Resume - Process Engineer with 6 years professional engineering experience in offshore oi...

Misco Jobs

Resume #4665

CONTACT INFORMATION:
View contact information...

DATE OF BIRTH: 10th June 1976
AGE: 27
MARITAL STATUS: Single
NATIONALITY: British

QUALIFICATIONS: BEng (Hons) Chemical Engineering (1994-1998)
University of Edinburgh

PROFESSIONAL BODIES: AMIChemE
COMPUTER SKILLS: Experienced in HYSYS, Pro II & Pro-Vision, PIPESIM and ESI process simulation packages.
Familiar with the HTFS TASC, ACX & ACOL heat exchanger rating program.
Dynamic anlysis using OLGA.

COURSES ATTENDED: Gas Conditioning and Processing (Campbell)
Control and Operation of Centrifugal Gas Compressors
Eutech Pressure Relief – a proven approach (IChemE)
MAPS – Offshore Safety and Emergency (Shell)
RGIT - Offshore Safety & Emergency Training Course
TRACS – introduction to Petroleum Economics

EMPLOYMENT HISTORY:

Genesis Oil & Gas Consultants May-01 – Present
Occidental of Oman May'03 – Sept'03
Talisman Buchan Alpha Offshore PIE Feb'02-Sep'02

Flow Assurance
Conoco UK Ltd – Brittania Satellite Project
Dynamic analysis of subsea tieback pipeline system for transportation of three phase fluids from a new field 28 km back to the Britannia platform. Investigation of cool down, thermal insulation requirements, start-up of gas cap were considered. Operability of the system and flow assurance in terms of potential for slugging during normal operation and ramp up were assessed along with terrain induced slugging mitigation techniques.

ExxonMobil - Nevis Central Flow Assurance Study
Transient Analysis of the new NCL well tied back to the Beryl 'B' platform. Analysis considered: Steady state operation of the flowline, shutdown & cool down, well ramp-up following an extended shutdown, slugging potential and mitigation.

BP - Forties Echo Subsea solution
Performed a series of steady state (PIPESIM) simulations for a subsea tieback to the Forties Alpha platform. The analysis assessed the sensitivity to gas lift rates, well location, minimum insulation. The study was then taken further to dynamically determine the slugging profile of the well(s). The production separator capacity was determined and assessed for the new well slugging requirements.

Shell - NAM Field Development Study
Thermal and hydraulic review of new subsea flowline transporting a subsea tieback to existing facilities.

CSO/SOEKOR - Sable Flow Assurance Study
Initial sizing and thermo-hydraulic analysis (PIPESIM) of the production, water injection and gas lift flowlines to and from a Bluewater FPSO offshore South Africa.

Operations Support
Talisman - Buchan Under-balanced Drilling Production Interface Engineer
The P.I.E was responsible for managing the interface between coil tubing drilling activities and production. This project was a world first. This offshore post required: Attendance and contribution to interface risk assessments during the planning phase, verification of newly installed circulation system prior to commissioning and co-ordination of the commissioning phase, Training of project personnel both onshore and offshore to ensure their understanding of interface procedures before commencement of project activities. Development of specific procedures when unplanned well operations required further flexibility.

BP CATS - Enhanced NGL Operation
Development and implementation of test procedures to operate the CATS terminal in enhanced NGL mode. Site engineer during the initial E-NGL trial period. Main responsibilities included close liaison with ops team, technical query interface and data recording/analysis.
Responsible for implementing a change in the operation of the heating medium system that released an additional 5MW of usable heat energy for the terminal.

BP Magnus - Revenue Improvement Exercise
Process Engineer for a Genesis initiated study into the re-optimisation of a North Sea platform. Responsible for remodelling the NGL plant (Turbo-expander) at off-design conditions. Performed assessment of the 4 stage compression train - compressors, scrubbers and inter coolers. Delivered conceptual report to client.

Detailed Design
Occidental of Oman - Northern Oman Gas Expansion Project
Process Engineer seconded to the NOGP engineering team in Muscat, Oman. The main objective of the NOGP was to monetise the stranded associated gas at the Safah, Wadi Latham and Al Barakah fields. A consequential benefit would be a drastic reduction in gas flaring at these sites.
As the process engineer in a multi discipline team I was responsible for the Glycol Dehydration and Refrigeration/Dew pointing packages. This involved equipment specification, vendor liaison, technical bid evaluation, package integration into the existing facilities and design & HAZOP reviews of the package. Due to the fast track nature of the project (project kick-off to first gas was 8 months) the project required close liaison with the package vendors.

Process Simulation / Plant Capacity Studies
AGIP - Hydrocarbon Allocation Review
Process Engineer responsible for allocation review of the Agip Balmoral facilities.

