Resume - With seventeen years work experience in oil and gas industry in construction, co...

Misco Jobs

Resume #43206

CONTACT INFORMATION:
View contact information...

POSITION APPLIED FOR:
Instrument Technician (first choice)
Instrument Fitter (second choice)

EDUCATIONAL ATTAINMENT
Year School Course

1971 - 1976 San Vicente Elem. School Primary Education
1976 - 1980 San Vicente Parochial School Secondary Education
1982 - 1983 Samson Institute of Technology Refrigeration and Air Conditioning

INDUSTRIAL TRAINING COURSES
* Instrumentation and Control Certification Review
* Basic Fire Fighting and Sea Survival
* H2S Awareness
* Permit Holder/Applicant
* Job Hazard Analysis (JHA)
* Total Process Reliability (TPR)
* Root Cause Analysis (RCA)
* Basic Offshore Safety Induction and Emergency Training (BOSIET)
* Helicopter Underwater Escape Training (HUET)

CERTIFICATION
Certified Instrumentation and Control Engineer No. 0350 by Philippine Instrumentation and
Control Society.

QUALIFICATION HIGHLIGHTS
With seventeen years work experience in Oil and Gas instrumentation distinctively for maintenance,
Construction and commissioning of Gas Fractionation Plant, Oil Refinery, Oil Gathering Station and (FPSO) Floating Production Station and Offloading Facilities.

WORK EXPERIENCES
Work Location: Shell Nigeria Bonga FPSO (Offshore commissioning)
Nature of Business: Oil and Gas Production
Position: Instrument Technician (Pacific Ocean Manning Inc. / V- Offshore UK)
Period Covered: July 4, 2005 to October 1, 2005
Job Description:

* Involve in fire and gas loops functional testing of Solar Gas turbine water mist system and its associated shut down loops.
* Carried out wet testing of deluge system of every fire zones, test done based on cause and effect diagram by simulating confirmed fire detection signals to its associated fire and gas detectors/sensors and make sure that foam and water control valves are on correct position.
* Calibration and alignment of line of sight open path gas detector.
* Performed Pre Commissioning Procedure (PCP) Test of Fire and Gas loops.
* Carried out stainless steel tubing job for transmitter impulse lines, control valve pneumatic line, instrument air lines and others high pressure hydraulic lines and steam tracing line.

Work Location: Petroleum Development of Oman (Marmul site)
Nature of Business: OIL and Gas Separation and Production
Position: Instrument Technician (Sponsored by IPEDEX / AMEC)
Period Covered: December 10, 2000 to April 3, 2005
Job Description:

* Check and rectify trips and communication failure of different types of oil wells having beam pump, progressive cavity pump (PCP) and electrical submersible pump (ESP) Also check wells for correct discharge pressure trip point and well production analysis.

* Coordinates with local contractor for smooth implementation of awarded project and to ensure that everything conforms to client's standard and requirements.

* Check and rectify malfunction of vital equipment in oil production station which includes, three phases separator used as bulk or test. For test separator it is our responsibility to ensure the correct test result of each in every well under test using multiphase meter, ultrasonic interface level transmitter and positive displacement meter. Also involve in corrective and preventive maintenance of Hydro cyclone sand separation skid, Borsig reciprocating gas compressor and Shipping pump.

* Prepare all drawings and materials required for shut down and liaise with operation department before and during shut down to avoid any process disturbances and plant upset.

* Responsible for any stainless steel tubing job required for steam tracing, high pressure hydraulic line, instrument impulse line and other instrument fitting job.

Work Location: Occidental Petroleum of Oman (Safah Oil Field)
Nature of Business: Oil and Gas Separation and Production Plant
Position: Instrument Technician (Sponsored by IPEDEX / AMEC)
Period Covered: November 20, 1999 to December 18, 2000
Job Description:

* Review process flow diagram (PFD) piping and instrument drawing (P&ID) and logic diagram of new projects and recommend solution to any defects and upgrade documentations.
* Assist local contractor for commissioning and start up of completed equipment so as not to interrupt and avoid plant shut down during start up.

