Resume - I am a mathematics post graduate alongwith apprentice training in refiney techno...

Misco Jobs

Resume #45077

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
University of Karachi, Pakistan
Master of Science in Applied Mathematics (1991)
Bachelor of Science (1990)
As M.Sc. (Final year) operation research project, completed a project on unit shut-down and start-up activities using PERT-CPM Technique.

COMPUTER LITERACY
- BASIC, COBOL and Turbo C Programming.
- Electronic Data Processing.
- Microsoft Word & Excel.

OBJECTIVE:
My objective is find a handsome paid job in related profession within canada, for the perminent settlement of my family in canada.
Most required position are commissioning Engineer, Process/Production supervisor/Suprientendent.
I would like company to provide family visa & accomodation etc.
as I dont have any intension to live alone. But A rotation job 4 weks on/2 or 4 weeks off job as well acceptable where I can keep my family in near by cities/state.
you can see I am insisting so much on family as my kids are very young and requuired my attention for a better growth.

WORK EXPERIENCE:
Approximately 17 years in Petroleum and Petrochemical industry working as a Plant Manager/Area superintendent/shift controller/Process Supervisor / Operator including 13 years on overseas assignment.

Have been involved in grass-root start-up of the Polypropylene Production Unit.

Worked as a Panel Operation Supervisor for Commissioning and start-up of crude distillation unit in PERTAMINA, Export Oriented Oil Refinery, Indonesia

Involved in the Pre-commissioning, Commissioning and Start-up of OGD-545 (ADNOC, Habshan Project, UAE).
Preparation of Pre-commissioning / Commissioning Procedures and on job training of client's operation staff.
Completed commissioning and start-up of Bukhara Refinery, Uzbekistan

Worked as a technical advisor for Bukhara Refinery, Uzbekistan.

Involved in pre-commissioning / commissioning and start-up of MIDOR EGYPT.

WorKED as a Chief Technical advisor and as Area Manager for H2 Production & Hydrocracker unit, in MIDOR Alexandria EGYPT.

Workind As Senior Commissioning Engineer/Site Responsible In Lldpe Iran.

EXPERIENCE OF THE FOLLOWING UNIT
- Atmospheric Distillation Unit
- Kerosene, Naphtha and Diesel Hydro-treating Units
- Plat-forming Unit (Fixed bed and moving bed catalyst reactors)
- Propane Recovery Unit
- Gas Separation / Stabilization
- Sour Gas Treatment
- Sour Water Treatment
- NGL & Condensate Recovery
- Sulfur Recovery Unit
- Steam Reforming Unit (H2 production)
- Hydrocracker Unit

EMPLOYMENT HISTORY
A) Amir Kabir Petrochemicals, Bander Imam Iran

Designation: Senior Commissioning Engineer/Site Responsible.
Contracted to Technip Abu Dhabi, seconded to Technip Paris
Period: Nov. 2005 to present.

Responsible for the Plant operation follow-up, trouble shooting, Preparation of performance test run, site management, organizing & correspondence with vendors for the Linear Low Density Polyethylene Project
(LLDPE: Capacity 300 Mt/Annum)

B) Middle East Oil Refinery, Alexandria, Egypt

a. Designation: Chief Technical Advisor
Contracted to IPEDEX, seconded to TECHNIP
Period: October 2003 to September 2005.

After handover of Hydrogen production and Hydrocracker units from TECHNIP to CLIENT, Working as a Chief Technical Advisor for the Similar facilities.

b. Designation: Area Manager
Contracted to IPEDEX, seconded to TECHNIP

Period: October 2002 to September 2003.

Job involvement: Responsible for the Production, Maintenance & Operation of the following facilities.

- HYDROCRACKER
The unit is design to process 33400 BPSD Vacuum Gasoil.
Design overall conversion 97%, once through conversion 66%.
Design reaction pressure 162.3 Bar g.

- Steam Reforming (H2 Production)
The unit is design to produce 5899 Kg/h 100% pure H2, including 51 t/h steam production. Hydrogen purification attempted using Poly-beds PSA unit.

C) MIDDLE EAST OIL REFINERY, Alexandria, Egypt
Designation: Panel supervisor / Area Superintendent
Contracted to IPEDEX, seconded to TECHNIP
Period: January 2001 to September 2002.
Job involvement: Responsible for pre-commissioning, Commissioning, Start-up and Normal Operation of the following facilities.
- Steam Reforming (H2 Production)
- Hydrocracker
- Gasoil Hydro-treating
- Sulfur Recovery
- Storage Off site.

D): BUKHARA REFINERY, UZBEKISTAN
Designation: Shift Supervisor / Technical Advisor
Contracted to IPEDEX
Period: December 1997 to December 2000.

