Resume - Static Equipment Design Engineer with good knowledge in the design of Static Equ...

Misco Jobs

Resume #43365

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To explore new frontiers in the field of Mechanical Engineering and achieve excellence in the same.

EDUCATION
2003 (BE) Bachelor's Degree in Mechanical Engineering with First Class (74.4%)
1999 (HSC) Secondary School completion Certificate with Distinction (88%)
1997 (CBSE) Modern Senior Secondary school with Distinction (80.8%)

PROFESSIONAL EXPERIENCE
Aug 2005 - Present Larsen and Toubro Limited, Mumbai
Design Engineer - Mechancial
Nov 2003 - Aug 2005 BS&B Technologies Pvt. Ltd., Chennai.
Mechanical Engineer

PROJECTS INVOLVED
Aug 2005 - Present HPCL, India - Cyclemax Regeneration unit o Preparation of MR and PR for Heat Exchanger and Regeneration Cooler.
- Technical Bid analysis for Heat Exchanger and Regeneration Cooler.
- Checking of General arrangement drawing and fabrication drawing of Pressure vessels, Heat Exchanger and Regeneration Cooler.
- Checking of General arrangement drawing and fabrication drawing of Lock hopper and Disengaging hopper.
- Co ordination with Structural team for transportation and erection.

May 2005 - July 2005 ENSP, Algeria - Three phase Separator vessel o Mechanical Design of 650 psig and 1440 psig three phase separator.
- Checking and Approval of Fabrication and Internals drawings.
- Checking and Approval of Piping, Spool and General arrangement drawing.
- Pressure Vessel registration as per the regulations of Alberta Boiler branch, Canada.

Dec 2004 - April 2005 Conoco Phillips, Alaska - Two phase separator vessel o Over all Co-ordination of the project.
- Mechanical Design of 600 psig and 660 psig (-50 Deg F MDMT) Two phase separator.
- Checking and Approval of Fabrication and Internals drawings.
- Pressure Vessel registration as per the regulations of Alberta Boiler branch, Canada.

June 2004 - Nov 2004 Talisman, Teresan Gas, Joy propane etc.
- Projects in the design and fabrication of indirect Heaters and propane vapourisers.
- Projects in the design and fabrication of Separators and scrubbers.

Dec 2003 - May 2004 Shell Sarawak, Malaysia - Offshore Regenerator Skid Package o Mechanical design of Regenerator, stripping and still column, filters and scrubbers.
- Preparation of Datasheets, GAD and Fabrication drawings.
- Structural Design of Walkways, Platform and Skid.
- Checking of Structural detail drawings.
- Checking of Piping Drawings with GAD and P&ID.
- Coordinating with third party for Pipe stress Analysis using CAESAR II.

Nov 2003 - Dec 2003
In house Training in the field of Process Industrial practices, Process equipments, ASME codes, Structural design and BS&B standard specification.

ACHIEVEMENTS
* Received appreciation from BS&B for the most innovative design of Cyclonic inlet device in one project for Conoco Phillips, in 2006.
* Received the appreciation letter for getting the CRN from Alberta province (ABSA) at the first shot for two separator vessel, in 2005.
* Standardization of Process equipment drawings and documents (Indirect Heaters, Propane Vaporizers, Vertical and Horizontal Separators).
* Programming in MS EXCEL using VB EDITOR for Process / Mechanical Calculations.

TECHNICAL TRAININGS
* Attended Seminar on ASME and Heat Exchanger Design organized by Gramya Research and Analysis Insititute in Mumbai, 2005.
* Attended One-day seminar on Solidworks, Cadworx and Caesar in Chennai, in 2005.
* Attended One-day seminar on ANSYS in Chennai, in 2005.
* Attended One-day workshop on CAD and FEM in SMIT, Chennai, in 2003.

PAPERS PRESENTED
- Corrosion and its control - Basic Concepts, in BS&B in June 2005
- Four wheel steered automobile using Microprocessor Control in National Level Technical Symposiums held at Chennai, Trichy and Coimbatore and received the best paper award in 2002.
- FEM analysis of Rail wheel and axle in National Level Technical Symposiums held at Chennai, and Erode and received the second best paper award in 2002.

COMPUTER SKILLS
Operating System: Windows 9x/ 2000/ XP, DOS.
Languages: C, PASCAL, VISUAL BASIC.
Packages: MS Office, MS Project.
Modeling Software: AutoCAD 2000, PRO/E, Solid Works, CadWorx,
Design Software: Compress, PV-Elite
Analysis Software: Beginner in ANSYS and COSMOS.

PERSONAL INFORMATION
Hobbies: Journals, Books, Cricket, Music.
Extra curricular activities: Captained the College Cricket Team.
Captained BS&B Cricket Team.
Playing for L&T Cricket Team.

REFERENCE
Will be Furnished upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6251 to 6300 of 9785)

Go to Search Parameters...

Brief Description

Three Years Diploma holder in Mechanical with 5-years experience in an Oil & Gas E&P Inc. as "PRODUCTION OPERATOR", Seeking prospect to utilize my knowledge, experience, skills and exceptional ability for the post of "PRODUCTION/FIELD/PROCESS/FACILITY OPERATOR" in an Oil and Gas organization.

Automotive, Mechanical, Catia V5 R14, Unigraphics NX 2, Hypermesh 7.0, LS Dyna 960, Ansys 8.0, Adams 2003, Fluent/Gambit

Static Equipment Design Engineer with good knowledge in the design of Static Equipments like pressure vessels etc. in accordance with ASME Sec VIII Division 1.

