Resume - 7 years experienced in Oil Refinery Operations . 8 years experienced in Petro...

Misco Jobs

Resume #4164

CONTACT INFORMATION:
View contact information...

C U R R I C U L U M V I T A E

Personal information

Nationality: Romanian ; Birth Date: 07- 05-1955
; Civil Status: Married / one child

Qualification

Ph.D. Eng. in Chemical Engineering, Major in Petroleum & Gas Processing Engineering.

Education

* DOCTOR OF PHILOSOPHY: July 1993, Petroleum & Gas University Ploiesti, Petroleum & Gas Processing and Petrochemistry Dept., Ploiesti.

* MASTER OF SCIENCE: June 1980, Petroleum and Gas University Ploiesti, Petroleum & Gas Processing and Petrochemistry Dept., top 8 %.

* Career Summary

20 years of experience in On-shore/Refinery Oil & Gas Operations / Oil & Gas Processing Engineering, out of which:

„« 7 years experienced in Oil Refinery Operations as Topping & Vacuum Unit, Fluid Catalytic Cracking, HF Alkylation, Catalytic Reforming & Nafta Hydrotreating, Gas Fractionating, Aromatics Separation, Delayed Coking, Sulphur Recovery..

„« 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes).
„« 5 years of international exposure in Europe ( Germany, Italy ) Asia ( Malaysia ), Africa ( Libya ), Middle East ( UAE, Oman ), acquired in Oilfields, Petroleum Refinery, Gas Plant and Power Plant Operations, taken part in works of 5 International prestigious Projects.

Professional experience

06/02 ¡V 05/03 Concept Process Engineer with Electrowatt Engineering (Oman), Muscat, Oman.
Seconded in South Oman Engineering team.

Responsible for transient analysis of oil pipelines under various scenarios. Reviewed adequacy of existing protection and proposed changes where required.

06/01 ¡V 06/02 Concept Process Engineer with Electrowatt Engineering (Oman), Muscat, Oman.
Seconded in Petroleum Development Oman L.L.C (Qarn Alam Asset Team).

In the role of Concept Engineer I provided process engineering expertise for the identification, appraisal and conceptual development of upstream oil and gas projects.

Core Duty: carry out conceptual engineering and optimisation studies in order to define engineering projects in terms of technical scope, cost execution strategy and duration.

Specific Responsibilities include developping sound concept engineering designs against a backdrop of uncertainty/changing parameters, creating operating envelopes, evaluations of various concepts, carry out process simulations and optimization using engineering packages as Hysis, Pipesim, speeadsheet calculation to rate or size process equipment, well hook-ups, documented concepts selection. Used UTC calculations spreadsheet, carried out Life Cycle Cost,provided inputs for Programme Build and forecasts. Took part in the Value Assurance Reviews Team. Proposed solutions to debottleneck the existing production facilities in Barik Oil Station (using of a PCHE, increasing the propane chilling capacity), supported Operations to monitor and assess Station performance.

Took part as Process Engineer in the team of Barik Main Devlopment Project (Gas Reinjection) and participated in reviewing and approve process discipline deliverables issued by Front Enginering Design Contractor (PARSONS LLC, Oman). Reviewed and optimized the various design cases, participated in the Hazop and IPF (Instrumented protective function) exercises. Familiarised with PDO and Shell DEPs, API Standards as well as Codes of Practice.

08/99 - 04/01 Senior Process Engineer, Sulphur Project ¡V RAM Petroleum Refinery ( A JV of AGIP PetroliS.p.a & Kuwait Petroleum Corp. ) Milazzo, Sicily, Italy.

Core duty: Process Engineering Follow¡VUp of BDP performed by Foster Wheeler Italiana for a New Gasoil Desulphurisation & FCC Amines Unit Revamping, New LPG Merox/Deethaniser Unit & Kero-HDS Amines Unit Revamping, New PSA Unit for Hydrogen Purification, New VSA Unit for Oxigen Separation & CLAUS /TGTU Plant Revamping, to boost the refinery capacity of processing Kuwait High-Sulphur Crude Oil.

