Resume - Piping Engineer, Mechanical

Misco Jobs

Resume #42402

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS
General Secondary Certificate 1994 - 1995 Amman, Jordan, Rating 95%.

B.Sc. Degree in Mechanical Engineering
Rating: Good
1995 - 2000 University of Jordan, Faculty of Engineering and Technology.

Member at JORDAN ENGINEERS ASSOCIATION NO 03/11517

British Gas Grade3 Painting Inspector.

Institute of Corrosion (ICORR) Grade2 Insulation Inspector.

Institute of Corrosion (ICORR) Grade2 Fire-Proofing Inspector.

TRAINING
I have participated in a full time program of industrial training at the Qatar Liquefied Gas Co. Ltd. plant at Ras Laffan from 20.6.99 to 23.8.99 in support of fifth year academic studies at the University of Jordan, Faculty of Engineering & Technology.

During this training program, I have received supervised practical training exposures as follows:
Week 1: H2S/BA Training
Plant Safety Induction
Qatar Gas Plant Overview
Week 2-4: Maintenance Workshops
Week 5-7: Utilities area.
Week 7-9: Gas trains.

EXPERIENCE HISTORY
Employer: Consolidated Contractors International Company C.C.I.C
Position: Mechanical Engineer (Piping / Equipment).
Direct client: Chiyoda, Technip (CTJV)
Client: QATAR GAS (QG)
Financed By: Exxon-Mobil, Total Fina Elf.
Location: Ras Laffan Industrial City, Qatar
Period: Aug 2005 till 20-3-2006.

Employer: Consolidated Contractors International Company C.C.I.C
Position: Mechanical Engineer (Piping / Equipment).
Direct client: Chiyoda, Mag, Snam & Associates (CMS&A)
Client: RAS GAS (RG)
Financed By: Exxon-Mobil
Location: Ras Laffan Industrial City, Qatar
Period: Dec 2002 till Aug 2005.

Project Name: Ras Laffan Expansion Project (RLX,QGX), Al-khaleej Gas, Acid Gas Injection.

Project Scope: Construction of Trains 3/4/5 at (RLX) and Trains 4,5 at (QGX) for Gas Processing as an expansion of the existing trains, as well as all the supporting processing facilities such as utilities, new flare system, sea water intake facilities as well as new boil off gas facilities, condensate berth facilities and storage tanks. the project includes also a lot of modifications at the existing facilities to meet the expansion requirements.
The project scope also includes erection of all the types of equipments (valves, pumps, vertical vessels, heat exchangers etc).

Pre Commissioning and Commissioning: executing hydrotesting pneumatic testing, reinstatement, flushing/cleaning, drying, and N2 purging activities. startup of more than 63 systems (steam, mixed refrigerant, cooling water, propane refrigerant etc) as per the MAC ATTACK schedule.

Duties And Responsibilities:
1. Preparation for the project Method Statements/Procedure conforming to the project specification.
2. Preparation for the JSA's (Job Safety Analysis) for all the types of activities conforming to the project Safety Procedures.
3. Allocation of manpower and equipment with the coordination of Project Engineers.
4. Following all on site daily activities.
5. Daily progress reporting for planning department.
6. Liaison with the client representative at site to get the arising problems sorted out.
7. Liaison with the Quality Control Engineers to get the ITP's & QCP's approved.
8. Daily coordination with the QC inspectors.
9. Liaison with the planning engineer to get the project activities schedules approved.
10. Liaison with the material engineer to get the MAR's submitted/approved.
11. Liaison with the engineering department to solve the arising technical problems.
12. Liaison with the cost control department to ensure that the activities are being achieved within the project budget.
13. Liaison with the other engineering disciplines to get all the clashing problems sorted out.

Employer: Black Cat Construction W.L.L
Position: Site Engineer (Piping – Mechanical).
Client: Qatar Petroluem (QP)
Location: Dukhan, Qatar
Period: Dec 2000 up to 24 June 2002.

Project Name: Engineering Procurement Installation and Commissioning Of Dukhan Flare Upgrade Project.

Project Scope: detailed design and engineering, procurement, installation of a new flare system. installation of K.Out Drums and pumps, Blowers' systems and Ignition panels, fabrication and erection of the flare stack, fabrication and erection of piperacks and spools. modifications for the SDV areas. Construction of new emergency Burn-Pits, Catchment Pits and Condensate Drain Pits. pre commissioning and commissioning of the flare upgraded systems.

Pre Commissioning and Commissioning: executing hydrotesting, flushing/cleaning, reinstatement, drying and N2 purging activities. startup of control valves, SDV valves, ignition system and flare system.

Duties And Responsibilities:
1. Preparation for the project Method Statements/Procedure conforming to the project specification.
2. Preparation for the JSA's (Job Safety Analysis) for all the types of activities conforming to the project Safety Procedures.
3. Allocation of manpower and equipment with the coordination of Project Engineers.
4. Following all on site daily activities.
5. Daily progress reporting for planning department.
6. Liaison with the client representative at site to get the arising problems sorted out.
7. Liaison with the Quality Control Engineers to get the ITP's & QCP's approved.
8. Daily coordination with the QC inspectors.
9. Liaison with the planning engineer to get the project activities schedules approved.
10. Liaison with the material engineer to get the MAR's submitted/approved.
11. Liaison with the engineering department to solve the arising technical problems.
12. Liaison with the other engineering disciplines to get all the clashing problems sorted out.

