Resume - I senior completion and workover engineer 19 yeas experience

Misco Jobs

Resume #46341

CONTACT INFORMATION:
View contact information...

CAREER
Petroleum Engineer with 18 Years Experience in Production Engineering; mainly Field Operations, production operation, Workovers, completion, production testing, bottom hole pressure testing and Artificial Lift Design & optimiztion

OBJECTIVE
Progressive Position to Develop 'Analytical, Organizational, Presentational, and Leadership Skills Through Hard Work and Dedication.

PERSONAL
Marital Status: Married Place of Birth: Tahrhona -Libya
Nationality: Libyan Children: Five
Date of Birth: 1/1/1962

EDUCATION
1968 - 1978 – Elansar primary (6+4 years) School
1979 -1981 – Suk Eljuma secondary school
1982 - 1986 BSc. in Petroleum Engineering, Bright Star University, Libya

EXPERIENCE
Compagnie due Petroleum Total Libya (CPTL); Tripoli
June 2001 –Present - Senior Completion and Workover Engineer

Scope of Work: As a leading member of the workover, completion and testing Engineering Section, assigned to "Mabruk onshore and part time for Aljurf offshore fields", where various fields and reservoirs total a producing capacity of 15,000 BOPD for onshore and 40,000 BOPD for offshore.

Specific Duties: Selected projects include;

1. Planning, preparing, reviewing, recommending, and processing completion and workover programs. Following up and modifying the same during their execution, workover activities including:

- Complete new oil, water and injector wells
- Change artificial lift system (ESP, SRP and PCP) or optimization.
- Clean hole from sand and deposition.
- Follow up implementing stimulation jobs for Vertical and horizontal wells.
- Change injector string
- Restoration suspended oil wells
- Reactivate shut-in oil well
- Convert producer oil well to injector well.

2. Coordinating with Reservoir Engineering to determine adequate reservoir management policies. Accordingly, planning and activating field operations such as production testing, well logging, well stimulation, pressure surveys and well workovers.

3. Monitoring and evaluating field and well performances and providing management with engineering advice and reports.

4. Interpretation cased and open hole logs (CBL, VDL, USIT, corrosion log, GR, SP and RES.)

5. Designing and supervising treatment and remedial cement squeezes for repair leaks or improve casing bond.

6. Design and prepare stimulation and testing programs for vertical and horizontal wells, Evaluate well performance after treatment and issue conclusion and recommendation.

7. Follows up day-to-day completion and workover operations and provide technical advice and recommendation for the field wells-supervisor.

8. Supervision completion & workover operations at well location, provide technical advice and recommendation.

9. Select and design artificial lift systems for oil and water producers (Electrical submersible pump (ESP), sucker rod pumps (SRP) and Progressive cavity pump (PCP) for oil well based on swabbing and flow test results.
10. Evaluating Improve artificial system for optimization well productivity and artificial lift pumping efficiency, based on well pressure and influx.

11. Follow up implementation workover program, discuss and supervising well supervisor during operation.

12. Forecast material requirement for completion and workover (well head type, completion string, suitable artificial lift and surface control equipment).

13. Monitoring production & injection in water flood, miscible flood schemes, well completion, recommending candidates for workover and stimulation.

14. Prepare production equipment requisitions for future needs (wellhead, tubing, packers, tubing anchor, down hole and surface sucker rod equipment, down hole ESP and surface equipment and PCP down and surface equipment, also evaluate offers and issue recommendation.

15. Prepare call for tender for production equipment and services (Stimulation, cementing, wire line, slick line testing, sampling…...), evaluate offers and issue recommendation.

