Resume - Have more than thirteen years of experiance in log interpretation

Misco Jobs

Resume #44682

CONTACT INFORMATION:
View contact information...

OBJECTIVES:
Seeking assignment in open and cased hole log data interpretation, wire line logging service and petrophysical research studies.

CORE COMPETENCIES:
Petrophysicist with wide range of working experience in open hole, cased hole and production logging data interpretation.
1. Log quality check / control of petrophysical data.
2. Qualitative interpretation of open hole, cased hole, production logging data for taking on the site decisions.
3. Quantitative interpretation of open hole logs for formation evaluation, reservoir characterization and formation parameter estimation.
4. Qualitative / quantitative estimation of reservoir parameters using CMR logs.
5. Petrophysical analysis using work station based software (GEOFRAME).
6. Capable of handling following Geoframe modules:

- Data load module for loading data from different media.
- Composite log display module for display of logs.
- Well Edit module for depth match, depth shift match and log Splice.
- Preplus module for environmental correction.
- ELANplus module for petrophysical analysis and estimation.
- Ressum for reservoir parameter estimation.
- Playback of CMR log.
- Re-computation of CMR log output with changed parameters.
- Playback of Dipmeter, FMS and FMI log data

7. Quantitative interpretation of production logging data.
8. Data acquisition for Open hole, cased hole and production logging services.

PROFESSIONAL PROFILE:
Interpretation of well logs:

Have about 10 years of experience as a log analyst. Have sound knowledge in interpretation of open hole, cased hole and production logging data.
* Presently using ELAN plus (Geoframe) software for interpretation of open hole logs for the last three years, otherwise used inhouse software LOCPROC.
* Analysed the open hole and production log data of fields in India, mainly Mumbai High field, Lakwa and lakhmani field of Assam Arakan basin and Ahmedabad and Mehsana area of Cambay basin. Issued formation evaluation report for exploratory and development wells.
* Made qualitative use of log data from CMR, FMI to facilitate interpretation of open hole logs.
* Quantitative interpretation of production logging data from flow meter, fluid density and temperature tool were made leading to study of production profile, injection profile, fluid loss if any. Detection of other well problems such as cross flow, thief zone, casing leak, packer leak etc have been made using temperature, fluid density, continuous flow meter tool data along with water hold-up meter, noise logging tool data and tracer survey data.
* Cement evaluation, casing corrosion etc using CBL, CAST, USIT etc.

Data acquisition:

Worked for about 13 years as a Logging Engineer for acquisition of well log data for open hole, cased hole and production logging jobs.
* Recorded data using resistivity tools (DLL, DIL), porosity tools (CDL,CNS, BHC etc) along with Gamma Ray and Caliper log for open hole logging.
* Have experience of recording data from fluid density, temperature, flow meter, noise logging, water holdup meter, HP pressure gauge in producing / injecting wells. Recorded data using CBL tool for cement evaluation behind casing, Multi arm casing caliper to study casing condition and free point indicator tool to detect stuck point for tubing / drill pipes.
* Have experience in perforation jobs for conventional and under balance perforations.
* Have experience in setting Bridge Plugs / Packers using wire line equipment.

Supervision / management of logging activities:

Worked for about three years for coordinating logging programs with logging service companies. Preparation of logging suits for exploratory and development wells, and financial evaluation of workload.

EDUCATIONAL QUALIFICATIONS:
Acquired graduation degree (B.Sc.with Physics, Chemistry, Mathematics) from Delhi University, Delhi (India) in Ist division.

Acquired post graduation and doctorate degree (M.Sc. and Ph.D in Physics) from Kurukshetra University, Kurukshetra (India). M.Sc. was completed in Ist division.

TRAININGS RECEIVED:
Have received number of in-house trainings. Some of them are as given below:

1. Training on DDL-V logging unit, Dec 9-12,1991 at Ahmedabad. (Facalty
HLS India)
2. Training in Unix, C, C++ and computer net working, May 24 – June 18, 1993
at NCST, Mumbai. (Facalty NCST)
3. Basic Petroleum Geology, Sept 7-11,1998 at Dehradun. (Facalty ONGC)
4. Advances in well log applications, Oct 6-10, 2003. (Facalty Mr.O.Serra)

TRAINING ABROAD:
During 1985, received training in " Operation repair and maintenance of Sodesep Production Logging Unit and related equipment". The duration of the training was six weeks and was conducted by engineers of M/S Sodesep, at Vitrolles in France.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 9871)

Go to Search Parameters...

Brief Description

Project Management, Project Controls

A B.Sc. Chemical Engineer with over 23 years of experience in oil&gas and Petrochemical Industry, I am specialist for different Petrochemical processes (Steam Reformer,H2/CO production-purification with Cold Box or PSA, Chlorine production and liquefaction…), commissioning and start-up. I am able to

22 years of experienced geophysicist/exploration specialist

Country Manager for Pakistan

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Positions - Project Manager, Project Control Manager, Planning Manager and Director in the area of process simulation, predictive control and risk. Hands on, onshore plants (oil, gas), aluminum, ammonium nitrate, offsite and utilities, offshore platforms and pipelines. Capex from $100M to $5Billion

I am a senior planning engineer with 19 years of experience in various infrastructure, Oil Rig Projects etc.