Job involvement: Responsible for the Technical Advice and Troubleshooting of all the
Facilities involving following units.
During services organized the spare parts order for all the equipment/instruments.
Prepared and applied the procedures for the Refinery General shutdown.

Performed coordination with vendors for equipment/instruments
Guaranties and troubleshooting.
- Crude distillation
- Naphtha / Gas-oil hydro treatment
- Kerosene sweetening (catalytic)
- Sour gas sweetening
- Platforming (catalytic cracking) provided with moving
Beds reactors. Catalyst Regeneration & Circulation.
- Sulfur recovery unit
- Sour water treatment

E) BUKHARA REFINERY, Uzbekistan
Designation: Senior Panel Operator / Supervisor
Contracted to IPEDEX - Seconded to TECHNIP
Period: July 1997 to November 1997

Job involvement: Responsible for the commissioning & start-up of all above mentioned units as senior panel operator (Honeywell TDC-3000) also for the technical guidance & training of client's operation staff.

F) ONSHORE GAS DEVELOPMENT PROJECT - 545, ADNOC
Habshan, Abu Dhabi (UAE)
Designation: Senior Panel Operator / Supervisor
Contracted to IPEDEX - Seconded to TECHNIP

Period: June 1995 to June 1997
Job involvement: Responsible for the pre-commissioning, commissioning and start-up
Activities on Panel (DCS - BALEY INFI - 90) as well as in field.
involving the following units:
- Liquid / Gas Separation
- Sour Gas Amine Treatment
- NGL & Condensate Recovery
- Sour Water Treatment

G) PERTAMINA EXPORT ORIENTED OIL REFINERY, Indonesia
Designation: DCS Panel Supervisor
Contracted to IPEDEX - Subcontracted to JGC Corporation
Period: March 1994 to December 1994

Job involvement: Responsible for commissioning and start-up activities as a Panel
Supervisor (DCS Centum - XL) for Crude Distillation Unit, with a
Capacity of 125,000 BPSD also responsible for setting parameters to achieve on specifications products.

H) SAUDI EUROPEAN PETROCHEMICAL COMPLEX, Saudi
Arabia Ibn Zahr Polypropylene Project, having capacity 200MT/Anum
Designation: Process Technician

Period: January 1993 to March 1994

Job involvement: Responsible for Panel and Field operations on the following units:
- Purification (Hydrogen, Nitrogen, Ethylene, propylene)
- Polypropylene Production
- Propylene Recovery Unit
- Steam Generation System

I) NATIONAL REFINERY LIMITED, Pakistan
Designation: Process Technician
Period: September 1988 to January 1993

Job involvement: Responsible for Panel and Field operations on the following units:

- Atmospheric Distillation Unit
- Kerosene & Naphtha Hydro-treating Unit
- Platforming Unit
- Propane Recovery Unit

EDUCATION & CERTIFICATION:

FURTHER TRAININGS
- DCS Honeywell 3000 system
- Fire and Safety
- Safe furnace firing
- Safe handling of light ends
- Gas testing
- Electrical lock-out procedure
- Work permit procedure
- Safety on construction site
- Cardio pulmonary resuscitation
- Introduction to ISO 9000
- Positive displacement compressors

ADDITIONAL INFORMATION:
I have an average persnality but able to convince people. On site always manage have very friendly atnosphere with client staff & management. Having helping attitude towards my collegues.
My hobby is to watch Tv serial, movies etc in my leisure time.
As well to play cricket/tennis whenever time permits. I used to make some gym activities to keep myself fit.

FOR REFERENCE:
Avaulable upon request.

I have only Pakistani citizenship and applied for Canadian immigration.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 9905)

Go to Search Parameters...

Brief Description

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

XRF, AAS,particle analysis, catalysts(nickel, chromium),Adsorbents(Zinc Based),Water analysis, UV-VIS spectrophotometry, Winlims administration, Training

Piping Field Engineer – Technical Office

I have generated prospects in several basins. I am a proven oil finder and a team player.

B.Sc. in Geology, M. Sc. Geophysics Working as Co-coordinator & D. Geophysical Manager

Petroleum/Oil/Gas - Economics and Technical Management - Chem Eng - 30 yrs exp.

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

Treasury professional with 20 years experience working for three Fortune 500 companies.

Looking for a job where I can use my talents in the area of Petroleum Engineering and/or Application and System Programming for solving problems

Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.

30 years of professional experience. Having experience in seismic data acquisition and processing including velocity analysis, de-convolution,wavelet processing, migration velocity smoothing, VSP, Well logs, strong knowledge in computers and Seismic Unix processing. M. Sc (Exploration Geophysics).

Acquisitions. Over 20 years of experience in all phases of reservoir engineering with emphasis on economic analysis, acquisitions and divestitures, reservoir characterization, mature field optimization, and reservoir management and exploitation.

SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills.