16. Prepare workover rig specification as per field requirement.

17. Prepare call for tender for select workover rig, evaluate offers and issue recommendation.

18. Prepare and supervise wire line activities.

19. Prepare workover rig inspection procedure, evaluate status of rig and follow up rig repair actions.

20. Forecast, preparing, and recommending capital, expense and workover budgets. Specifying and coordinating the procurement of related equipment, materials and services. Evaluating bids with recommendations to management

21. Member of production follow up committee

22. Prepare Statistical & Workover summary utilizing Microsoft Excel software.

23. Investigating discrepancies between actual production and well test rates.

24. Liaising with Drilling, Reservoir and Operations Engineering Departments for joint projects and activities.

VEBA OIL OPERATIONS LIMITED (VOO); Tripoli

- Jan 1993 - June 2001 Office Production Engineer

2. Design, Prepare and issue completion and work-over programs for vertical oil and water producer and water injection well including:
- Complete new oil, water and injector wells
- Change artificial lift system (ESP, SRP and GL).
- Repair casing leak.
- Clean hole from sand and deposition.
- Vertical wells stimulation and follow up implementing.
- Change injector string
- Restoration suspended oil wells
- Reactivate shut-in oil well
- Convert producer oil well to injector well.

3. Interpretation cased hole and open hole logs (CBL, VDL, USIT, corrosion log GR, SP, RES.)

4. Select and design artificial lift system for oil and water producer wells (Electrical submersible pump (ESP), sucker rod pumps (SRP) and gas lift system for oil well based on swabbing and flow test results.

5. Forecast material requirement needs for workover and completion (well head, completion string, suitable artificial lift, injection system and surface control equipment).

6. Prepare production equipment requisitions (wellhead, producing string equipment, also evaluate offers and issue recommendation).

7. Evaluate and assess well performance coordinating with other department for program implementation.

8. Liaises with service companies and contractors as applicable to field work requirement.

9. Prepare and supervise wire-line activities for various oil fields including perforation and logging.

10. Prepare and supervise slick-line activities for various oil fields including collect sampling and measure bottom hole pressure survey.

11. Prepare reports for presentation to management and present engineering projects and achievements at partner's meetings.

VEBA OIL OPERATIONS LIMITED (VOO); Tripoli

Jan 1990 - Jan 1993 Field Junior Production Engineer

Scope of Work: As a Field Production Engineer, assigned to VOO's Western Concessions. The area of responsibility comprised several oil fields with a producing capacity 40,000 BOPD.

Specific Duties:
1. Follow up, implement completion & workover programs activities in field, and supervise for operations including:

* Complete new oil, water and injector wells
* Change artificial lift system (ESP, SRP and GL).
* Repair casing leak.
* Clean hole from sand and deposition.
* Change injector string
* Reactivate shut-in oil well
* Convert producer oil well to injector well.

2. Design and request for work-over (wellhead, producing string equipment, artificial).

3. Quick look Interpretation for cased hole and open hole logs (CBL, VDL, corrosion log GR, SP, RES.)

4. Followed up the daily oil production activities and field pressure performances.

5. Prepared weekly and monthly reports.

6. Evaluate and assess well performance coordinating with other department for program implementation.

7. Prepare and supervise wire-line activities for various oil fields including perforation and logging.

8. Prepare and supervise slick-line activities for various oil fields including collect sampling and measure bottom hole pressure survey.

9. Responsible for operate and monitoring more than 50 wells which producing with naturally flow, ESP, GL and SRP artificial system, the capacity of these wells from 100 up to 5000 BLPD.

10. Operate and monitoring production station facilities and operate gas lift compressing system.

11. Design and troubleshoot of continuous gas lift operations.

12. Monitoring production, injection in water flood and miscible flood schemes, well completion, and recommending candidates for workover and stimulation.

Mobil oil Libya; Tripoli
March 1987 - Jan 1990 Junior Production Engineer

Scope of Work: Scope of Work: As a Field Production Engineer, assigned to VOO's Western Concessions. The area of responsibility comprised several oil fields with a producing capacity 12,000 BOPD.

Specific Duties:
1. Followed up the daily oil production activities and field pressure performances.

2. Prepared weekly and monthly reports.

3. Follow up, implement completion & workover programs activities in field, and supervise for operations including:

* Complete new oil, water and injector wells
* Change artificial lift system (ESP, SRP and GL).
* Repair casing leak.
* Clean hole from sand and deposition.
* Change injector string
* Reactivate shut-in oil well
* Convert producer oil well to injector well.

