Resume - Dear sir Service engineer in Yemen. I have good knowledge about electrical syst...

Misco Jobs

Resume #4133

CONTACT INFORMATION:
View contact information...

RESUME

Objective: To excel in the field of Power plant Engineering
To acquire Managerial skills

Experience
1)M/s Tehama Trading Company, Yemen

Designation: Electrical Engineer

Period: From August 2003 to till date

Responsibilities: 1) To commission the Caterpillar Gensets
2)To provide quality service to Caterpillar Products

2)M/s Wartsila India Ltd

Designation: Engineer Service

Period: 6 years

Responsibilities: 1) To provide quality service to Wartsila and other Wartsila group Companies.
2) Collection of technical and measurement data from sites.
3) Travel widely for Electrical Service for Wartsila sites and also associated in Project Commissioning.
4) Good knowledge in the following (Wartsila 32and Wartsila 46Engines)
a) Calibration of all sensors, Pressure and Temperature switches b) Calibration of Temperature and Viscosity Controllers, and Fuel Flow meters c) Complete overhaul of 4MW, 6MW, 15MW Alternators.
d) Engine auxiliary unit Panel boards.
e) 11kV&110kV Circuit breakers operation and maintenance.
f) 110kV Switchyard operation and maintenance.
5) Carried out several AMC 's and overhaul's at Wartsila sites.
6) Testing of Protection Relays, Controllers and other Instrumentation Components in Electrical Workshop

Automation:
1) Installation and Commissioning of Modicon PLC
2) Good knowledge in Troubleshooting in PLC

Project
Experience:

10 MWCPP (1x4MW, 1x6MW) M/sChemplast Sanmar Ltd, Mettur
Involved in Complete Testing and Commissioning of Control&Relay panels 7.5&5MVA Alternators, 500kVA Transformer (Wartsila 32 Engine)

106MW IPP (7x15.14MW) M/s Balaji Power Corporation Pvt Ltd a) Erection of MV and LV Panels b) Planning the Laying and Termination of all LV &Control cables for Engine,
Engine auxiliaries and Switchyard c) Complete Testing and Commissioning of Control &Relay Panels, LV Panels
11kV &110kV Circuit Breakers and 20MVA Alternators d) Complete Testing and Commissioning of Control &Relay Panels, 40MVA Generator Transformers, Outdoor CT'sand CVT's in 110kV Switchyard e) Operation and Maintenance of 110kV Switchyard and dealing with TNEB

12 MWCPP ( 1x6MW) M/sSpic Pharma, Cuddalore a) Erection of MV and LV Panels b) Planning the Laying and Termination of all LV &Control cables for Engine,
Engine auxiliaries c) Complete Testing and Commissioning of Control &Relay Panels, LV Panels
6.6kV Circuit Breakers and 7500KVA Alternators
6 MWCPP ( 1x6MW) M/sBilt Bio chemicals, Baroda a) Erection of MV and LV Panels b) Planning the Laying and Termination of all LV &Control cables for Engine,
Engine auxiliaries c) Complete Testing and Commissioning of Control &Relay Panels, LV Panels
6.6kV Circuit Breakers and 7500KVA Alternator
50 Nos 850kVA Caterpillar Gensets Canadian Nexen Petroleum,Yemen a)Erection and Commissioning of 50 nos 850 kVA Caterpillar gensets and handover to customer

Technical Education:
1) Diploma in Electrical and Electronics Engineering (1994-1997)
P T Lee Chengalvaraya Naicker Polytechnic, Chennai
2) Currently doing AMIETE
Additional
Qualification:
1) Attended the Training course conducted by M/s AEG Groupe Schneider
Electric India Ltd on Modicon PLC System at Delhi
2) Attended the Kayakalpa Yoga and Meditation Training Course Conducted by Vedathri Maharishi Mutt, Arakkonam
3) Attended the Yoga and Stress Management Course Conducted by
Sanjeevani Chennai.

Computer: MS Office
Knowledge

Languages Known: Tamil, Telugu, and English

Hobbies: 1) Collecting Technical information from Magazines, Technical books, Technical writeups, Catalogs, and Internet etc.
2) Internet Browsing and Chat
Preferred job: Electrical &Instrumentation

Personal Details

Date of Birth: 10.10.1978

Age: 25years

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6301 to 6350 of 10917)

Go to Search Parameters...

Brief Description

I am organized and detail-oriented, work well under pressure and deadlines, enjoy working with a variety of people. I also have a great attitude and enjoy working in a creative, challenging and growth-oriented working environment.

Dear sir Service engineer in Yemen. I have good knowledge about electrical systems and I have 6 years experience in Electrical power plants field, I hope I can perform best of my knowledge if I get opportunity in your esteemed organisation.

experienced professional in corrosion seeking job opportunities world wide.

Worked on a variety of projects as a process engineer in Europe, Australia and the Middle East. Assumed roles of project engineer, lead process engineer and process technical focal point for operations during career. Use of the process simulations Hysis, Hysim, Proii and PIPESIM.

