Resume - As an active electrical designer within radar, sonar and instrumentation for ten...

Misco Jobs

Resume #4203

CONTACT INFORMATION:
View contact information...

PROFESSIONAL SKILLS

* A dedicated professional capable of independent product developments
* An established ability to work within a budgeted framework to meet a client's needs
* A demonstrated technical ability to work within multi-disciplined environment
* Holds extensive experience with CAD used within the manufacturing process
* An effective communicator with both technical writing and seminar hosting experience

EDUCATION

1992 Memorial University of Newfoundland; St. John's, NF
B. Eng (Electrical)

1984 The College of Fisheries; St. John's, NF
Diploma of Electronics Technology

PROFESSIONAL EXPERIENCE

SENIOR ELECTRICAL ENGINEER
Guigné International Ltd.
St. John's, NL
September 1999 to November 2002

* Senior electrical engineer responsible for new product developments
* A chief contributor in active support of Quality Assurance
* A project leader concerned with fiscal management, inventory control and required technical support.
* Technical support for embedded computer systems for a diverse array of control systems associated to sonar/radar/instrumentation electronics. This includes Electromagnetic Compatibility (EMC) testing.
* Completely successful design results for Space DRUMS, Aqua DRUMS and APL DRUMS product assignments

DESIGN ENGINEER
C-Tech Limited
Cornwall, ON
August 1998 to August 1999

* Prime consultant to project management in the areas of electronics design with circuit simulation verification.
* Hands on prototyping of new product designs
* Direct manufacturing and engineering support for new product developments
* Detailed analysis of electrical designs with respect to future quality control issues
* Schematic and printed circuit board developments

JUNIOR DESIGN ENGINEER
Raytheon Canada Limited
Waterloo, ON
November 1996 to July 1998

* Engineering support of diverse RF hardware assignments for a new generation of Digital Airport Surveillance Radars (DASR) for the U.S. Federal Aviation Authority (FAA)
* Design engineer solely tasked with the development of the DASR down converter, using the most leading edge semiconductor technology
* Schedule planning under Microsoft Project with respect to critical engineering timelines
* Extensive work with high speed analog to digital circuitry associated to optimize a radar's dynamic range and noise figure
* Interactive department liaison to communicate a cooperative effort between Analog Engineering, Product Design, Manufacturing and Quality Assurance departments
* Software development of test software for future product qualifications. This exceeded NSTI (National Standards Test Institute) goals.

RESEARCH DESIGN ENGINEER
C-CORE
St. John's, NL

May 1992 to September 1996
* RF engineering and technical support for a High Frequency Over the Horizon (HF-OTR) radar
* Maintenance responsibility for all analog RF hardware, including antennas, receivers, power amplifiers and its complete signal distribution/control chain.
* Hands on use of various RF test equipment that includes the use of a Network/Spectrum Analyzer
* Analog and digital design support for a various instrumentation deployments in the field
* The co-creator of the Digital Acoustic Ranging Transceiver (DART) used by the National Research Council's Institute for Marine Dynamics in support of ice modeling experiments
* Proposal support and new product developments, as directed under C-CORE management

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5851 to 5900 of 10816)

Go to Search Parameters...

Brief Description

pipe fitter,6G certified gtaw& smaw welder ,field experience, saudi arabia Aramco project, Malaysia liquified natural gas under hyundai constraction, kellogs proponent , petron bataan refinery Philippines

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

LekCV

Diploma in mechanical engg.

Engineering Graduate with extensive offshore drilling experience and strong IT skills

Canadian Wellsite supervisor and Production Foreman w/ extensive International experience, Supervising workovers & completions. Provided practical operation solutions to facilities in Russia, Kazahkstan, Kyrgystan, India and Canada.

significant experience as Production operator in Oil & Gas Production and Processing industries around FOUR years experience.  Reviews unit operation data(shift supervisor /engineer log ,etc)and analyses this data to determine potential problems and ensure that unit operatio

Experinced in process activities as well as technical service dept.Handling production of oil manufacturing such as metalworking fluids,wax,grease etc.,giving support to serivce engineers if any required.

More than 10 years experience in the petroleum, petrochemical, power, chemical weapons demolition, sheet metal and bridge manufacturing with quality assurance and quality control functions with current qualification as AWS CWI and API 510. Included is new construction, unit turnarounds, vender surve

Diploma in PETRO CHEMICAL TECHNOLOGY

QA/QC, NDT INSPECTION, CONSTRUCTION QA/QC & CERTIFIED LEAD AUDITOR

Project Engineer Subsea (Oil & Gas)

I am a science graduate Mumbai University, India. I am in Instrumentation field form last 10yrs. I had an excellent opportunity to work on different types of field instruments, On-line Gas chromatographs (PGC), different types of analysers, D.C.S., E.S.D. andPLC.

I have an excellent amount of experience in the Personnel/HR management 12 years (1996 – present). My current position is HUMAN RESOURCES MANAGER /ADVISOR, Abu Dhabi.

seven years of experience in process engineering support, basic and detailed engineering, commissioning, and plant operation of gas sweetening (using specialty solvent, MDEA), dehydration of the sweetened gas, polyethylene terephthalate production and wastewater treatment units

Experienced mud engineer

Experienced gas Pipline Engineer and Strong background in Petroleum Engineer

Senior instrument technician

A system engineer with more than ten years experience in process control and oil field development and implementation.