ABAP consultant with 2.7 yrs of exp. expert in reports, BDC, ALE, IDOCS

B.Tech. (Chemical Engg) NIT/REC India; MBA (Finance) 2~3 yrs experience in Project Management

Marine 1.Engineer Officer Certicate, 8 years experience with mechanical maintenance and as a watchkeeping engineer in the engine control room

Stong knowledge of DRC market, procedures and culture. Good experience in Mining procedures in DRC.

Conversant in handling of sophisticated chemical engineering process design simulator, (HYSYS 2006;etc).

Piping using CAESAR II, AutoCAD etc & MS-Office B.Tech Mechanical

Up to (10) years experience in oil and gas industries at onshore and offshore fields for coating of steel structure, vessels, storage tanks, equipment, pipelines, offshore fixed platforms and single buoy mooring.

I have completed my graduation in mechanical engineering and parallel to that i did a diploma in industrial safety ( distance mode) . I am looking for a job in oil field as a trainee graduate engineer in the drilling department to begin my career as a drilling engineer

Planning Engineer, Certificate of degree Dr. of Philosophy

An independent and self-motivated professional, with over 10 year’s experience of administrative support.

Over 14 years experience in Quality Assurance / Quality Control (QA/QC) activities with various reputed organizations in different Projects. Familiar with ASME, API, AWS & other international codes and standards. Highly energetic, motivated, dedicated professional with strong communication and team

Crawler Crane Operator

Hardworking, responsible, career oriented, highly motivated, independent and trustworthy

Experienced and innovative operation & maintenance engineer with technical leadership in commissioning & operation and maintenance activities, quality achievement, reliability, efficiency, customer service and cost reduction goals. High level of management skills with outstanding leadership

Masters degree qualified, Previous experience as a QA/QC Engineer on a gas plant and pipeline laying project, looking to move into upsream operations preferably drilling and completions engineering or facilities engineering

Petroleum Engineer

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

Objectives To pursue a career in a progressive organization that provides opportunities for career growth and professional development and also in order to groom the overall personality.

Masters in Geology, Two years research experience in the field of Oceanography

Air Separation Operator with 10+ years in the cryogenic field. Started in the Marine Corps and now working for a major bulk gas supplier, operating a 400 ton liquifier.

Four years of professional experience with international engineering companies. System-level knowledge of PLCs, HMI Packages, Controls Programming and Electrical Design. Hands-on experience with object-oriented software simulation, design, implementation and verification techniques.

I am interested in expanding my working knowledge of the oil and gas industry. I am an educated mechanic with the ability to repair any type of equipment with adequate resources, tools, repair manuals or verbal instructions.

Fully qualified analytical chemist. 4 1/2 years experience in the offshore industry on a FPSO, offshore Angola. Recently promoted to supervisor.

a chemical engineering graduate (B.Sc) and presently doing a masters degree in oil and gas engineering at the Robert Gordon university Aberdeen.

I would like to apply as a Geologist/ Petrophysicist. I am an post graduate from Indian Institute of Technology, Mumbai, in Geoexploration. I have experience of about 2 years in open hole log evaluation, during my employment with Schulmberger Asia Services Ltd.

Assigned to carry out preventive maintenance of 415 Volt electrical and motor control and plant lighting and building lighting. Familiarized with various electrical wiring and switching socket for computer supply. Wiring motor control for single phase and three phases.

I am a hardworking trustworthy individual who has been working in the tourism industry for the last 10 years. I have managed food and beverage operations as well as horseback guiding camps. I believe that my skills working in this industry would be transferrable to the oil industry.

Good knowledge in Maintenance of Oil/Gas and Refinery equipments and procedures.

Electrical Tradesman, Electronics Experience, Reliability Planning and Scheduling (Oil & Gas)

i am working as electrical supervisor in wapda pesco and lokking to go abroad my cv is attached.

I already have an expirience as a M/LWD Field Engineer during my internship program.

Experienced camp boss/site manager worked as camp boss in russia, kazakhstan,Equatorial Guinea,as Site manager in Angola and Chad .

Diploma In Mechancial Engineering+NEBOSH Level-3+Post Diploma In Industrial safety Management+Environment, Health and Safety Management Specialist Certification course from NASP of USA/14 years experience in Oil&Gas as HSE Advisor/Engineer/Officer/coordinator/

Instruemntation with Spc.in DCS/PLC/SCADA & metering system

I have been working as a cook for many years now and I possess over 25 years of experiences in the domain. Just to give you a brief idea, I worked as a cook for over ten years in a bush camp with over 40 people to my charge (for treeplanters, hunting and fishing resort and for a Mining Exploration

Qualified Fitter and Turner / metal machinist

: 25 Years experience inLicensor selection for SRU / DCU/ HCU /FCCU/ DHDT/CRU units

MBA(HR), Bachelor of Engineering (Mechanical); Skills: Computer - Ms Access, MS Office, working knowledge of SAP. Soft Skills - Training Need identification, Organising Training, Trainer, Communication, Presentation, Negotiation Skills.

Senior Instrumentation Supervisor / Engineering Planner with SAP R3 experience

Quality, Environmental and Occupational Health & Safety Management Systems specialist, ISO 9001:2000 Lead Auditor, Quality Circles, Six Sigma, Use of Statistical Tools, Training, Auditing etc.

Primavera Junior Scheduler

Razan Saleem Naman

Offshore Installation Manager with 25 years experience in the Oli and Gas industry

Process Engineer

Control & Instrumentation Engineer with 17 years of experience in Projects, Manufacturing, Operations, Technical

I am ready for use - I do not like office job only offshore or onshore hardworking zone

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 [ 126 ] 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out