Resume - My Nine years and Six months of experience , I have exposure in Power & Utilitie...

Misco Jobs

Resume #4671

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE
I wish to be a part of such an organization, where I can put to use my creative aptitude as my learning advances with the achievement of the organizational objective.

ACADEMIC PROFILE
B. Mech. Engg. (AMIE - Mechanical)
Bachelor's Degree in Engineering with specialization in Power Plant Engineering & Fluid Power Engineering, securing first class (63.3%) from the Institution of Engineers (India), Kolkata in June 2000.
D. E. (Mechanical)
Diploma in Engineering with specialization in the area of Power Plant Engineering, securing First Class Distinction (69.31%) from Dr. S & S S Gandhy Engineering College-Surat, Technical Education Board, Gujarat in 1993.

PROFESSIONAL EXPERIENCE

In Technical area, I have exposure in Power & Utilities. I have hands on experience for Gas Turbines, Steam Turbines, D. M. Water Plant, Plant & Instrument Air Package comprises of Dryer and Compressors, Raw Water Treatment Plant, Cooling Tower, and OSBLs.

In Management area, I have exposure in Maintenance Management System, Project Mgt. (Start Up & Shut down), Quality Management, DBMS, MIS & MCS - Reports Management.

Batliboi & Co. Ltd., Udhna, Surat, Gujarat

Apprentice Engineer (Production & Testing)
(From March 15, 1994 to June 12, 1991)

Worked as a Testing cum Production in-charge of Air Pollution Control department.

Reliance Industries Ltd., Village: Mora, P.O.: Bhatha, Surat - Hazira Road, Surat, Gujarat
(Since June 24, 1994)

Technical Cum Professional Exposure in Reliance Industries Ltd.

TECHNICAL

Power & Utilities
Have an experience Plant Operation for Gas Turbines, Steam Turbines, Air Compressors, Cooling Tower, Dimeralised Water Plant & Raw Water Plant.

DCS Operation
Have an experience of working on Mark - IV & V Speedtronic™ Control System for Gas Turbine Operations, Triconix Control System for Steam Turbine Operation DCS system Captive Power Plant.

Captive Power Plant & Utilities:
Power: Our total capacity is 292 MW, which comprises 7 nos. Gas Turbine of GE design Frame-6 having 30 MW capacity each and 2 nos. Steam Turbine condensing cum controlled extraction type of 40 MW each capacity.
Steam: Our total capacity is 965 TPH at 115 bar pressure and 515° C. Which comprises total 7 Nos. of Heat Recovery Steam Generation of capacity 125 TPH each and 1 no. Auxiliary Boiler having capacity of 90TPH.
RW Plant: Raw Water Treatment Plant capacity is 2200 M3/hr.
DMW Plant: Demineralised Water Treatment Plant capacity is 1800 M3/hr.
Compressed Air & Air Drying Units: We have 2 nos. of Centrifugal Compressors having capacity of 18000 NM3/hr each and 2 nos. of Reciprocating Compressors having capacity of 250 NM3/hr each. We have total 6 nos. of Air Drying Units.
Cooling Water: We have 3 Nos. of Cooling Tower having total circulation capacity of 65,000 M3/hr.

Process Optimization
Member of a Study Team for the Optimization of the Gas Turbines and Steam Distribution Networks, Heat Exchanger & Utility units for higher productivity and to minimize the heat loss.

Process Modification
Collection of Plant Performance data, feeding those data to the Computer and further analysis of the data to generate valuable information for critical decisions of management.

Health, Safety & Environment (HSE)
Exposure to various Permit Systems like, Permit To Work (PTW), Hot Work, Cold Work and Vessel Entry Permit.
Handled various instruments as a part of HSE System, like, LEL (Gas Detection Kit) meter and Oxygen meter.
Various Safety Audits, Inspection, Accident Investigation, Equipment / Instrument Failure Analysis Report, Process Modifications, Material & Heat Balance Calculation & Heat Transfer Operations Study, Process Flow Diagrams development & modifications
The job involves the responsibility for Planning & Implementing Efficient Safety Systems for Power & Utilities & development with an aim of achieving Total Safety Concept & Zero Accident Targets.
Various activities such as regular Health & Safety Management Audit (Based on British Safety Council Guidelines) & validation of all the Safety Systems.
Review of Field Change Orders (FCOs) for Plant Modifications in view of New Emerging Technologies for Safety & major hazards involved.
Carryout Root Cause Analysis of Failures (FARs) for the plants like, Injury, Leakage, Spillage & Fire incidents with a view to eliminate the Root causes of the Failures.
Hazards & Operability (HAZOPs) study, Pre Start Up Safety Review (PSUSRs)

MANAGEMENT

Project Management
Experience of Plant Erection, Commissioning, Start - up, Shut - down & Expansion activities in Gas Turbine, Compressors, Air Dryers, Demineralised Water Treatment Plant, Raw Water Treatment Plant.