* Trouble shooting and rectifying vital equipment like 16-cylinders reciprocating Superior engine driven three stages gas compressors having altronic control circuit; 2-stages Solar Gas Turbine driven compressors; and 12-cylinders Waukesha and Caterpillar engines.

* Involved in Process Instrumentation, mainly for corrective maintenance and attending night call out duty for Instrument failures in Crude Distillation Tower, Crude and Diesel Heater, Oil Gas and Water Separator and Desolater.

* Involved in the ongoing DCS and PLC Control upgrading project to ensure all completed instrument loops are properly documented and operating as per process requirement.

Work Location: Unocal Pailin Offshore Gas Field, Thailand
Nature of Business: Oil and Gas Exploration and Production
Position: Instrument Technician (Sponsored by P. T. McDermott)
Period Covered: June 1998 to December 7, 1998
Job Description:

- Hook up and commissioning of Offshore Gas Production Platform
- Loop testing of serial link between equipment control panel and DCS.
- Performed functional checks of all instrument loops associated with propane compressor and CO2 removal skid.

Work Location: Total Bangkok Offshore Oil Field, Thailand
Nature of Business: Oil and Gas Exploration and Production
Position: Instrument Technician (Sponsored by IPEDEX Thailand)
Period Covered: April 8, 1998 to May 7, 1998
Job Description:

- Overhauling, calibration and loop checking of all instruments at WP-8 well head platform.
- Type of instruments maintained includes high pressure ITT Barton Recorders, Valtek and Fisher Control Valve, Masoneilan Level Trol and Controller

Work Location: Formosa Petrochemical Corporation, Taiwan
Nature of Business: Petrochemical Construction Project
Position: Instrumentation Foreman – June 25, 1997 to September 1, 1997
Instrument Supervisor – September 1, 1997 to January 27, 1998
(Sponsored by Samsung Engineering & Construction Co.)

Job Description:
* Supervised and demonstrate to all instrument fitter the correct way of bending stainless steel tube, proper usage of fittings and proper slope based on process requirement.
- Supervised the correct installation, location and specification of all instruments and vital equipments for correct functionality as per client's standard.
- Conduct safety meeting on a regular basis for all workers under my supervision for safe completion of project and make sure that everybody doing job safely.
- Checked and rectified any defect on instrument drawings such as instrument data sheet, piping and instrument diagram, instrument hook up drawing and instrument loop diagram.
- Coordinates with other department head that may be affected on implementation of instrumentation job and recommend acceptable solution to concerned department.

Work Location: Abu Dhabi Gas Industries GASCO, U. A. E.
Nature of Business: Natural Gas Liquid Fractionation Plant
Position: Instrument Technician (Sponsored by Euro Mechanical and Electrical Contractor)
Period Covered: May 8, 1990 to December 20 1995
Job Description:

- Carried out routine preventive maintenance on all instrument loops as per Preventive Maintenance Schedule.
- Involved in trouble shooting and rectifying erratic process parameter indications.
- Worked on vital equipment such as Rolls Royce and General Electric engine-driven gas compressors having Netcom 5000 Digital Control and Speedtronic Control Circuit.
- Functional testing of shut down loops associated with de-etherizers, de-botanizers, and de-propanizer12-passes furnaces.
- Attending night call out duty for malfunction of propane treater fractionation column, and feed surge drum.
- Carried out stainless steel tube bending and other related instrument fitting job that may be required for improvement of process measurement and control.

Work Location: KNPC Mina Ahmadi Oil Refinery, Kuwait
Nature of Business: Oil Refinery
Position: Instrument Technician (Sponsored by Kellogg Plant Services Inc)
Period Covered: January 1989 to March 1990
Job Description:

- Worked in Eocene and Bitumen Plant.
- Trouble shooting and rectifying abnormal level indication of Glycol-filled D. P. Type level transmitters.
- Field calibration of interface displacer type Masoneilan level transmitters.
- Calibration and stroke checking of split-range operated control valves.
- Functional testing of heater cascade control loop and its shut down system.