26 years maintenance electrician troubleshooting using plc and ladder logic. dc drives ac and dc motors and controlers

Industrial Engineering

Have been employed by oil production companies for more than TWENTY TWO YEARS. Have experiences in the areas of project management of multi-disciplinary mega projects in oil and gas industry, covering all project management processes of project initiation, planning, execution, control and closeout.

22 years of working experience in E& P Industries.Experience covers entire spectrum of Geophysics i.e. from Seismic Data Planning& Acquisition to Seismic Interpretation.

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

Marine Pilot/ Mooring Master/ Loading Master

15 years of experience with visible/near-IR and hyperspectral imagery, and image exploitation (I have co-authored a book on hyperspectral remote sensing). I have a Ph.D. in Geology, an M.S. in Computer Science and I will have an M.S. in Applied Math in Spring 09.

With over 30 years in the Oil and Gas industry responsible for Health, Safety & Environment (HSE) and Loss Prevention (LP) activities on major offshore floating FPSO’s and fixed Installation projects. I can offer a broad range of safety experience from HSE/LP engineering to management.

On shore & Off shore Safety Execution – Off shore platform, Oil & Gas Refinery & LNG Gas Plants-shutdown/ Maintenance

25 years experience, experienced inj oil-gas field and reservoir development

To obtain an IT position that utilizes my experience as an IT Manager having responsibility for all aspects of IT including managing staff and departmental budgets with specialty in Oil and Gas industry.

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Highly experienced senior manager in exploration, new ventures, reservoir management and optimization of exploration and production portfolios in conventional oil, gas, and heavy oil. CEO and president level recognition for exploration and reservoir management results.

Chemical Engineer with long experience in Refinery and Chemicals Process Modeling

Registered Professional Engineer (P.Eng) in the Province of Alberta.

Have more than thirteen years of experiance in log interpretation

Operations geologist

Instrument technician with 13 years experience

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

M. Sc. & B. Sc. in Computer Science, USA. Detailed knowledge and practical experiences in general maangement, performance management, Balanced Scorecard, and project Management. Having solid background in IT and business communication.

Highly Experienced Crane and Lifting Engineer

Marine Engineer, Chief Engineer Unlimited

qa qc inspection oil gas engineer coordinator welding painting ndt auditing equipment

Contract management Specialist

Accomplished PLC, HMI, automation, programmable controls specialist

A Production Engineer with over 25 years of oil and gas field experience in domestic and international operations. Solid record in building project teams in multidiscipline and multilingual work groups. Strengths include planning, organization, and communication.

B.Tech.(Chemical Engineering)Gold Medalist

+29 years of professional experience,7 years in materials laboratories and Seismological research Institutes, 22 years working for E&P oil and gas Companies in Venezuela.Expertise as Petrophysicist, background in science,extensive knowledge of computer language and application,experience in clastic

operation manager

A highly skilled Staff with over 20+ years of International and Domestic Experience in performing Oil and Gas Industries. I am fully conversant with Process Operations and Control procedures and presently working with Multi-cultural environment .Secure a challenging position where in my team player

I have a wide variety of experience in the field of heavy equipment management (maintenance, operations & repairs) in construction, petrochemicals, transportation, logistics and other related field.

Senior drilling fluids engineer looking to progress career with a position as a night drilling supervisor. Over 27 years experience offshore.

Free! Dynamic and accomplished Operations and Technical Development Leader with 20+ years of demonstrated achievements in devising effective operational improvements. Driven professional known for setting comprehensive organizational strategic direction and vision.

Electrical Engineer with more than 20 years of experience with PLC and HMI projects: Design, implementation and commissioning. I've worked in projectos for Food and beverage,

DRILLING ENGINEER

Biofuel / biodiesel technologist ( oil & fat technology)

Exploration, Operations, Management, Biostratigraphy, Sequence stratigraphy, Sedimentology, Basin Analysis, Clastic, Carbonate, Seismic, Geochemical, Geophysical

I am having 19 years of multidisciplinary experience in oil & gas industry and competency in multiple modes of delivery (onshore, offshore, jack-ups/floaters-drill ships). Past 5 years I am working for Shell in Oman, Brunei and Sarawak (Malaysia) as Drilling Supervisor.

Oil and Gas Operations Mnagement

20 years experience in drilling operations

Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.

25 years of experience; more recently as Principal/Lead Engineer. 5 years in middle/senior management. Most contributions are in design, engineering & commissioning of pumps, compressors and turbines. Oil & Gas experience includes Refinery and Upstream, Marine, Pipeline pumping & compression stn.

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out