Maintenance Management
Coordination with maintenance (Mechanical, Electrical & Instruments) staff as a part of isolation and restoration procedure of Preventive, Break down and Emergency Maintenance System.

MIS & MCS - Report Management
Plant Data Collection for raw material consumption and production of Steam, Power & Utilities.
Experience of various Reports Preparation as per the need of Management
Daily Reports, Weekly Reports (for Plant Performance Review meeting), Monthly Reports (for Monthly Performance Review meeting with Site President-Hazira), Management Representative (MR) Reports for ISO - 9002 & ISO - 14002 system, Safety & Environmental Reports

Quality Management
Active participant in the quality system management group for ISO-9002 & ISO-14002
Maintaining TQM & 6 ó criteria for Plant.
ISO implementation and compliance.

Data Base Management System
Software System for CPP & Utility Data Center is developed under my Project Supervision:
Back End: SQL Server, Visual Basic & ASP as a Data Interface media
The aim for development of this system is to keep eye watch on resource utilization in Hazira Unit.

ACHIEVEMENTS:
In Reliance:
Gain hands on experience on latest Process Control Techniques of Distributed Control System.
Handled Plant Emergency and restoration of plant process.
Gain knowledge of Quality Management Development.
Acquired adequate knowledge of Water Chemistry, which was required for the activities of the Plants on a self-interest.
Acquired knowledge of Health, Safety & Environment related to Hazardous Industries.
Acquired adequate knowledge of Permit to Work (PTW), Hot & Cold Work Permit, handling of explosimeter for LEL & UEL checking.
Development of Software System for CPP & Utility Data center.
Along with the job, I have completed my Graduation in Mechanical Engineering.

KEY PROFESSIONAL TRAINING:

Five days Training on "Gas Turbine Performance & Simulation of Combined Cycle Power Plant" at National Thermal Power Corporation (NTPC - Kawas), Hazira.
Five days Training conducted by BGGTS (BHEL-GE Gas Turbines) on "Mark V Speedtronics™ Control System" at Reliance Petroleum Ltd. - Jamnagar
Attended HSE Refresher Training on an annual basis.
Two days training on ISO 9000 QMS.
Four days Training on Supervisory Development organized by Baroda Productivity Council.
Three days Training on "SIGMA FINE" software for the complete balance of Resources and Final Products as well as Utilities, Fuel and Heat Balancing for Optimization of Plant Performance.

PROJECT REPORTS:

Bachelor's Degree in Engineering (AMIE - Mechanical Engineering)
Title: Gas Turbine Operation Philosophy.

COMPUTER PROFICIENCY:

Operating Systems: Win-3.11 / 95 / 98, MS - DOS 6.22, Windows XP
Database: MS Access, MS Excel
Packages: MS Office (Word & PowerPoint), MS Project
Languages: Visual Basic 6.0
Engineering Software: SIGMAFINE
Office Management: Lotus Notes
Internet usage: E-mail, Surfing & usage of Search Engines

PERSONAL DETAILS:

Date of Birth: 19th Nov '1975
Gender: Male
Blood Group: B + ve
Nationality: Indian
Native: Surat
Marital Status: Married & One Daughter
Languages known: English, Hindi, Gujarati (Mother Tongue)

PROFESSIONAL REGISTRATION:
Associate (AIE) of The Institution of Engineers (India), Kolkata

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4551 to 4600 of 9785)

Go to Search Parameters...

Brief Description

Automation Engineer- PLC ,SCADA programming and Electrical Engineering

Welder

Electrical Mainteance & Repairs HND Elecct/Elect, City&Guilds Level 4 London (HNC/B.TECH.)

Mud engineer, drilling fluid engineer,computer skill, etc...

My career objective has always been to contribute my education and engineering skills within a growing and dynamic organization.

Geosteering, Exploration, Development, Wellsite

Bachelor Degree in Metallurgical and Materials Engineer in Brazil. I have 2 years experience working with quality inspection in a maintenance Company for Oil/Gas Industry, also 4 years of experience in laboratory on materials testing and characterization.

25 years experience in Planning/Project/Detailed Engineering of Oil and Gas Plants, Petroleum Refineries and Petrochemical Plants

I am Electronics Automation Engg. I am design Hardware&Software of Project

Total 6½ of years experience in the field of power plant and GOC in various projects. Preparation of GA and preliminary piping layout with Design principles, creation and review of P&ID’s, Review of vendor information, review of contracts with respect to system description, highly proficient using I

Equipment operator/open-cased hole operator/driver-commentary task assessment trainer.

