Resume - International Field Experience (USA, Aberdeen UK, Dubai, Brunei) with Baker Atla...

Misco Jobs

Resume #4247

CONTACT INFORMATION:
View contact information...

International Experience: UK (Aberdeen), U.S.A., Dubai, Brunei
Marital Status: Married
Nationality: South African
Membership: SPE Student Chapter

2. Tertiary Qualifications
Curtin University Of Technology – Australia
Current Degree: Master In Petroleum Engineering (MPetEng)
Expected completion date: Mid January 2004

1. Applied Geology and Geophysics - The unit addresses the fundamental concepts of the earth in terms of petroleum occurrence, exploration and recovery.
2. Drilling Engineering - Drilling operations in depth, types of rigs used, the design of mud programmes, the design and selection of tubulars, the selection of bits, and rock mechanics, horizontal and multilateral well technology, and the modern tools used for changing drilling directions and the recording of subsurface data while drilling.
3. Fundamentals of Reservoir Engineering - The principles of fluid flow in porous media, rock, fluid behaviour, material balance techniques, the estimation of connate water and residual hydrocarbon saturations, and initial hydrocarbon in place estimation.
4. Hydrocarbon Phase Behaviour - Equation of state, use laboratory fluid data for the estimation of hydrocarbon volumes and to model the changes caused by reservoir pressure depletion while a field is being produced.

5. Formation Evaluation - Grounding in rock and fluid properties and the use of special core analyses. The techniques for up scaling data from a micro core plug to a macro reservoir simulation model. Use of modern well logs, fluid sampling and formation pressure measurement tools, and in the interpretation the types of fluids present in the formation, their respective saturations and rock properties.
6. Advanced Reservoir Engineering - Basic well testing and analysis techniques, the behaviour of aquifers during production, material balance in hydrocarbon reservoirs and immiscible and miscible displacement of hydrocarbons. Secondary production methods and processes. Estimation of recoverable hydrocarbons, design of secondary recovery methods, evaluation and forecasting of reservoir
7. Production Technology - Technology of well completion, stimulation techniques, inflow performance assessment and production enhancement.
8. Reservoir Management - This is an advanced level course that trains the student on how to utilise all the knowledge gained from the seven core units when carrying out a full field reservoir study. The unit emphasises the need for a commercial focus when performing reservoir evaluations and making investment proposals.
9. Numerical Reservoir Simulation – Simulation techniques and their applications with commercially available software like Eclipse (Reservoir Simulation)
10. Reservoir Characterisation - 3D geological modelling using RMS software. Upscale microscopic level field rock data and well test information to a full field reservoir simulation model in the macroscopic scale.
11. Field Performance Evaluation & Simulation Project - Determining appropriate level of skin damage for various sand control completion options based on historical field data, and develop understanding of the mechanisms for damage and the most appropriate methods to model these mechanisms using appropriate industry software.

http://petroleum.curtin.edu.au/contents/courses_structure.html

Potchefstroom University – South Africa

Degree Completed (1996): B.Sc.
Subjects: Physics
Chemistry
Statistics
Anatomy
Human Movement Sciences
Physiology
Sport Sciences

Tertiary Achievements: Academic Class Representative
Rugby, U/19-U/21 University & Provincial level

3. Secondary Educational Qualifications
Secondary School: Silverton High School, South Africa (1989-1993)

4. Relevant Training – Oil & Gas Industry
Certificates

1. RGIT survival, 1997 – Aberdeen, U.K.
2. BSP Offshore survival course, 2001 - Brunei
3. Reservoir Performance Monitoring, 2002 – Texas, Grand Prairie
4. Production Logging Analysis, 1999 – Aberdeen, U.K.
5. Eclipse Cased Hole School, 1998 – Montrose, U.K.
6. Completion Engineer, 1998 – Aberdeen, U.K.
7. Safe Hoisting Course, 1998 – Montrose, U.K.
8. Perforating Procedures, 1998 - Montrose, U.K.
9. Operation Of Pressure Equipment, 1998 - Montrose, U.K.
10. STOP Training, 1997 - Aberdeen, U.K.
11. C.O.S.H.H., 1997 - Aberdeen, U.K.
12. NRPB, Radiological Protection Course, 1997 - Aberdeen, U.K.
13. Permit to work 1997-2001 – Shell, BP, Chevron, Phillips