15 years of experience in QA/QC, Welding Inspection, Piping systems, Pipelines, NDT & Plant Inspection with a valid certificates of CSWIP Plant Inspector, CSWIP 3.2, AWS CWI, ASNT Level II in RT, UT & MT. Computer literate with UAE Driving Licence.

15 Years of HSE experience in oil & gas field.

British MSci petroleum geology 1998-2002

I have fifteen(15) years of experience in the oil industry as floor hand and lately as warehouseman, I have worked in offshore operations and inland operations.

I have 15 years experience in metrology & instrumentation in calibration laboratory, pharmaceutical company & petroleum company.

BRIEF OVERVIEW •Accomplished Mechanical Engineer Involved in designing, engineering, execution, quality control, construction and implementation of ISO-9001 processes in the field of refineries, petrochemicals, chemicals, material handling and offshore projects for over 9 Years.

Summary of Experience: Eight Years in total on the following activities. Welding, painting and Lifting Inspection.

First Line Supervisor (driller), Compliance Officer (certified construction officer), 5 years Post Secondary Education including Business & Finance Diploma

Experience welder and heavy equipment mechanic

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

Geophysicist

Contract design, award and management, procurement plans, purchasing, invoice payments and cost control, contract administration

I have bachelors in mechanical Engineering and Masters in Petroleum Engineering.I have working Experience in Pipe line and EPC Companies

Well Service Supervisor or Coil Tubing Supervisor

Miantenance Engines and pumps - Computers skills

I have Diploma in Instrumentation & Control. I working in same field last 8years I have all certificate which fulfill your all requirements. To work with a progressive, professionally managed organization in competitive and rewarding environment. I have equipped myself conceptually and practically

Degree from "College for chemical technologies".

Safety Engineer with Refinery Experience 6 yrs

Solid organizing and planning skills

B.E telecom engineer.

Excellent Communicator • Bilingual - Spanish • Procurement/Logistics

I have 2 years’ experience within the Upstream oil and gas industry. This has afforded me the opportunity to develop a good knowledge and understanding, of a Production background. I have recently gained a NVQ level 3 in Process operations and would like the opportunity to enhance my experience.

Experienced Terminal Operator and Supervisor in the Petrochemical field with an excellent safety record and multiple Oil Industry related skills. Very Health and Safety orientated with a high regard for HSE Regulations and a NEBOSH Qualification in Occupational Health and Safety

I like work.

I know how to organize my activity

Awarded 'Best supply chain personnel' from the Minister of Electricity. Reduced inventory value and lead time by identifying cost saving /part standardization initiatives, purchase avoidance, centralized purchase and standard localized supply .

I AM HIGHLY MOTIVATED & ADAPTABLE MATERIALS/ LOGISTICS SPECIALIST: with over 20 years professional operations experience in all aspects of Materials & Logistics, Exports/Imports administration, MMaterials Co-ordination Expediting, Inspection, Inventory Control, Warehousing, & Supply Chain Managemen

Contracts Manager; Procurement Manager; Subcontracts Administrator; Contract Administrator; EPC oil & gas downstream construction.

A proven Welder highly skilled in the areas of aluminum, ferrous and non-ferrous (CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.

Monitoring production and running diagnostics on well performance, maintaining flow lines, scheduling and supervising wireline/swabbing programs, optimizing plunger lift systems, monitor pressure and flow readings, identify any safety or environmental issues.

Experienced Assistant Driller with 5 + years drilling in Wyoming for Nabors Drilling.

Estimation and Costing,variationsnad claims,Monthly Progressive Bill preparations

I have been a Mechanic now for 5 years and worked offshore as a rig mechanic for 2 years.

DOCUMENT CONTROLLER

fit pipe fallowing by blue prints and weld pipe whith tig,mig,stick and flux core

Senior Electronics Technician

3+ years of experience in Electrical Design of Commercial and Process Industries with fair knowledge of ETAP.

A Certified Human Resources Professional with practical and progressive experiencein Africa, Central America, Canada, USA, Central Asia and the Asia-Pacific region.

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

Documents Control, Project Documents Control, Administration Assitant, Secretary

i can analys the hazard working conditon by using Job Safety Analysis, Risk Assessment and Hazard identification, implementing the safety policy in a good bahavioral way that people can follow the safety rules, im a good trainer in safety firefigthing, first aid, handling ang lifting procedure

I am a degree qualified Instrumentation and Control engineer / technician. I am looking for contract work in the oil and gas industry and I have offshore experience. I have full medical and am OPITO BOSIET certified. I am willing to relocate worldwide and will consider any shift rotation.

To obtain an exciting and challenging career as a Geological Engineering Technologist in the Oil and Gas Industry so that my past experiences and training can grow.

International Field Experience (USA, Aberdeen UK, Dubai, Brunei) with Baker Atlas as a Wireline Logging Engineer, Masters Degree in Petroleum Engineering, B.Sc Undergraduate degree. Currently in Perth, Australia and willing to relocate OR work on rotational basis

5 years of full-time experience in Refinery, Chemicals. An Engineer with MBA.

Diploma In Mechanical Engg. with 6 Yrs exp in Piping Designer

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 [ 127 ] 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out