Specific responsibilities: Liaisons with other Discipline Engineers and End Users in order to develop cost effective, safe and fit-for-purpose design solutions. Have the responsibility in assisting to resolve outstanding problems quickly and to the mutual satisfaction of both Operations and the Project Team. Attend review meetings with Engineering Contractors (Technip & Snamprogetti), Process Licensors (Parsons, Storck, UOP, Linde) and relevant Equipment Vendors (Nuovo Pignone, Akzo Nobel, Atlas Copco) in order to clarify any arising operational issues and to ensure any potential obstacles are overcome so as to avoid any delays to the Project Schedule.

Review process data sheets for equipment and instruments, all PFD's, UFD's, P&ID's, cause & effect charts. Checks the adequacy of designs, to ensure fitness for purpose and technical quality, in terms of providing safe/environmentally operations and facilities, in compliance with the BDP, Codes, Standards, Principles, Procedures, Practices and Specifications.

Assist in the establishment of Process Control structure as well as the Emergency Shutdown (ESD) and Fire & Gas System Philosophy. Reviewed also equipment shutdown conditions, particulary the interlocking diagrammes, alarm and trip settings.

Participated in the HAZOP Team and use hand-on refinery experience, engineering priciples and know-how, in order to ensure that adequate protection has been provided and to guarantee the safety of the plant personnel and the integrity of the process equipment. Ensure that all local and national safety regulations have been adopted and the plants are safe operated.

Review and approve on behalf of Operations Department the Operating Manuals, Equipment Flushing, Inerting and Drying-out Procedures, Lube Oil Dossiers and all Tie-ins connections. Review and approve functional test procedures and witness the functional tests, prepare punch lists and follow with contractors to clear all items as per the Project scope. Review the Commissioning, Start-up & Shutdown Procedures as well as Mechanical Completion and Ready to Start-up Certificates. Participate in Plant Pre-Commissioning, Commissioning and Start-up activities using existing operational experience to avoid delays in performance test.

05/98 - 07/99 DCS Process Operations Trainer for a Foxboro I/A Series DCS - Peninsular Gas Utilization Project - Gas Processing Plant 5&6 Package (2x 500 MM Scfd Sales Gas Capacity) for PETRONAS GAS Bhd.,Paka,Terengganu, Malaysia, employed by Daelim Engineering Ltd. & Snamprogetti S.p.a Consortium.

Taken part in works of Commissioning, Start-up, Performance Test and Post Handover Assistance of Dew Point Control Unit (DPCU3) and involved in Commissioning and Start-up of GPP5 Plant.

Main duties: Training DCS Operators to control preliminary gas and condensate separation, acid gas removal, gas dehydration, condensate stabilization, NGL recovery and separation as well as propane refrigeration cycle, by taking proper action and guiding the field operators in order to maintain the products quality within the specifications limits. Skilling same ones to operate heat transfer equipment - fired heaters, tube and shell heat exchangers, air coolers, plate fin exchangers (cold boxes), dinamic equipment (pumps, reciprocating and centrifugal compressors) as well as gas-liquid and liquid-liquid separators, amine absorbers, fixed bed adsorbers and distillation columns (NGL condensate stripper, demethaniser, deethaniser, depropaniser, debutaniser). Trained operators also to accomodate with PLC's sequences, complex loop and combined feedforward/feedback control, to tune various types of linear PID controllers by manual tuning or by selftuning, to use the nonlinear control to stabilize the plant run, to trend plant parameters, to respond to process alarms and to activate the plant emergency shutdown system.

02/97 - 04/98 Head of Separation and Energy Conservation Division, Oil & Gas Processing Engineering Dept., ICERP-SA ( Romanian Institute for Design and Development of Petroleum & Gas Processes ), Ploiesti, Romania.

