Resume - Skill: I have worked as Production Shift Supervisor in Gas processing plant from...

Misco Jobs

Resume #43492

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE
July 2000 to March 2006
Sangu Operations, Kellogg Brown & Root, Bangladesh Limited
Chittagong, Bangladesh.
Job Title:
Production Shift Supervisor/OTL in Sangu Operation, First offshore Platform (unmanned) based well exploration in Bangladesh, operated by KBRBL, a concern of Halliburton.
Responsibilities
(i) Supervise day to day production activities in 12 hour shift of Natural Gas Processing Plant,
(ii) Coordinate and Control maintenance activities by implementing Permit to Work System,
(iii) Planning & Coordinating monthly Preventive Maintenance Routines for maintenance and production Department,
(iv) Trouble Shooting in Process Plant activities,
(v) Carry out on job training & write procedure,
(vi) Lead Offshore team for Platform( Unmanned ) routine maintenance activities,
(vii) Assist Well Intervention Campaign for Offshore Well drilling Activities/ Slick line/Wire line activities,
(viii) Assist in and implement KBR HSE policy to achieve ISO 14001 & Six Million Hour with out LTI.

March 1998 to June 2000
Sangu Operations, Kellogg Brown & Root, Bangladesh Limited.
Chittagong, Bangladesh.
Job Title:
Senior Production Engineer
Responsibilities
(i) Carry day to day production activities i.e. Plant monitoring & Control,
(ii) Prepare & carry out Process Isolation for maintenance job,
(iii) Assist Shift Supervisor for day to day production activities,
(iv) Assist in Plant Trouble Shooting.

March 1997 to February 1998
Ammonia Plant, Chittagong Urea Fertilizer Limited
Chittagong, Bangladesh.
Job Title:
Assistant Engineer (Section In-charge of Rear end) in Ammonia Plant of CUFL, a Urea Fertilizer Factory and a concern of Bangladesh Chemical Industries Corporation.
Responsibilities
Supervise routine activities of Plant operation with unit involving ammonia conversion reactor, ammonia refrigeration compressor driven by steam turbine, Cooling tower with water treatment facilities, Liquid Ammonia Storage Tank, Shell & Tube heat exchanger unit, stream driven pumps etc.

November 1994 to February 1997
Quasem Dry-cell Limited
Tangail, Bangladesh.
Job Title:
Senior Quality Control Officer in Battery Manufacturing Company, a concern of Quasem Group.
Responsibilities
(i) Head of Quality control Department contained work force of 30,
(ii) Design & Implement procedure to improve product quality,
(iii) Trouble Shooting related to Quality from the raw materials to end product.

EDUCATIONAL QUALIFICATION
1986~1993
Bangladesh University Of Engineering and Technology, Dhaka, Bangladesh.
B.Sc. Engineering (Chemical)
Achieved 2nd Class( Upper),
Major Subjects
Process Design, Unit operation, Management & Economics for Chemical process industries, Corrosion Engineering, Chemical Process control, Chemical Engineering Thermodynamics, Mass transfer, Heat transfer, Fluid Mechanics, Transport Phenomena, Elementary principles of Chemical Engineering, Natural gas Engineering.
Design: Process Plant Design to produce Soda-Ash based on Modified Solvay Process.

1986, Comilla Board, Chittagong, Bangladesh
Higher Secondary Certificate (H.S.C), Chittagong College, 1ST Division.

1984, Comilla Board, Chittagong, Bangladesh
Secondary School Certificate (S.S.C) Chittagong Govt. High School, 1ST Division.

ADDITIONAL PROFESSIONAL ACTIVITIES
(i) Had attended a Workshop on Hazard Evaluation in Process Industries, organized by BUET and North Carolina A&T State University, USA.
(ii) Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA SDN. BHD in Johorbaru, Malaysia, a member of Nutec Group.
(iii) Successfully completed training course on Managing Major Emergencies Assessment for Gas Plant Managers, assessed by R.L. Roberts, SQA Assessor Number 977095166.
(iv) Successfully completed training course on "Compressor & Compression System Operation" conducted by Training Institute for Chemical Industries, Bangladesh.
(v) Had attended a Workshop on Development of Supervisory/Managerial skill, conducted by KBR.
(vi) Completed Basic First Aid Training conducted by Bangladesh Red Crescent Society.
(vii) Successfully completed training course on Basic operation and Maintenance of Turbo-expander conducted by Mafi-Trench Corporation, USA.
(viii) Successfully completed training course on Use of Self-contained Breathing Apparatus for Fire Fighting.
(ix) Completed 3(three) week Industrial Training in Eastern Refinery Limited, Chittagong.

CAREER OBJECTIVE
Develop career in Oil & Gas / Refinery Industry.

REFERENCES
Dr. Muhammad Yunus
Managing Director and founder of Grameen Bank
Inventor of Micro Credit system.
Dr. Muhammad Ibrahim
Professor of Physics, Dhaka University.

HOBBIES Traveling, Watching Movies and Learning New Technology.

INTERESTS AND ACTIVITIES
Computer Skill - have a good knowledge in operation system Window XP.
Application packages: C, FORTRAN, MS Office for Excel, MS Word, Maximo Database for Plant PM.

I hereby declare that all information given herewith is accurate and up-to-date.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out