Resume - BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safe...

Misco Jobs

Resume #45416

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To obtain a position as HSE (Health, Safety & Environment) Officer/Advisor.

CAREER SUMMARY
Dedicated professional with 11+ years of experience as HSE (Health, Safety & Environment) Focal Point & Operations Engineer in Shell Gas LPG (Pakistan) Limited. Proactive leader with the expertise to trouble shoot, initiate change & improve production processes while maintaining positive, safe & productive environment. Mainly responsible for:

- Maintaining the safety programme & identifying safety needs.
- Communicating safety hazards, investigating hazardous conditions & accidents.
- Providing training, supplying & wearing personal protective equipment & maintaing all equipment as well as assessing & controlling work place hazards.
- Responsible for arranging and maintaining LTIF's (lost time injury frequency), safety talks, unsafe behavior, vehicle inspections, incident near miss reporting, occupational illness reporting & implementing clean desk policy.

CAREER EXPERIENCE
HSE Focal Point & Operations Engineer
Shell Gas LPG (Pakistan) Ltd. 1993 to 2005.
Achievements:

- Awarded Long Service Award in recognition of long service & completing 11 years by Shell gas LPG Ltd.
- Awarded bonuses for extraordinary performance on several occasions such as completed 2 million hours with out lost time injury.
- Met all targets set by Health Safety Security & Environmental Advisor (HSSEA) and received awards.
- Coordinated rectification of Karachi Electric Supply Corporation (KESC) cable fault in conjunction with several other departments as per company HSE policy.

SKILLS/DUTIES - SUMMARY:
- Responsible for monitoring and reporting of HSE MS (Health Safety & Environment Management system).
- Responsible for monitoring occupational health and safety or environmental programs-implementing and monitoring safety and environmental programs.
- Supervised the team to achieve highest gas filling volume at 31,037 Metric tons in the year with laid down procedures in plant operations manual and HSE.
- Led team to achieve filling / bulk/HSSE and dispatchers targets,and control losses.
- Installed and checked products to ensure safety standards were met in the field.
- Coordinated with suppliers to ensure maximum daily share of product was received and exceeded industrial benchmarks every quarter as per safety standard.
- Performed random Quality Control inspections.Ensure to keep up to date all operational manuals and codes for safe plant operations.
- Assisted Plant Manager with implementation of plant operations & Health Safety Security
Environmental Audit (HSE MS).
- Produced 15 monthly plant and HSE reports and 5 quarterly reports OP / HSSEA.
Responsible for:
- Three plant audits each year (Internal/External & HSSE);
- Three Health, Safety, Security Management Audits
- General Control Review (GCR) once every three years.
- Maintained inventory system & stock balancing by using JDE software.

Special HSE Duties
- Monitored HSE action plan against targets and prepared reports from 2000 to 2005.
- Developed HSE case and HSE AFI's (Area for improvement).
- Monitored PI's (Potential incident reporting) and selected Safety man of the quarter.
- Arranged fire fighting drills on fortnightly basis.Trained 25 new employees.
- Implementation of PPE's (permanent, protective, equipment)
- Conducted presentations for plant HSE on monthly, quarterly & yearly basis as well as prepared reports for management and then for group & developed HSE score card criteria.
- Preparation of HSE KPI's (Key performance indicators)
- Implementation of environmental standards through HSE MIS (Management information system) and organised HSE week every year from 2000 to 2005.
- Responsible for Near miss accident reporting and Risk assessment management system.
- Conducted 15 safety presentations each month in cooperation with "Safety Alert".

EDUCATION: BS Engineering, Eligible for registration with APEGGA.

EMPLOYMENT HISTORY:
Oct 2005 - June 2006 ITN Food Corporation Canada,40 Commander Blvd.Toronto, Ont.
Responsible for production co-ordination, order receiving & processing,quality control & HSE.

ADDITIONAL COURSES & CERTIFICATES
Team Building Course at Shell Pakistan Training Centre, Basic sectional training course Fire Fighting at Shell Head Office, Basic Sectional training course First Aid at same premises, Managing & leading successful teams by British council Karachi, Diversity & Inclusiveness at Shell Pakistan Training Centre, Basic Supervision Course by Pakistan Society for Training & Development,Candid Communication Workshop, Workshop on office HSSE, Competition Law Complaince, JDE Focal Point Workshop (purchase order processing system), Time management course, All at Shell Head quarter Pakistan.

In House LPG Courses attended in accordance with HSE:

- Basic technical product knowledge and manual handling technique.(SIPC module-1training program CD-2 ).
- Emergency response plan and HSE-MS (SIPC module-5).
- Bulk vehicle operations (SIPC moudle-6 / training program CD3).
- HSE competence major areas of concern HSSE policies, HSE-MS.
- HSSE work practice i.e work to permit system ERP/FF, product handling, occupational health/PPE and environment.

Attending workshops on WHMIS at Alberta Health & Safety Training Institute.

References: will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7901 to 7950 of 10884)

Go to Search Parameters...

Brief Description

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.

I am very much interested in Oil Gas Exploration.

I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment

I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.

More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.

Chartered Accountant with three years experience in Oil and Gas Industry

I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.

8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects

I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.

Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.

Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .

can apply any job which you think I am fitting for

I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications

I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.

Icorr paint inspector/rope access technician

Experice engineer with project engineering and project managemnt

Mechanical Engineer

working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.

To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.

Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area

All qualifiations are posted on my resume exept that i have a passport.

First Prev 151 152 153 154 155 156 157 158 [ 159 ] 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out