Responsibilities: Conducting and managing projects and engineering studies dedicated to:

Profitability Improvement of Romanian Refineries by:

* performance analysis of existing primary processing units as Crude Topping as well as secondary ones - Fluid Catalytic Cracking,Catalytic Reforming, Delayed Coking, Lube-Oil Furfural Extraction and Solvent Dewaxing, Light Ends and Aromatics Fractionation, Claus, and identifying the adequate revamping solutions ;
* screening of refinery processing alternatives in order to adapt to frequent crude-oil quality fluctuations using linear programming;
* using evoluted software simulation packages as Hysim, Pro II, Chemcad III, to rate and size process equipment ;
* issuing flowsheets, PFD's and P&ID's, as well as preparing equipment specifications and data sheets ;
* technical assistance, training and consulting activitities in order to improve operating phylosophies.

Energy Conservation in Petroleum Refineries by:

* applying of modern thermodynamic concepts ( entropic or exergetic method) in order to identify the available work losses for either existing or new refinery proceses;
* distillation trains synthesis by implementing energy conservation specific solution to increase their thermodynamic efficiency ;
* benchmarking of distillation alternative separation processes as adsorbtion, parastillation, reactive distillation, centrifugal distillation, supercritical extraction, membranes diffusion and/or to select the best option of distillation process configuration (trays vs packing), use of a heat pump, optimising design operating pressure and feed tray location, identifying proper mass and heat transfer enhancing devices;
* finding out managing solutions to lower the energy consumptions in refinery processes ;
* implementing of advanced control systems.

Gained experience in the field of quality control of Process Units either by on-line analysers and lab testing methods. Skilled to check the quality of crude oils and of various petroleum cuts as well as residual water streams. In addition, carried out new experimental procedures in order to develop modern testing methods and statistical processing of the experimental data. Throughout '87-'97 period, performed 59 Engineering Reports, presented 19 Scientifical Papers at various meeting (10 published or in press), advised 3 M. Sc. Thesis and worked out 3 Patents.

05/96 - 01/97 Shift Supervisor, Mirfa Power and Desalination Plant, General Contractor Ansaldo Energia S.p.a, employed by Telford Intl. Ltd. in Water Remineralisation - CO2 Production Plant, Mirfa, United Arab Emirates.

Duties: Precommissioning, Commissioning, Handling Trials, Start-up, Performance Test. Performed checks of the conformity of the plant equipment against project documentation - P&ID, isometrics, specification data sheet and other various drawings and removed out all deviations in geometry, material quality etc.

Checked also the functionality of process equipment according to dedicated procedures. Skilled to operate limestone filters & backwash sequences, chemicals dosing - chlorine, oxygen, dosing, hexametaphospate, carbon dioxide as well as CO2 Plant equipment ¡V burners, absorption and desorbtion columns, dryers, compressors and centrifugal pumps, sea water filters, refrigerant cycle. Dealt with quality control schedule - total hardness, conductivity, anions content, residual oxygen and chlorine content.

11/95 - 04/96 Head of Separation and Energy Conservation Division, Oil & Gas Processing Engineering Dept. ICERP - SA, Ploiesti, Romania.

Core Duty: Conducting projects focusing on new software developing and applied thermodynamics in order to improve the engineering calculation methods. Specific responsibilities:

* prediction of V-L equilibria for undefined mixtures and multicomponent systems using various Equations of State (S.R.K., P.R., B.W.R., K.D. L.K.);
* numerical simulation of the crude-oil distillation columns;
* phase equilibria investigation in ideal, non-ideal systems or undefined mixtures;
* reconciliation of the mass and thermal balances data ;
* mass transfer enhancing in liquid - liquid extraction, distillation and absorbtion processes.

03/95 - 12/95 Applied Thermodynamics Engineer, Technical Thermodynamic Dept., Kaiserslautern University, Kaiserslautern, Germany.