4. Assist for design and request work-over and completion equipment (wellhead, producing string equipment, artificial).

5. Quick look Interpretation for cased hole and open hole logs (CBL, VDL, corrosion log GR, SP, RES.)

6. Evaluate and assess well performance coordinating with other department for program implementation.

7. Prepare and supervise wireline activities for various oil fields.

8. Responsible for operate and monitoring more than 50 wells which producing with naturally flow, ESP, GL and SRP artificial system, the capacity of these wells from 100 up to 5000 BLPD.

SEMINARS AND COURSES
Date Location Course Completed
1988 Tripoli Drilling, Production engineering and surface facilities.

1988 Tripoli Water injection tech. Course. & Corrosion in Oil Industry

1992 Tripoli Drilling fluid.

1992 Tripoli Basic Computer operating
1993

1996 Tripoli

Canada Cased and open hole logs interpretation

Drilling Operations
Open and Cased Hole Logging
Well Completion and Design Application
Well Stimulation (Perforation & Acidizing)
Workover Operations
Production and Surface Equipment

2002 Canada sucker rod pumping design
2004 UK Electrical Submersible pump design

2004 Tripoli Well Completion, workover and stimulation
2004 Cairo Sucker rod and pump unit course and forum
2004 France- pau Being successful in completion
2005 Holland Land Workover rigs inspection

LANGUAGES & IT
Fluent in Arabic and English

- Microsoft office, excel, work and power point.
- Subpump (for design ESP equipment)
- SRpump (for SRP design)
- PI, DDR & Wellview (for database)
- Canvas (for drawing).
- MMS (for Material stock)

AFFILIATIONS
* Member, Society of Petroleum Engineers of A.I.M.E., USA
* Member, Chamber of Petroleum Engineers of Libya

REFERENCES
Are available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 10816)

Go to Search Parameters...

Brief Description

I am a Maximo Implementation and Upgrading Consultant.

A total of sixteen (16) years of working experience (thirteen years were in the oil/gas and petrochemical construction projects in the Gulf Region. A computer literate and proficient in oral and written English skills. Experienced in civil, building , steel structures, fire proofing and piping works

Oil and Gas Operations Mnagement

20 years experience in drilling operations

Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.

Reservoir Engineer specialized in Simulation

I have 33 plus years of maritime engineering experience. Over 18 years of this is offshore/oilfield/maritime experience as Chief Engineer, Maintenance Engineer. I have an ability to work safely and efficiently, without direct supervision, I use initiative to solve difficult problems and work well as

Thorough Knowledge of operation of Laboratory sophisticated instruments like XRF,GC,HPLC,UV Spectrophotometer, FTIR, MFR Tester, K.F titrator, Hunter Lab Colorimeter, Cast Film Extruder, Blown Film Extruder, Density Gradient Column, D.S.C, Capillary Rheometer etc.

M.E in Instrumentation Engineering with 17 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .

A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.

Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.

Posses degree in Geology. Familiar with Microsoft Work, Excel, Power Point, Project , Landmark Geosciences Workstation(Good), Petrel (Good), Well Kill Sheet Program(Good), Drill bit hydraulic software(very good), Mud logging software setup(good) and trouble shooting.

Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries. I have rich experience in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction

Mud engineer with 24 years of experience, on land and off shore, made all types of mud, OBM, SBM and WBM

Twenty-Seven years work experience primarily in Mechanical, Process Piping Design, Civil/GIS, CADD (Computer Aided Design Drafting) and CADD Management. Broad based as well as extensive expertise in Engineering Applications and Software Systems.

I am graduated from Algerian Petroleum Institute as an Enginer in petroleum geology (5 years graduation). I was involved in geological interpretation for prospect generation from 1995 to 2000, since then I have been focusing in geochemistry and basin modelling (1D, 2D and 3D) regional studies.