5. Employment Record

1. Baker Atlas, Brunei Darussalam April 2001 – February 2003

2. Baker Atlas, Aberdeen, UK Nov. 1997 – May 1999

Position - Cased Hole Wireline Logging Engineer

Experience in the following services

* Perforation, 1 11/16" to 7" guns
* Acoustic Cement Bonding Tools.
* Production logging
* Pulse neuron tools and C/O logging
* Tubing Punches and Back-offs
* Cutting of tubing with Chemical Cutter or Severing Tool.
* Setting of Plugs and running of Cement Bump Bailers.
* Gyro orientation for setting of Whipstock and Bit orientation.
* Installation and operation of 10K Pressure control equipment on oil and gas wells.

Other responsibilities and Personal skills
* Responsible for all aspects of the logging operation whether on land rigs or floating and fixed offshore installations.
* Liaison with Drilling Service Coordinator, attend daily meetings and involved in problem solving meetings.
* Submit full inventory of service company personnel, equipment and materials to Drilling Service Coordinator.
* Supply Drilling Service Coordinator with a record of services conducted and a time breakdown of events.
* Prepared and organise transport documents and equipment to and from rigs.
* Unique experience in unman, rig less operation, which involved redesigning of all the logging units and additional equipment to be below 2 tons.
* In charge of mobilization of all equipment and personnel by boat and helicopter to and from unman rigs.
* Strong knowledge of completions and workover operations.
* Apart form my day to day responsibilities, I was involved in setting up the new operational base in Brunei and trained new engineers and operators.
* Responsible for the safety of personnel and equipment, ensures subordinates are fully familiar with safety equipment and procedures, and that safety rules are strictly adhered to.
* Excellent presentation skills and team player
* Creative in identifying potential completion problems and in proposing appropriate solutions.

3. June 1999 – November 1999
Scientific Drilling Controls, Dubai U.A.E

Position - Wireline Logging Engineer

Services

* Memory Production Logging and
* Gyro Surveying
* Drill bit and Whipstock orientation

Other

I was the first engineer in SDC that was performing both gyro surveying and production logging operations.

3. December 1999 – March 2001
PRETORIA, SOUTH AFRICA
Pursued private business interests

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6301 to 6350 of 10917)

Go to Search Parameters...

Brief Description

I am organized and detail-oriented, work well under pressure and deadlines, enjoy working with a variety of people. I also have a great attitude and enjoy working in a creative, challenging and growth-oriented working environment.

Dear sir Service engineer in Yemen. I have good knowledge about electrical systems and I have 6 years experience in Electrical power plants field, I hope I can perform best of my knowledge if I get opportunity in your esteemed organisation.

experienced professional in corrosion seeking job opportunities world wide.

Worked on a variety of projects as a process engineer in Europe, Australia and the Middle East. Assumed roles of project engineer, lead process engineer and process technical focal point for operations during career. Use of the process simulations Hysis, Hysim, Proii and PIPESIM.

15 years of experience in QA/QC, Welding Inspection, Piping systems, Pipelines, NDT & Plant Inspection with a valid certificates of CSWIP Plant Inspector, CSWIP 3.2, AWS CWI, ASNT Level II in RT, UT & MT. Computer literate with UAE Driving Licence.

15 Years of HSE experience in oil & gas field.

British MSci petroleum geology 1998-2002

I have fifteen(15) years of experience in the oil industry as floor hand and lately as warehouseman, I have worked in offshore operations and inland operations.

I have 15 years experience in metrology & instrumentation in calibration laboratory, pharmaceutical company & petroleum company.

BRIEF OVERVIEW •Accomplished Mechanical Engineer Involved in designing, engineering, execution, quality control, construction and implementation of ISO-9001 processes in the field of refineries, petrochemicals, chemicals, material handling and offshore projects for over 9 Years.

Summary of Experience: Eight Years in total on the following activities. Welding, painting and Lifting Inspection.