Responsibilities: Performing experimental investigations on the multiphase high pressure equilibria in the ternary Carbon Dioxide-Water-(1-Propanol) System. Skilled to measure thermodynamic properties of sub and supercritical CO2 containing mixtures, compositions, phases distribution, densities, critical points, enthalpies, entropies in order to describe phases behaviour vs. working pressure and temperatures. For above purpose used typical high-pressure lab testing equipment such as gas cromatograph, high - performance liquid cromatograph, densitometer, equilibrium cell and processed the experimental data by computer.

09/93 - 02/95 DCS Board Operator, Bu Attifel AGIP (NAME) NGL Plant ( 380MM Scfd ), with COMERINT& SNAMPROGETTI S.p.A, Libya.

Duties: participate in works of Precommissioning, Commissioning, Start-up and Performance Test. Skilled to use a ABB Masterview 850 DCS, in order to improve the economical effects and the safe run of the plant. Accustomed to operate both dynamic - pumps, centrifugal and reciprocating compressors - and static equipment such as heat exchangers, heaters, molecular sieve dryers, distillation columns, PSA process and electrodialysis reversal (EDR) Units. Involved also in NGL recovery, Three-Phase Separators and Crude Oil Stabilising, Desalting & Demulsifing.

09/87 - 08/93 Development Engineer, Oil & Gas Processing Engineering Dept., ICERP SA, Ploiesti, Romania.

Responsibilities: Performing applied research and conceptual design focussing on the development of new refinery processes, as following:

* pilot studies and engineering to develop new products and/or Rrfinery processes - MTBE, TAME, Nafta and Middle Distillates Hidrodesulphurisation/Hydrotreating, Hidrocracking of Heavy Distillates, Short Residuum Conversion, Gasoil Hidroisomerisation, to deeply convert the crude oil ;
* termophysical properties measurement of the petroleum fractions and light hydrocarbons;
* investigation of the formation, stability and breaking of crude oil - water emulsions in the presence of electric field and surfactants, to optimize the crude - oil dehydration and desalting process;
* crude oils caracterising and physical properties investigation of distilled cuts;
Concerned also with preparation of project budgets and equipment procurement.

06/85 - 08/87 Shift Supervising Engineer, Petrotel S.A. Petrochemical Works, Ploiesti, Romania.

Assigned to work within Steam Cracking Plant (200,000 tpy ethylene), in Furnaces, cold and hot separation, High-Pressure STEIN - Boiler and the Feed Water Demineralisation Units.

Responsibilities: start-up, troubleshooting and debottlenecking, resources allocation, improving quality and increasing the yields of valuable products, lowering the energy consumptions.

09/80 - 05/85 Junior Process Engineer, Petrotel S.A. Fuel & Lube-Oil Refinery (5 mil. tpy crude), Ploiesti, Romania,

Worked in CDU/VDU, Catalytic Cracking and HF Alkylation, Delayed Coking, Claus, LPG Merox, Nafta Hydrotreater, Catalytic Reforming and Gas Fractionating Units.

Responsibilities: Precommissioning, Commissioning, Start-up and Test Run, troubleshooting, environment protection, corrosion prevention, turnaround activities scheduling.

Skilled to check the conformity of equipment against project documentation as P&ID, isometrics, specification data sheet and other various drawings. Performed also preparatory works such as internal inspection and filling of process vessels, testing instruments and process equipment functionality, handling trials for heat exchangers, heaters, molecular sieve dryers, distillation columns, reactors, pumps, centrifugal and reciprocating compressors, steam turbines.

Taken part in Commissioning and Test Run of MTBE Unit in RAFO S.A Refinery in 1982.

