heat exchangers.
- CAE pipe ver 3.7 rev.1 for pipe strength calculation and stress analysis.
- Autoplant R5.0 for plant lay outing design.

Mechanical Engineering:
- Mechanical design of heat exchangers according to TEMA Standard.
- Mechanical design of pressure vessels according to ASME Code.
- Mechanical design of Belt Feeder, Belt Conveyor and Shuttle Conveyor.
- Project Engineer.

Languages:
- Indonesia
- English

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8801 to 8850 of 10848)

Go to Search Parameters...

Brief Description

I am working as a Member of a petrochemicals company of much repute at Haldia, India for the last 4 years. Prior to that I had been working with Coates India Ltd, a chemical company based at Calcutta. I have total 6years experience in the field altogether.

I am working with Engro Chemical Pakistan Ltd., since start of 1999, as a Chemical Plant Operator at Urea Unit, and wish to join else where in the world.

branch=EEE fresher location=anywhere

Seeking possible internship/future employment

Recently graduated Petroleum Engineer from the University of MO-Rolla, seeking full time employment in the United States.

I have my IWCF DRILLER CERTIFICATE valid up to 2003. I am very much interested in joining the challenging offshore/onshore industry as an entry-level person.

I have completed Bachelor of Sciences in Mining Engineering. I want to start my career in Oil and Gas field. I am enclosing my CV. Subjects which I have studied in four years program are mentioned in CV. If you have any challenging job or post of trainee or apprentice, please do call.

Petroleum Geologist who has graduated in 1993 from Gadjah Mada University, Indonesia. Still reading several books about drilling, subsurface pressure and seismic stratigraphy until now. I learned Landmark's softwares like Seisworks and Stratsworks.

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

Safety, Environment, Industrial Hygiene, Loss Prevention, Security Program Management

I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.

Am instrumentation Engineer with 1 yr Exp in UAE.I am interested in service engineering or Operation side job

Inspection of piping.pipelines,offshore structures,welders qualification,pqr,internal audits,quality plans review,test packs review.

Project Management, Senior Mechanical Engineer, Mechanical & Piping Supervisor, Design Engineer

10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St

Exploration Geologist

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Planning Engineer, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.

HSE Specialist

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Free! Worked as a roughneck for Nabors Drilling USA and had the opporunity to go Directional for Baker Hughes INTEQ where I had been employed as a DD IV until just recently. Was laid off due to lack of work and would really like to get back to work ASAP. I am very responsible and hard working.

Lead Mechanical Piping Engineer Gas and Power Plant site office testpack hydrotest pipe support punch list

Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )

Production Manager, Process Engineer, Project Engineer, Metallurgist

Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri

-Installation the Network’s and maintenance,Interface Between systems, Corrective and Preventive Actions of Hardware and Software, Adviser in applications Maquila Systems, Customer service Maquila’s Systems. wireless communications, two way Radios,

i'm 26years old, i hold a B.ENG Degree in Petroleum Engineering from university Portharcourt, with 2 years in petroleum production operation with shell petroleum. Beside my experience i need a company who can employ me IN ANY kind of petroleum engineering JOB.

Dynamic leader and team builder, consistently motivating others toward success.

Seeking an analyst position. Highly innovative graduated offering more than 2 years in business and credit analyst experience and a proven ability to go beyond expectations. Willing to travel and relocate

Five years increasing responsibility and leadership in Power Plant, Analytical Chemistry, Mechanical Operations and Maintenance. Expert in the fields of Water Sampling , Maintenance Planning, and Record Audits

I would like to introduce my self as young ,enthusiastic Mechanical Engineer working currently with M/s Hasan Juma Backet Trdg. & Contg. LLC Oman for last two years in Water & Waste Water field. I can assure you if given a chance i can come up to the expectations of my seniors.

Marine Engineer with an experience of around 5 years at sea, looking for an opening in the oil fields.

please see below

More than 4 years experience in Oil & Gas Refinery in Construction to Start-up Worked in 3 different projects with International Companies. Installation of equipment, Precommisioning & Commisioning system

Would Like To Work In O&G Organization Where In I Can Leverage My Knowledge And Thereby Add Value To The Company. Would like to work on Onshore rigs.

ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95

diploma im mechanical engineering,able to handle all kinds of equipment s

Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.

Machinist,C.N.C. / Manual 20+yrs. experience

Chemical Engineer, Project and Quality-Security-Environmental Management

34 years in instrumentation industry.

Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training

AutoCad,Ms-Office

Qualified Geologist (Hons Applied Science) 10 years exploration experience in Soft and Hard rock Geology,( Gold and base metals) (Victoria Western Australia and Queensland experence. Also hold a Masters in Commerce Uni of NSW. Looking for a position in China as wife is from Beijing.

I am a skilled secretary, help director with the routine works, responsible for providing secretarial and administrative support to all divisions, Project , Proposal and Procurement , Finance, Sales and HSE, manage company filling system, prepare and compiling bid administrative documents

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 [ 177 ] 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out