Mobil - SAGE Plant Capacity Study
Responsible for assessing available ullage within the gas processing train for the potential introduction of third party business. Duties included modification of plant simulation model, equipment capacity rating and introduction of excel link to HYSYS in order to model expander-compressor 'off-design' performance.
Performed a series of HYSYS simulations to model the SAGE/STE plant performance at increased gas throughputs.

AGIP - Kashagan Offshore Production Train Study
Process Engineer responsible for a sensitivity and optimisation review of a new production train to be installed in the Caspian Sea offshore Kazakhstan.

BP - Magnus EOR Pipeline
Hydraulic review of ullage within the EOR pipeline. The study concentrated on the introduction of 3rd party gas at a number of different sources within the system.

BP – Andrew topside capacity study for Cyrus tie-back
Review of topside capacity to aid in commercial decisions to tieback new subsea development.

Brown & Root Production Services
Shell Central ISC - Central North Sea Aug'00 – May'01
Conoco Partnering Project Oct'98 – Aug'00
Shell Anasuria FPSO – Operations Support
Responsible for screening ad-hoc offshore queries for seawater pipework (conifer) leakage, living quarters sewage system failure, plant instrumentation queries, swivel leakage.

Shell – Anasuria Sand breakthrough study
Responsible for Anasuria subsea & topside erosion study. Duties included: Liaison with external sand modelling consultants (AEA), identification and analysis of sand mitigation options for late field life, report generation including input to asset integrity program.

Conoco SNS – LOGGS Level control upgrade
Process Engineer responsible for the conceptual study and detailed design of a new level control scheme for several 3-phase separators. Responsible for investigation of all possible level measurement devices at conceptual stage. Complied FEED report making recommendations for the proposed level control scheme for each separator. Vendor liaison during conceptual stages to assess equipment suitability. Design work included preparation of PFD, P&IDs and Instrument datasheets, capacity review of separators, liquid outlet line sizing check.

Conoco SNS – Viking Safety case and well isolation procedures
Responsible for updating the Safety Case for two wellhead satellites. Reviewed change screen reports over four-year period. Took ownership of the documents and co-ordinated discipline input to relevant sections of "Installation Description". Interfaced with compliance body (DNV). Preparation of isolation procedures for wellhead satellites prior to and during simultaneous drilling operations. Start-up procedures for new side-tracked wells being brought on-line after work over period.

Conoco SNS – CMS Air-Cooler Operating envelopes
Process engineer responsible for CMS compression train air-cooler development study. Project work included: Heat Exchangers simulations on ACOL, Production of Interstage and Export Fin-Fan operating envelopes and validation of coolers for increased gas flowrates.

Conoco SNS – Viking BC2 Refurbishment
Front-end study into refurbishing of mothballed compression train BC2. Responsible for: HYSYS / HYSIM simulation of compression train, equipment list, Investigation into possibility of refurbishing LP vane pack scrubber for new flow profile (achieved). Performed compressor capacity study over 15 year flow profile using vendor-supplied compressor curves to identify future train bottlenecks.

General
Secretary for several HAZOP's including: Shell Halley subsea tieback, Viking ED sand management system, Viking BC2 compression train reinstatement, CMS compressor water wash. As-building of project P&IDs for a wellhead compression module (Viking ED). Offshore liaison with the vendor representative's involved with the leak-testing of the compression system prior to start-up. Responsible for trouble-shooting leak testing problems.

Sedco-Forex, Schlumberger
Maersk Vinlander – Northern North Sea Jul 96 – Oct 96
Offshore Roustabout. First hand use of the Permit to Work and STOP Safety program. Duties included: valve testing, fire extinguisher certification, painting and general maintenance work.

Sperry-Sun Drilling Services, Aberdeen
Formation/Evaluation Assistant Jun 94 – Oct 94
Summer job in the FE department. Helped with F/E tool maintenance, electronics testing & data retrieval, new tool-build and joint certification.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7651 to 7700 of 10903)

Go to Search Parameters...

Brief Description

Objective: It is my objective to become a contributing member of your company and further my knowledge and become a great asset to your company. I have experience with people and different countries and Cultures and plan on furthering my knowledge and skills with your company.