Language abilities

Language Speaking Reading Writing
English Good Very good Good
French Good Good Good
Italian Good Good Good
German Poor Good Poor

Computer skills

Experienced to use general software - Windows, MS DOS, oriented packages - MS Office,MS Works, Corel Draw, Corel Flow and various software packages for the simulation of chemical processes such as Hysis, Pipesim,Pro II, TLNET and Fred.

Relevant expertise areas

Oil & Gas Process Engineering, Oil Refinery Operations, Design/Research/Development, Commissioning and Start-up, Power Plant Operations, Oilfield Operations, Energy Conservation, Applied Thermodynamics, Separation Processes.

Professional associations membership

Member of Romanian Association of Chemical Engineers, Romanian National Surface and Colloids Engineers Association and Prahova's County Scientist Association.

Personal appraisal

Fast learner and having the ability to analyze and integrate information quickly and to propose creative solutions. Strong desire to succeed and bring real drive and enthusiasm to all activities. Good interpersonal, communication and strong team working skills. Demonstrated leadership strengths. Ability to work with a minimum supervision and to drive studies to completion as a lead engineer Proven team worker with a positive and open attitude. Exposed to business planning and economics, developing strategies and managing uncertainties.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 10816)

Go to Search Parameters...

Brief Description

I am a post graduate in chemistry working as Senior Chemist in KOC.Well experience in crude oil, Gas and Water analysis. Handling of all kind of Lab Instruments,Calibration ,standard chemicals preparation, reports making are the responsibilities.

Lead/Senior Mechanical Engineer- Oil & Gas, Chemical, Petrochemical and Energy Industries

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

I am a B.Sc Chemistry degree holder and have totally 24 years of very good experience in PROCESS FIELD / PANEL operations in oil/gas treatment plant. This is one of the biggest oil processing plant in India. SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LTD., (SPIC).

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

Outstanding background of knowledge’s into oil and gas processing and utilities, more then 14 years experience into commissioning and process activities from which more than three years offshore, working into an multicultural team and with all disciplines engineers, proactive and disciplined

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

20 years experience. Executive with proven management, operations, P&L management, and business law experience. Communicator, negotiator, and capital raiser. Global, regional, and country specific business expertise.

Challenging job related to oilfield, where I can capitalize on my 23 years of oilfield experience with Schlumberger in management, sales, marketing and contracts negotiations. No geographical preference. No schooling constraints.

20+ years experience in private/public sector contract, program/project mgmt. Domestic & international E&P and technology development with major/independent/service companies. Identified significant oil/gas reserves through innovative mgmt. of multidiscipline teams.

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

I have completed a BSc in Geology and a PhD in Petroleum Engineering. In the last 20 years working for BP I have worked as a Production Technologist, Completions Engineer, Reservoir Engineer and in Production Operations, both onshore and also offshore on an FPSO, in recent years as a Team Leader.

Geophysicist, 4+ years of experience in the seismic data processing onboard & in data processing center. Ph.D. in the field of Geophysics. Skills: Seismic Data Processing (2-D/3-D) by ProMax & Focus, imaging by Geodepth (Depth-Velocity modeling, Depth Migration), AVO analysis by Probe.

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Professionally Qualified Engineer / Manager, Harvard Business School Alumni, Certified Project Manager (PMP) - Now In General Management In Oil & Gas Up & Mid Stream

I graduated from Sultan Ageng Tirtayasa University, in Indonesia on October 2004, majoring Chemical Engineering Degree. I have experienced working in petrochemical plant. During 10th years I have ever been worked at PT. Asahimas Chemical Indonesia ( VCM/EDC Plant ) from 1997-2007

City and Guilds Motor Mechanical Technician Diploma and full tech certificate. Languages: English, Arabic and French Spoken fluently

PDS Frameworks, Autocad, Microstation

Objective. Seeking an increasingly responsible position with an opportunity for professional challenge and growth while combining my areas of experience in the field of electrical works to support and enhance corporate goals and objectives. Educational Qualification. 1.Diploma in Electrical Engineer

Trained Radiation Protection Officer & Health Physicist from India

I have sailed as Master on Tankers and have good experience in Oil / Chemical / Gas Tankers.