Key Qualities 10 years experience in plant design and piping lay-out. 4 years experience in using Intergraph’s PDS 3D system. Experienced in Auto Cad, Microstation, Autoplant 3D Finished PDMS training course, Modules 1 and 2

Field: Technical Services (Petroleum Fuels) Experience: 10 years (6 years in Petroleum Sector)

I have been associated for the past 10 years with Fertilizer & Petrochemical Industry. I have worked as a Senior Metallurgical Engineer with specialization in the field of welding technology, non-destructive inspection techniques & product analysis and its development.

I have worked for over 10 years for Schlumberger Oilfield Services. My career with Schlumberger has involved mostly hard rock stimulation, some coal bed methane stimulation, coiled tubing and cementing. I have been involved in the design, execution and management of these areas.

Experienced (~10 years) specialist in electronics and IT / former army officer. Languages: German, English, Basics in French and Spain Skills: PLC, instrumentation, electronics, computers

Onshore pipeline(above ground/ buried)and Plant piping engineering and design. Stress analysis-using CAESAR-II, for static, dynamic, wind, earthquake, flange leakage, Slug, and Water Hammer analysis. Familiar with concerned codes viz.ASME,API,WRC,etc.

PRESENTLY WORKING AS VICE PRESIDENT - TECHNICAL WITH M/S.AEGIS LOGISTICS LTD.MUMBAI,INDIA

My present Job as well as the work I did for Santa Rosa w/ the Syzemograph will be what pertains to the oil & gas Industry

Work Experience of 7 years - presently working with GE Capital Intl Services in India (From past 5 years). Presently working as Asst Manager

static equipment, storage tanks, API650, pressure vessels, ASME, fluent English, good German, MSc, Bsc, petrochemical, oil

I am responsible for all instrumentation, maintenance modification, and repairs for plant machinery and furnace maintenance. I have strong supervisory experience in a petrochemical plant. My experience also includes extensive electrical/HVAC knowledge.

A Professional and Versatile QA/QC and Inspection Engineer with 10 years effective hands on experience in QA/QC ,NDT and Welding inspection,

Production Geologist - Onshore Texas and Mid-Continent. Strong background in operations, log analysis and correlation, seismic interpretation and computer mapping, prospect evaluation, and well planning. Extensive background in fractured carbonates and horizontal drilling operations.

Graduate Mechanical Engineer with I firm foundation in power generation, mechanical-thermal design, solid modelling, heat transfer, CFD, thermodynamics, project management and manufacturing experience.

Position as Contracts Administrator using 10 years of experience as oil and gas industry contract consultant and contract compliance auditor.

DRILLING ENGINEER: Experience in drilling design engineering in horizontal, directional and verticals wells. Specialist in horizontal drilling, SAGD well drilling projects, trajectory well design, casing design, bit selection and drilling softwares. experience in drilling project planning.

A self confident, motivated and energetic person, able to cope with rapid change in corporate culture, strong technical analysis, management and computer skill, able to work under pressure, willing to learn.

Seven years experience.

Russian speaking geologist with an MBA in finance seeking position with an international oil and gas exploration company in corporate planning, project management or finance.

I am an international business transaction professional, with five years experience specializing in the rail transportation and oil industries. I am currently an MBA student specializing in international business.

As an active electrical designer within radar, sonar and instrumentation for ten years, Fabian has a unique experience with respect to product design and manufacturing efforts. His work within an ISO9000 system has produced solid craftsmanship, with due to diligence to Quality Control.

Engineer, 10 Years experienced, Construction management of industrial projects

I have Worked has Process Control Room & Field Operator in Indian Organic Chemicals Limited, Chennai, India for 14 years and has Control Room and Field Operator Oman Chemical Industries Limited (S.A.O.G), Oman for 2 years

Over 15 years experience of Project Management and Specialist Engineering on numerous project task forces in the oil refining and gas processing industry.

More than 15 years of Oilfield experience and Drilling Services with Schlumberger. worked in many countries in different positions starting from Engineer Trainee to Staff Engineer, Rig Manager, Operations Manager and now (SDS) QHSE Manager worldwide.

I have over 10 years of experience as a Rotating Machinery / Reliability Engineer in various industries. I am looking for a full time or contract position overseas as a rotating machinery engineer.

Fully experienced manager/agent within the water/utilities industry

Excellent Safety Record. Excellent Communication Skills. Exemplary Drilling Record. Over 16 years of supervisory experience of oilfield personnel & operations.

as incharge operator at catalyst production unit and process operator at the ammonia plant Experience in units- : kneaders,extruders calciners,heaters,Turbines, Centrifugal compressors, Boilers, Super heaters, Reformers, MEA& HPC Systems

Eighteen years Electrical experience in the Offshore, Petrochemical, Power Generation, and Natural Gas Processing industries. Project Manager, Hook-Up & Commissioning, Supervisor of E & I Design staff and E & I contractors on projects. Budgeting and Procurement experience.

11+ years of experience in Procurement, Materials, Inspection & Expediting positions

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 [ 118 ] 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out