A western educated finance professional with 23 years of accounting, strategic cost analysis, corporate finance, listing, valuations, banking, project finance and execution, supply chain, restructuring, turnaround, strategy, business development and board experience with world class multinationals.

More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

An Oil and Gas Professional with expertise in International Operations Management, Assessment of Technical Data, and Long-term Business/Budget Planning. Managed international operations, PSC and construction contract negotiations, liaise with foreign governments and, field exploration/development.

HAVING 23+ YEARS OF SERVICE ,INCLUDES 20YEARS IN INDIAN AIR FORCE AND PRESENTLY ENGAGED WITH PRIMUSTELECOMMUNICATION INDIA LTD

Business Analyst Technical Writer Project Manager Programme Director

Take advantage of 30 years corporate experience. I can train your junior staff to become very proficient with Paradigm's GEOLOG 6 software. My specialty is reservoir characterization, with emphasis on probabilistic log interpretation using GEOLOG's Multimin program. Worldwide contracts considered.

Electrical, Control Systems and Instrumentation Engineer: great international experience designing, installing, testing, calibrating, starting up, commissioning, maintaining and repairing industrial electrical, instrumentation and control systems, in the natural gas and others industries.

Senior Engineer with Masters in Business Administration and possessing over twenty-two years of experience in Electrical/Instrument Maintenance and Project works in refining and petrochemical industries.

QHSE Manager, EOD/UXO consultant, height safety specialist, International experience and dedicated professional.

SAS and COBOL Programmer with DB2 and SQL experience

My experiences have included not only involvement in reservoir engineering , but also having a broad field experiences with an understanding of operations and proficiency in computer reservoir applications.

OBJECTIVE Seeking a challenging position at senior management level in R&D and Manufacturing / Technical Services / Applications Development / Technology Strategy Planning./Project Implementation

Offering MBA Leadership, insightful, analytical, and creative engineering leader successful in conceptualizing and implementing cost-effective solutions and leveraging key advantages in complex environments. Resourceful team builder and project manager adept at building and leading teams.

Project management and development experience in international energy and infrastructure projects. Extensive oil and gas experience in EPIC projects, including onshore and offshore structures, pipelines, subsea and floating production systems. South America, GOM, West Africa and SEA experience.

Over 20 years of Oil and Gas experience using/supporting technical applications for oil companies & vendors (Landmark, Geoquest, and Paradigm). The past 8 years, my focus is on project management, building/leading application support team, workflows, database, data management and GIS solutions.

Free! Experienced in managing Quality and HSE activities of multinational Petroleum refining and marketing companies including TOTAL & SHELL and successfully developed quality and HSE standards and procedures and rolled out global initiatives at the corporate level. Experience in leading cross functional

PDMS Desgn,Draft, Isodraft and Catalogue Creation and MDS supports

OFFSHORE STRUCTURAL ENGINEER, JACKET ,TOPSIDE, FPSO STRUTURE DESIGN EXPERIANCE

Worked for Offshore / Onshore for Installation, Construction of Offshore facility , Pipeline , Degree in Metallurgy, Piping Engg, ISO 9000, CSWIP 3.2, Painting Insp, API , ASNT Level II

Well evaluation,formation evaluation,basin evaluation and static reservoir 3D-model

More than Fifteen (15) years in Piping (Onshore and Offshore) & Pipeline Design experienced (Onshore) relating to oil & gas projects, petro¬chemical and cross-country pipelines.

Instrument Engineer with15 Years of experience

ELCTRICAL ENGINEERE

Level 4 scheduling in oil&gas with Primavera

Continuous scaffolding job for more than twenty (20) years in the field of construction, Petro. Chemical Plant and Oil & Gas Industry.

I am a mathematics post graduate alongwith apprentice training in refiney technology. I have choosen refinery tech. as career. Approximately 17 years in Petroleum and Petrochemical industry working as a Plant Manager/superintendent/shift controller/ Supervisor / Operator including 13 year on ovseas.

Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F.

Instrument engineer

Having 13 years experience Inspection activities on oil & gas, Pipe Line, Petrochemical and Off shore module structures. Have served with multinational Companies in Gulf. Familiar with ISO – 9000 Quality Management System requirement, International Codes and Standards. .

Ph, D. in Chemistry. Ten years experience as an oilfield corrosion engineer. Specialized in cathodic protection diagnostic surveys (CIPS, DCVG). Comprehensive computer knowledge (programming, database design). Internal corrosion protection experience (corrosion and scale inhibitors, biocides).

Basin Modelling, Geochemistry, Petroleum Geology, Prospect Generator, Charge Evaluation, Charge Risk Assessment, Seismic Interpretation

I have experience in all phases of both electrical and petroulem experience.

Mechanical Rotating Machinery and Static Equipments

20 years experience in the Instrument & Controls through to Information Management arena

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out