Skills: •Able to take proper and quick decision. •Very much interested to work in technical environment. •Excellent ability of producing and reading working drawings. •Able to work alone or in team very environment. •Able to manage all aspects regarding to engineering. •Electronics understanding

I am a dedicated, performance and goal oriented multi-tasker who will do whatever is necessary to help the company reach its maximum potential.

Applying for the post of HSE CO-Ordinator

Assist sales team in all technical challenges while meeting with clients, check & modify well plans,calculate Torque & Drag, drill string & BHA assembly,hydraulics,• Managed and maintained up to 45 jobs in Southern Manitoba, Southern Saskatchewan, all of Alberta and Northern British Columbia.

28+ years with broad experience in Petroleum Engineering (Facilities, Production, Reservoir, etc.). Onshore, offshore, international. Any location considered. Rotational position preferred.

A self starter, motivated and eager to learn new things, willing to provide guidance and help others become team players by setting an example and leading the way.

Seeking a challenging position in Chemical, Oil-Refining, and Petrochemical Engineering field where my technical, professional, and problem solving skills can best be utilized for the future growth of the company.

Drilling Supervisor/Engineer with B.S. in Petroleum Engineering and 30 years experience.

Senior Offshore Structural engineer with 13 year of post graduate experience in analysis & design of offshore structures

Strong managerial and technical skills successfully proven in planning, executing and managing business process, projects and Drilling & Warehouse operations, delivering timely results. Analytical, client-oriented, problem solving, leadership and communication abilities complement my professional

20+ years experience as Piping Designer in FEED, EPC, EPCM, Detail Engineering in Oil & Gas, offshore,Petrochemical,and Refinery & Chemical industry.

Experienced, registered professional petroleum engineer with 20+ years direct petroleum-related experience. Two graduate degrees in Petroleum Engineering (Stanford University). Extensive management experience with senior technical professionals in all related disciplines.

Consultant in well stimulation, well completion, production operations and reservoir engineering. Designed and supervised: - Hydraulic fracturing and TIF, Western Siberia - Massive hydraulic fracture in very high temperature reservoirs - Matrix acidizing, acid fracturing, scale control

I put at your disposition 23 years of experience in the laboratory and field activities at PDVSA-Intevep, Research Center and Technological Support for the Oil Industry of Venezuela, with the drilling & completion and materials performance groups for production operations.

Petroleum Engineer

DSV with over 20 years experience.

Diploma of Associate Engineer (Telecommunication / Electronics Technology), Computer uses Certification in Software Application, Installation and Hardware troubleshooting with maintenance. Pakistan, Certificate of instructions on computer operating systems, Basic training of Radio mechanic

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Chemical Engineer with experience operations/erection/commissioning of Oil and Gas,Large Chemical Complex

Conceptual design, front end and detailed engineering of process plants including preparing piping layouts , equipment layouts ,plot plan,Preparing and checking PDS 3D/Auotplant models,Isometrics,Pipe support and stress analysis,MTO,BOM,Manpower Management,to complet project within budget and time

Commissioning, Start up Specialist, Operations Supervisor, OJT, Proactive multi-skilled Team Leader with detailed knowledge of process plant/man-management. HND in Chemical Engg; Valid Offshore Pasport Holder.

I have experience with rotating equipment such as turbine, compressors, motorrs, pumps and gearboxes.

12 years of experience in various design, training and project planning activities which involves Static and Dynamic Stress Analysis of different Nuclear, Petrochemical and Pharmaceutical Piping Systems, Selection and Design of Pipe Supports, Piping Layout design, Isometric Drawings, Integrated Pla

Maintenance & Mechanical Commissioning Supervisor

Proect control enginner cost control and senior planner for EPC projects

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out