Work Location: KNPC Mina Abdullah Oil Refinery, Kuwait
Nature of Business: Oil Refinery
Position: Instrument Technician (Sponsored by Braun Transworld Corporation)
Period Covered: August 27, 1986 to August 13, 1988
Job Description:

- Involved in the construction and commissioning job.
- Instrument installation and bending of stainless steel tubing for transmitter impulse lines and air supply lines.
- Carried out calibration and functional check.
- Worked in Valve Repair Shop, mainly in overhauling, calibration and passing test of different types of control valves such as Orbit, Valtek, Fisher and Masoneillan.

Work Location: United Coconut Chemical, Batangas, Philippines
Position: Instrument Fitter
Company: Atlantic Gulf and Pacific (AG&P)
Period Covered: April 1984 to April 1986
Job Description:

- Performed bending of stainless steel tubing (with 6 mm. 10 mm, and 12 mm. OD.) to be used for transmitter impulse lines.
- Layout and installation of carbon steel small bore piping instrument air lines from instrument air header to instrument tapping point.
- Instrument loop check from field mounted instrument to main control room.

REFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2351 to 2400 of 9785)

Go to Search Parameters...

Brief Description

Petroleum Economist

I'm Looking for a work as skilled Mechanic-Rig Mechanic internationally, offshore/onshore rig. I have been working on shore as Technician for over seventeen years as supervisor, group chief in different companies. Consequence of skills, flexibility, ability to learn.

Experienced Petroleum Geologist especially focus and skilled Exploration and operational Geology. Graduated from National University of Singapore recently majored in Project Management, and possess M.Sc degree in Petroleum Geoscience from University of Brunei in year 2000 September.

Sn Oil&Gas Process/Project Engineer

PURCHASE DOCUMENTATION ,MANAGEMENT OF STORES, REQUISITION ,BILLING,PURCHASE ORDERS

Head of Urea operation. Graduate in Chemical Engineering with more than 7 years of experience of Ammonia and Urea plant operation. Well aware of safety systems (OSHA standadrs for Production deptt.).

Control Room Operator with Unlimited Steam Engineer License from City of Los Angeles, CA

Experienced piping design engineer with extensive background in piping engineering, involve in design of piping system and pipe support of petrochemical refineries, pharmaceutical plants, offshore platforms and power plants using CADworx plant Professional, PDS, PDMS, Microstation and AUTOCADD. Able

Control systems engineer with 8 years background in the oil@gas industry

experienced in processing seismic data, land/marine, onshore/offshore, 2D/3D, QC/QA analysis, strong in first break picking, velocity analysis, multiple attenuation, promax, green moutain, mesa softwares.

Instrument Design Engineer

CAREER OBJECTIVE I desire to build on my experience and training in project management, market research and business development in a progressive career opportunity with a company in the energy industry.

I am currently seeking an overseas position in the petrochemical industry. I am focusing on China, S.E. Asia, Australia, New Zealand, Mexico and S. America. I have 17 years of experience managing the design and construction of capital projects in the petrochemical industry.

SUMMARY 95 - Present Varied positions See detailed CV Exxon Mobil Transfield Worley JV (TW JV) Halliburton TW JV Brown & Root (Thailand) Kavaerner Norway AOC North Sea United Construction Woodside Aust

High Qualification of Welding Safety Construction School More than 20 Years experiences, working in different areas Seaman Documentation AVAILABLE IMMEDIETELY TO WORK ANY WHERE.

Responsible for IS support and planning for Field and Focus group disaster recovery, network and PC problems, software and hardware upgrades, instruction and training, implementation and programming.

I have 35 plus years in the oil and gas industry Drilling/workover/production I am at present working in Irian Jaya but looking for a different location with a set rotation schedule such as 28/28 or 35/35

Oil and Gas Gas processing and NGL recovery On-line optimization of petrochemical plants advanced process control Information Technology

production engineer,14 years experience, any location.

Top- notch problem solver, experienced in marine repairs, marine/port engineering, maritime regulatory body affairs, seeking a managerial position conducting same. Training and background has honed my abilities and proficiency at supervising repairs, new construction/conversions.