Electronics and Instrumentation Engineer

Static equipment design engineer with 4 yrs. experience in design also handled coldbox, surface condenser package items willing to work overseas

3 yrs diploma in mechanical engineering and have 7 yrs experience in operation and maintenance of DG sets & auxilliaries like compressors,WHRB,pumps etc

AB PLC , Siemence PLC Safety PLC

B.sc Geology, Msc Environmental Control and Management,. Self motivated ,dedicated, innovative creative team player with a high sense of responsibility. excellent communication and computer skills

Chemical Engg with 4 yrs experience in Design, R&D. HAve exposure to INPLANT, PIPENET, ASPEN, HTRI

Advanced SCADA Application Specialist, design, commissioning and training

Knowledgeable in PDS, Microstation, SPR, AutoCAD and Caesar II.. Good Communication Skills.. Consistent President of the Class.. From JGC Corp

Being HSE officer for the site (Ahmedabad) involved in the preparation and execution of Emergency Management System for the sites. (Documentation, Displays, Training, Information to External Agencies, )Carrying out Safety Audits, Monitoring of implementation of punch points and reporting etc.

Automation Engineer, I have worked in different company for electronic devices and actually in Oil and Gas field us an engineer automation for DCS and Safety syetems, for more details Plaise see my CV here.

Construction Administration/Project Controls

I am looking job in instrumentation field as instrument SUPERVISOR/INSPECTOR/SR.TECH

Planning and scheduling, Project and Maintenance

Paramedic/Offshore medic with 19 years experience in Oil, Gas & Renewable Energy industries

seismic interpreter with a strong background in petroleum and structural geology, gained through working on a wide range of fields in different structural settings in the Syrian Euphrates Graben area. A skilled user of the Geoframe and OpenWorks software suite. Completed seismic interpretation

I am a Mechanical Engineer having Post graduation diploma in power plant ,working since Nov'02 in the field of power plant execution

5+ years production and design experience in refinery, PDS, PROCAD, Microstation, AUTOCAD,LDT

Process Engineer

Deepstrip rectification, in-depth examination, non-destructive testing, fault diagnosis and post installation testing of gas turbine engines

I have 34 yrs Crane Operator experence, 4 yrs Crane, Rigging, & Mechanical Trainer experence. I have offshore crane operator exp. and onshore crane operator exp.

CSWIP – 3.1 welding inspector certified from TWI,All stage wise QC related activities for the fabrication and installation of pipeline, piping and structural for offshore platforms and other related works

Senior Estimator Available to work in Indonesia, Malaysia, Nigeria, Kazakhastan, Thailand

More than 13 years of working experience with Major Oil & Gas Industries for their Documentation with responsibilities in Technical Documentation, Library system, Supervision, Administrative, Vendor, Procurement & Project Management etc.

Total 16 Years of diverse experience in Piping/Mechanical design of Refineries, Chemicals, Petrochemicals, Fertilisers Plants. 5 years experience in Operating Refinery of KNPC. 9 years of cosultancy (EPC) experience. 2 years of Piping design & construction experience.

Seven years of experience in oil and gas upstream industry as geophysicist. Currently involved in exploration & development of a deep-water lease in East Coast of India with multiple play/prospect (gas) discovery identified by 15 successful exploratory wells.

Over ten years of experience in the field of Electronics and Computer Engineering

Instrument design engineer in BHEL (Bharat Heavy Electricals Ltd), Hyderabad, India in Control & Instrumentation (C&I) department in Steam Turbine, Compressor & Gas turbine Engineering division. DNV certified HSE lead auditor

Since 1995, I have worked as a Planning Engineer / Maintenance Planner in Oil & Gas Industrial, both on offshore and onshore terminal, worked for ARCO, BP and CNOOC companies. Response for Opertioans and Maintenance work activities, good at CMMS-MAXIMO, MS Project, P3 Project Planner.

Completions/Production Engineering Experience

working in Malaysia ( far east) from 3 and 1/2 yrs. Looking for jobs in oil & gas fields . In field operators or panel operators position with better salary as a long term contract basis preferable in far east or middle east.

I am a degree holder in Mechanical Engineering, having more than 13 years of experience in various types of Refinery and Petrochemical project.

Cost Engineer with exposure to Planning. Russian-mother tongue. English - fluent. Arabic - working knowledge

13 Years Strong Experience & Exposure in The Arena Of I&C Systems Successfully handled numerous large scale projects Worked with SCADA, PLCs and DCS Strong at commissioning, testing, documentation and handling of O&M Effectively led teams to deliver positive and timely results

13 yrs Professional Exp.which include Project Management, Engineering and Estimation. Responsible for the Implementation of QMS(ISO9001-2000). Countries of Work Exp: India,Singapore,UAE Languages Known:English,Hindi,Kannada,Tamil & Telugu.

I try to get better conditions and get better live with my skills and competency

My Nine years and Six months of experience , I have exposure in Power & Utilities. I have hands on experience for Gas Turbines, Steam Turbines, D. M. Water Plant, Plant & Instrument Air Package comprises of Dryer and Compressors, Raw Water Treatment Plant, Cooling Tower, and OSBLs.

Sap Basis consultant with 1.2 years of experience

Stability Analysis, Motion Analysis and Mooring Analysis of Ships and Offshore Structures

+1 YEAR EXPERIENCE IN PIPING DESIGN CURRENTLY IN DUBAI

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 [ 92 ] 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out