Employer: Black Cat Construction W.L.L
Position: Work Shop Engineer.
Client: Qatar Petroluem (QP)
Location: Dukhan, Qatar
Period: Sep 2000 up to Dec 2000.

Project Name: Modification Works For AGRU/SRU for NGL 1 & 3 To Meet The Expansion Of NGL 4.

Project Scope: - Fabrication and Erection of Cement Lined Pipes From/To heat exchangers.
- Fabrication and Erection of GRE pipes and heavy shedule pips.
- Fabrication and Erection of copper/nikkle spools for instruments.
- Modification of the existing pipe racks, fabrication and erection of pipe spools and structural supports.

Pre Commissioning and Commissioning: executing hydrotesting, flushing/cleaning, reinstatement, drying and N2 purging activities.

Employer: Black Cat Construction W.L.L
Position: As Builter Using Autocad R14, R2000.
Client: Qatar Petroluem (QP)
Location: Dukhan, Qatar
Period: Sep 2000 up to Dec 2000.

Project Name: Construction Of 6" Khuff Gas Feed Buried Pipeline To DPS.

Project Scope: detailed design and engineering, procurement, installation of a new 6" Khuff gas line (under-ground), fabrication of Pig launcher/reciever skids. erection of the pig launcher and receiver. pigging (soft + abrasive). Installing the cathodic protection systems hydroteting and Air flushing.

Pre Commissioning and Commissioning: executing hydrotesting, flushing/cleaning, reinstatement, drying and N2 purging activities.

Duties And Responsibilities:
As building all the isometrics as per the latest on situ conditions using Autocad.

LANGUAGES
Arabic: Mother tongue
English: Fluent.

SPECIAL SOFTWARE
As a result of my training period at QatarGas in the ITR rooms of the TRAINS and the UTILITIES AREA, I feeled the need to investigate the Natural Frequency of Rotors with multi-span conditions (Free Vibration), this is why I Programmed a software to investigate the mode shapes and the natural frequencies of rotors for the Classical and Non Classical conditions.

Modelling The Mode Shapes Of The Free Vibration Of Rotors For The Gas Turbines And Compressors For Classical And Non Classical Boundary Conditions

Graduation Project:
Graduation Project: Jan. 2000
Title: The Kinematics and Dynamics for Robots
Subject: Kinematic & Dynamic Analysis Field
Class: Industry Applications
Technology: Inverse Kinematics for Multibody Linkage
Systems
Programming Language: Fortran
Sponsored by: University of Jordan.

INTERESTING FIELDS:
* Rotating unbalance problems for rotors, and modeling the mode shapes of vibration of the shafts & couplings using the FEM (finite element method) for all the types of motors, pumps, turbines and compressors.

* Effect of vibrations on bearings, seals, and other shaft elements.

* Life estimation of bearings and shafts before failure, by computing the cyclic stresses.

* Heat transfer through the solid materials and the isolations.

* Power plants and refrigeration cycles.

* The Kinematic and dynamic analysis for closed loop machines (Mechanisms), and open loop machine (Robots).

* Vibrational problems of reciprocating machines.

* Applying the dynamic equations to eliminate the shaking forces and bending moments for reciprocating machines, and mechanical mechanisms.

* Numerical methods for solving the (Linear -Non Linear-differential-and Partial Systems of equations.

TRAINING COURSES:
AutoCAD R12,14,2000
2 Months
Summer 1995
University of Jordan

3DS4
2 Months
Summer 1996
University of Jordan

Programming in Fortran Language
2 Months
Fall 1996
University of Jordan

MATLAB-5, Excel, Word, Windows

Special University Courses
Special courses taken as part of the university requirements

Finite element
3 CH
Fall 1999
Dr.Nasir Huniti

CAD
(Computer Aided Design)
3 CH
Fall 2000
En.Ahmed Sakhrieh

HOBBIES
* Body Building
* Reading
* Swimming.

References
Upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6351 to 6400 of 10849)

Go to Search Parameters...

Brief Description

experienced in oil refinery operations,tank farm

Analytical mind and Strong numerical skills

Mechanical Engineer with eight years experience in constuction and maintenance field, Currently Maintenace Engineer in Oil and Gas field. AWS certified Welding Inspector

5 years experience as a Mechanical Design Engineer includes project management, generating modeling using Pro-Engineer and determining stress analysis using finite analysis software Ansys 8.0, geometric modeling in Gambit to solve flow and heat transfer problems in Fluent 6.1 and energy-efficient HV

Qualified physician in oil fiel, long experiense in emergencies in remote areas and medevacs by road and by plane, good experience in safety and health risk assesment.

HSE SUPERVISOR AND MAINTENANCE PERSONNEL

I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.