Process Engineer with 6 years professional engineering experience in offshore oil&gas industry on fixed & floating installations and gas terminals. Experience covers Conceptual and detailed design of equipment, debottlenecking studies, process simulation, plant modifications & Flow Assurance

Helicopter view, fast analysing, creative in finding solutions, mind setter for safety

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Mechanical Engineer,masters in Engineering Design,CATIA V5,SOLIDWORKS

Qualification: Diploma In Civil Engineering(3Years), Over 11 years experience in Land surveying, the majority of which has been spent gaining experience of Surveying works using modern surveying equipments and Surveying software.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

2D and 3D cad applications - upstream and downstream experience

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

Quality control, Inspection, Installation/erection of pipes and piping components, HVAc, HSE, Computer literate

DCS and instruments el.engineer.International experience.Experience in Chemical,mainly in Pulp and Paper (equipment-similar to used in Oil&Gas,Cement,Fertilizers,etc)Industry

My skill set includes Embedded systems,RTOS,vxworks,microcontrollers,embedded linux,device driver development(Block and Non Block),I2C,SPI,En50221,IEC,CAN,SAE J1939,Modbus,Canalyser,CAPLE scripts,embedded linux(2.6 kernel),MicroC OS,windows mobile os(WM6.1)

I have extensive experience in coal analysis, material distribution systems, combustion systems, power generation and all associated chemical processes

Mechanical Engineer with expereince in AutoCAD 2000, Piping, Welding, Installation and Erection Works, Production Plainning, Supervision

6 years experiance in Air seapration Plant

Mapping Specialist

B.Tech in Electronics & Instrumentation, working on under water hydrographic equipments

Looking for a MWD career

Skills: Tally, Daceasy, ATG (KSA), Digitek (KSA), Windows / MS Office & Tools etc.

Management skills & can drive a forklift

Handling of Benzene,O-xylene,Ethylene,Panel operation (SCADA),Jetty operation and ship Unloading

Scheduler, Primavera P3E & Expedition

Land surveying relating to boundaries, design, construction, and mapping.

Jouryneyman Millwright - Alignment Specialist - Lazer, Reverse and Rim& Face. I have installed and rebuilt steam and gas turbines, crushers,conveyors, ball and sag mills, tower mills, pumps, compressors, blowers.

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

Diploma in Chemical Technology working with BJ process and pipe line services as an operator having precommissioning and commissioning exp

Documents Controllers / Project Administrator

I have completd my Master's Degree in june 2005, previously I had B.com Degre, I am fully knowledged about the administrative techniques

Computers, customer/technical support, java, php, internet, web-design

A metallurgy n materials engineer with 3.5 years of experience in the field of Metallurgy, QA, Heat Treatment and Inspection & Testing. Worked with various international standards viz. ASTM, ASME, NACE, EN ISO and DIN, also well versed with customer specific standards like Aramco, Shell MESC etc.

Testing, Maintenance and Troubleshoot of Electrical,I.T.I in an Electrician

I have sound knowledge and hands-on experience in Pipe Inspection and Standard gauging practices. OCTG's, pup-joints, couplings, cross-overs and making-up of connection ends is my specialty. I will always deliver anytime and anywhere i am called upon and always keep abreast with latest technologies.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Over Three & half years experience in System Administration, Network Administration & System Management in Multinational Software Company & Industry. Good interpersonal skills, ability to work well and hard with multidisciplinary teams, got maximum exposure in MS Windows Systems Administration

Have 10 years experience in oil and gas / petro chemical process area, Hydrotreaters, Delayed cokers, Vacuum distillations, Frac. towers, Strippers vessels, etc.

Like learning something new. Almost 4 years experience in oil&gas and pharmaceuthical device company. Familiar with standards API, GPSA, ASME, NFPA, and program Hysys, Pipesim, Pipephase, Chemcad, Flaresim.

BS of Petroleum Engineer, with a Waterflooding Postgraduate of 2 years, I work with Ecplise and Grid, I made my own project by my own.

Mechanic, mechanical fitter, maintenance, vehicle mechanic, heavy mechanic, diesel mechanic

Chemist (BSc.) Analyst with a broad technical knowledge combined with outstanding leadership ability and creative problem solving skills in both strategic and tactic areas

My Graduation (B.Sc.) is in Mathematics and post graduation(M.Sc.) is in Oceanography. I have one year expereince in the field of Oceanographic research. Also I have cruise expereince of more than one month. I have basic skills in data processing and anlysis, Fortran Programming and other graphics .

Programmer

Fully qualified Project Manager for International Engineering projects

I am piping engineer having experience of three and half years. I have done piping stress analysisin CAESAR II software. I also have 3-D modelling exposure.

B.SC.Mech.Eng., Welding Eng., Project Manager

Skilled MSc ME, specialization Control Systems and Mechatronics

Proven track record of ten years in Senior Management pertaining to broad base Logistical Support, Marine Control, Supply Chain Management, Procurement, and Warehousing fields I have met exacting deadlines of delivery ensuring continuum of multi-million contracts.

1 year experience in CAD package - Unigraphics NX at General Motors.

First Prev 151 152 153 [ 154 ] 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out