PROJECT MANAGEMENT

Quality, Health, Safety and Environment Manager - Offshore and Onshore

Free! Background and extensive experience in HES regulatory requirements through all stages of execution in major capital projects including Concept Design, FEED, Detailed Design, Construction / Fabrication and Hookup and Commissioning. Have 28 years of experience in the oil and gas industry which also i

Supply Chain and Procurement Management

Well Test Engineer

Experienced Professional Mechanical Engineer with 17 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.

Instrument engineer supervisor material control supervisor

Individual expert in Surveying - Topography - Land registration - Remote sensing – GPS – Cartography - GIS agreed by the European Commission

Visual Foxpro RDBMS Programmer LAN Environment / Technician / CAD 3D Designer

I am a Civil Engineer, Internal Auditor & shortly being certified as Lead Auditor by IRCA.

Results-driven manager in diverse supply chain, purchasing and sourcing areas.

Well Integrity Specialist, Completion Production Engineer

I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis

Oil Industry exp: 28 YRS, CITGO/Consulting Downstream/Upstream/Latin America/Pricing. Objective: Pricing Manager, Business Development Manager, Head Economics Dept., Refining(Tech/Fin), E&P(Fin)Invest. Bank.

1st class Mechanical Engineer from reputed Institution, preferably specialization in Thermal Power Plant, having PG Diploma in Thermal Power Plant Engineering from National Power Training Institute, Neyveli Lignite Corporation, TamilNadu.

EEHA and Hazardous Area Expert - Seeking FIFO - Remote Area Work

Administrative and Technical support Telecom, Electrical, Electronics and Instrumentation professional with 19 years of experience in India & Abroad, fast-paced environments demanding strong organizational, technical and interpersonal skills

Engineering Graduate with 19 years of experience in Sales & Marketing, Business Development, Operations, Supply and Distribution / Logistics, P&L Management of businesses involving Lubricants / Petroleum / Coatings offering Value added Solutions in Industrial, Power, Marine Segments

15+ years of various jobs with Foxboro DCS, and Triconex IPS/FGS Systems

I am a highly skilled Mechanical Engineer with over 18 years of experience in engineering (oilfield equipment, rotating equipment, wind energy) and general technology with PhD in Mechanical Engineering.

I senior completion and workover engineer 19 yeas experience

To further enhance career growth and inter-personal skills, To share technical knowledge with other colleagues, To take the challenge of having a wider responsibilities within a new organization.

An Oil & Gas Professional with 30+ years experience in all facets of Drilling and Completion

ISO 9000:2000 QMS-03 Lead Auditor IRCA Course No.17047 and Internal Quality Auditor (IRCA No. R141), Senior QA/QC Engineer, Certified Welding Inspector (CSWIP3.1), SNT-TC1A Level 2 for RT film interpretation / UT / PT and MPI, Piping, Blasting/Painting, Structural & Pressure Vessel Inspector. Expert

Rigging & Lifting Supervisor, Health & Safety Advisor, looking for work in the construction industry, freelance contractor

I am a Petroleum Engineering Technologist with 29 yrs E&P experience, the last 12 yrs have been with major Operating Companies in positions of; Lead UBD Engineer, UBD Project Manager, UBD Advisor and Drilling Supervisor. Available for a new project 30 Novembewr 2009.

20+ years piping field - 13+ years PDS

22 years oilfield experience. High pressure, horizontal pumpdown experience. Experience with both Open Hole and Cased Hole Logging and Perforating. 2.5 years overseas.

ISO 9000, ISO 14001, OHSAS 18001, ISO/TS 16949, TQM, SAP R3, FOURTH SHIFT, SPC

over 35 years expierence in piping design; AutoCad, VersaCad, Intergraph 3D piping

Integrity management engineer with world leading expertise

Corrosion and Metallurgy Engineer, Painting and Coating Inspector, Engineer, QA/QC Inspector, Manager

This is to express my sincere interest to apply to your company as Mechanical/Piping Field Engineer/Supervisor

I strongly beleve that I am a match for the position of Drilling Completion Engineer with any Oil/Gas organization , and that the beneficial will be mutual.

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out