Qualification: Diploma in Petrochemical Technology Professional Experience: Having11 years experience in Field cum DCS Panel operations in routine operations, start ups, trouble shootings, scheduled & emergency shut down operations of following petrochemical plants. Manufacture of Ammonia: Naphth

Mechanical/piping design experience with knowledge of several CADD tools and computed based softwares use in this field.

I am an experienced research chemist specializing in analytical chemistry using chromatographic instrumentation for the analysis of petorleum, environmental and food samples

Energy conservation, energy audit

Skilled Engineering Project Manager for multidisciplinary EPCM services for the oil and gas industry, accountable for maintaining good client relations and satisfaction. Positions accountable for safety in design, time and cost/benefit management.

To obtain a Full Time Chemical Engineering, Chemist or Quality Control position starting from February 1, 2003.

An innovative and intelligent Electronic Engineering Graduate who is hardworking, self-motivated and responsible. An articulate and outgoing personality that remains confident and good-humored under pressure especially when meeting tight deadlines set by the oil industry.

My belief, in order to create a safe orientated working environment, the understanding of safe, danger and personnel safety must be mindset into every staff in the organization.

I AM INTERESTED FOR WORK IN OIL AND GAS INDUSTRY-TEAM WORKER-

My carrer have been linked completely to the Oil Industry and particularly to the Refinery area. During my experience in the Oil Industry I have had the opportunity to go through the different Engineering areas, always linked to the project execution.

Skilled rig hand. 15years experience. Worked drilling and production rigs.

I graduated Faculty of Wells Drilling & Exploiting of Oil and Gas Reservoirs, within Oil and Gas Institute from Ploiesti

I am interested in work overseas. 15 years mechanical engineering experience in India, Malaysia, and Middle East

Began career as a Field Services Technician working in the Middle East during mid 80’s, and have progressively been promoted to various operations management positions, including Sales Manager, Assistant Operations Manager, Field Safety Manager, Sales Consultant, and Regional Manager.

NINE (9) YEARS EXPERIENCES IN OIL AND GAS ENGINEERING DESIGN AND PROJECT MANAGEMENT CONSULTANCY SERVICES WITH 18 MONTHS IN THE UK

Technical Sales Professional with proven track record in new product introductions and new customer development along with technical support in Lubricants/Chemical business. A strong team player with active learning orientation, high energy, enthusiasm and result orientation.

To seek and strive for a distinguished position in Project Management (Construction) and Project Planning (Plants & pipeline/process piping) and to contribute the overall success of a progressive company by employing the best of my potentials, skills and attitudes earned in profession.

I am a recent graduate in Mechanical Engineering from the University of Washington.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Fifteen years of oil field related experience, Ten years offshore, has developed the following core competencies; Communication with varied and dynamic teams throughout the industry. Proven planning and prioritizing ability on both steady state and commissioning projects.

Surveyor

Network/System Engineer/Administrator with 4.5 yrs of experience primarily in the integration and implementation of internetworks and managing the system support team.Designed routed WAN and switched/shared LAN based on Cisco Products.

I am currently employed as an A grade electrician working for a large Data and Electrical company. I am actively seeking a busy hands position in the mining industry.

I have about 15 years of experience in operation of various Chemical plants, oil refineries and oil and gas gathering stations in India and Gulf Onshore and Offshore.

I am graduated Middle East Tecnical University as a Petroleum Engineer in 1995 and started to work in the industry in the same year. My professional bacground has covered reservoir engineering, production engineering, workover & completion engineering in Azerbaijan, Kazakhstan, Houston and Turkey.

Well organised and reliable Geoengineering professional with excellent presentation and interpersonal skills. Experience of various hardware and software.

SKILLS: M.S chemical engineering with strong background in process design, process integration, simulation skills and successful industrial experience.

Petroleum and natural gas engineering, BSc Earthsciences, MS Candidate

A challenging position effectively utilizing my skills in research, indexing, information technology, and electronic publishing in the petroleum industry.

Hard worker.

Materials Management Specialist - Offshore

Finishing my MS degree in geology and am looking for a career. I am willing to travel and/or relocate. I can legally work in the US, Canada, and Europe (UK citizen).

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

BSc Degree in Environmental Engineering, excellent leadership and communicative skills, excellent monitoring, auditing, evaluation and reporting skills, ability to operate as a member of a multi-disciplinary and multi-cultural team, NEBOSH and ISO 14001 Lead Auditor Qualifications.

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

To become an asset for your organization and to contribute to the quality and growth objectives of my workplace, in the process the endeavor will be to combine. My creative and professional skill.

Senior drilling and completions engineer with 3 years of experience with major oil company, land rig operations for vertical, deviated and horizontal wells with single and single selective completion type.

Sales and Operations manager highly business oriented and objective driven

Piping Engineer, Mechanical

Now, Gen. Mgr. - Projects EPC Contractor at Kazakhstan

Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

Proven analytical skills, ability to work under pressure, quick learner adaptable, self- initiative, good listener, experience in office-based practice, communication skills, programming Skills, hard working and posses knowledge.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 [ 128 ] 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out