First Line Supervisor (driller), Compliance Officer (certified construction officer), 5 years Post Secondary Education including Business & Finance Diploma

Experience welder and heavy equipment mechanic

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

Geophysicist

Contract design, award and management, procurement plans, purchasing, invoice payments and cost control, contract administration

I have bachelors in mechanical Engineering and Masters in Petroleum Engineering.I have working Experience in Pipe line and EPC Companies

Well Service Supervisor or Coil Tubing Supervisor

Miantenance Engines and pumps - Computers skills

I have Diploma in Instrumentation & Control. I working in same field last 8years I have all certificate which fulfill your all requirements. To work with a progressive, professionally managed organization in competitive and rewarding environment. I have equipped myself conceptually and practically

Degree from "College for chemical technologies".

Safety Engineer with Refinery Experience 6 yrs

Solid organizing and planning skills

B.E telecom engineer.

Excellent Communicator • Bilingual - Spanish • Procurement/Logistics

I have 2 years’ experience within the Upstream oil and gas industry. This has afforded me the opportunity to develop a good knowledge and understanding, of a Production background. I have recently gained a NVQ level 3 in Process operations and would like the opportunity to enhance my experience.

Experienced Terminal Operator and Supervisor in the Petrochemical field with an excellent safety record and multiple Oil Industry related skills. Very Health and Safety orientated with a high regard for HSE Regulations and a NEBOSH Qualification in Occupational Health and Safety

I like work.

I know how to organize my activity

Awarded 'Best supply chain personnel' from the Minister of Electricity. Reduced inventory value and lead time by identifying cost saving /part standardization initiatives, purchase avoidance, centralized purchase and standard localized supply .

I AM HIGHLY MOTIVATED & ADAPTABLE MATERIALS/ LOGISTICS SPECIALIST: with over 20 years professional operations experience in all aspects of Materials & Logistics, Exports/Imports administration, MMaterials Co-ordination Expediting, Inspection, Inventory Control, Warehousing, & Supply Chain Managemen

Contracts Manager; Procurement Manager; Subcontracts Administrator; Contract Administrator; EPC oil & gas downstream construction.

A proven Welder highly skilled in the areas of aluminum, ferrous and non-ferrous (CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.

Monitoring production and running diagnostics on well performance, maintaining flow lines, scheduling and supervising wireline/swabbing programs, optimizing plunger lift systems, monitor pressure and flow readings, identify any safety or environmental issues.

Experienced Assistant Driller with 5 + years drilling in Wyoming for Nabors Drilling.

Estimation and Costing,variationsnad claims,Monthly Progressive Bill preparations

I have been a Mechanic now for 5 years and worked offshore as a rig mechanic for 2 years.

DOCUMENT CONTROLLER

fit pipe fallowing by blue prints and weld pipe whith tig,mig,stick and flux core

Senior Electronics Technician

3+ years of experience in Electrical Design of Commercial and Process Industries with fair knowledge of ETAP.

A Certified Human Resources Professional with practical and progressive experiencein Africa, Central America, Canada, USA, Central Asia and the Asia-Pacific region.

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

Documents Control, Project Documents Control, Administration Assitant, Secretary

i can analys the hazard working conditon by using Job Safety Analysis, Risk Assessment and Hazard identification, implementing the safety policy in a good bahavioral way that people can follow the safety rules, im a good trainer in safety firefigthing, first aid, handling ang lifting procedure

I am a degree qualified Instrumentation and Control engineer / technician. I am looking for contract work in the oil and gas industry and I have offshore experience. I have full medical and am OPITO BOSIET certified. I am willing to relocate worldwide and will consider any shift rotation.

To obtain an exciting and challenging career as a Geological Engineering Technologist in the Oil and Gas Industry so that my past experiences and training can grow.

International Field Experience (USA, Aberdeen UK, Dubai, Brunei) with Baker Atlas as a Wireline Logging Engineer, Masters Degree in Petroleum Engineering, B.Sc Undergraduate degree. Currently in Perth, Australia and willing to relocate OR work on rotational basis

5 years of full-time experience in Refinery, Chemicals. An Engineer with MBA.

Diploma In Mechanical Engg. with 6 Yrs exp in Piping Designer

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 [ 127 ] 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out