Certified Project Management Professional (PMP), MBA with engineering degree, and over 15 years of hands-on diversified project management experiences. Large scale international oil and gas projects worked on include capital projects of up to $4 billion in offshore, upstream, and downstream.

I would like to apply with your company for the position of a Electrician where my 20 plus years of oilfield experience will help you to obtain your company's mission. I have worked successfully in Argentina, Bolivia, Turkmenistan , Ecuador, Congo, and Gabon.

Fortune 500 executive experienced in managing Information Technology for corporate clients across a broad range of industries including telecommunications, financial services, manufacturing and government.

I have extensive experience in project evaluation and execution from conceptual phase to abandonment. Strong background in production operations and production enhancement. Recent work in the area of technology identification. Extensive experience in asset team management in the upstream business.

Seeking employment in the Environmental Industry. I hold Bachelor and Masters degree in Petroleum Engineering and will complete another Masters degree in Hydrogeology by 05/02.

International Logistics

I had worked as an operations/a terminal manager for 8 years respectively for Shell China Limited and Caltex China Limited. I think my working experience and performance may prove myself to be a veteran operations/terminal manager.

Mechanical, maintenance engineer

Chemist, Inorganic, Organometallic, Organic

Interested i n a position where I can utilize my knowledge of drilling systems and equipment , particularly sub sea related engineering. I have good man management skills as well as general managerial abilities.

Work Experience -15 Years well established organization for inspection activities, Project co-ordination Inspection , QA/QC / Welding / Mechanical /Piping /Painting & Pipe lay Barge Deep sea Sub-Marine Pipeline project.

LAN,WAN,Microwave ,Automatic transfar switch,low and high voltage electrical panels

Looking for an exciting job in the field of Engineering where my knowledge and experience in the industry will be best utilized. To seek a challenging position as a QA/QC Inspector (Coating/Painting/Insulation) in a dynamic environment and desires to progress further in the same field and likes to g

Over 20 years in the Finance, Administration and Internal Audit Management

Engineered stimulation and cement jobs and enhanced recovery work. Have training and development certification. Have extensive operations management experience. Have both upstream and midstream experience

MAsters Degree + 6yrs of exp + Sr. Process Engg

Total Year of Experience : 12 Years (Oil & Gas Refinery, Petrochemicals-methanol, ammonia, urea, utility,Ship Loading Arm Jetty, Steam & Gas Power plant.

Exploring opportunities to contribute exceptional strengths in pipeline maintenance, construction and instruction, outstanding expertise in heavy equipment operation, and exemplary talents in steering compliance with Company Policy

I am M.Sc in Chemistry (Equal to Chemical Engineer) getting 2nd position in the University of Sind Jamshoro. I am a Production Tech. with extensive experience in Different companies like Fertilizer, Petrochemical, Oil and Gas. I have 10 years of experience

I have 20 Yrs exp., after Dip. in Mech. engg. & Safety Engineer/Officer have 12 yrs exp., mainly in the field of Oil, Gas, Petrochemical & power plants industries in maintanance, shutdown & construction works in India & Gulf countries.

I am a reservoir simulation engineer with experience in both compositional and black oil. Additional skils include geostatistics, petrophysical evaluation and cased hole log anaylsis including production logs.

Maintenance sector of Chemical/ Petrochemical/ Oil&Gas

MECHANICAL ENGINEER

With seventeen years work experience in oil and gas industry in construction, commissioning, and maintenance.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

20+ years shipbuilding and offshore piping and ventilation routing.

Network/System Administration & Support, Computer/Technical Support Specialist

A highly determined and skilled Mechanical Engineer with over 15+ years of overseas and in country experience in performing Piping Construction Supervision, in Oil/Gas process plants and pipelines projects too.

Engineer / MBA with 17 yrs exp in oil & gas, LPG Industry

Seismic Analysis: AVO, spectral decomposition, Seismic Inversion, attribute analysis, Shallow Hazards Analysis, Geopressure.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [ 48 ] 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out