Resume - Senior technician instrument

Misco Jobs

Resume #46731

CONTACT INFORMATION:
View contact information...

Free of the Military draft and all engagement I-TRAINING
my schooling its bac+3 years
1-bachelor in electronic1990
2-DEUA in electronic option industrial control 1995(diploma academic study apply)annaba university
3-training for DCS system SAIA and bohimia instrument in Czech republic
4-trainaing for DCS system for siemens materiel schematic S7-400
II-1PROFETIONNAL EXPERIENCE
09 years working as senior instrument technician option automat and control in thermic power plant with 2*137 MW in maintenance department in sonelgas( Algerian company of electricity and gas) (1998 to the present )
II-2TASK OF WORK
-Calibrate all instruments transmitter analog and digital.
For analog transmitter:
* flowmeter, pressure, temperature, level, differential pressure for flow or level, and thermostat Of control temperature good knowledge all sensor of temperature type K?J,T……pt100,Rtd
CONTROL TURBINE AUTOMAT:
*good knowledge DCS system MARK6 and Honeywell bohemia(skoda)
*good knowledge benthly Nevada profess ad schunck for machine motoring system
*control daily for DCS system and mark6
*control the reliability of sensor, valves and module
* Control oil lubrication (temperature and filter)
* Control power generator in comparison with steam flow
*Control temperature of generator and hydrogen control differential of temperature metal turbine HP,MPand LP
High pressure, medium pressure and low pressure
* System Modular Redundancy (TMR *control hydraulic,pneumatic valves if it's doubt position or an break Dow system
Adjustment all sensor of vibration saff or absolute vibration and control measure line between Bentley Nevada and mark 6
Control speed and over speed of turbine
Familiar with Programmable Logic Controller (PLC) CONTROL BOILER
In control boiler it necessary to control some measure line:
Control combustion: flow gas –flow air
Control level for cover warmly
Control temperature steam
Control flow water in comparison with flow water and flow gas
Control reliability for DCS system soft and hard
- Maintenance, troubleshooting and repair gas and steam turbines instrument such: bohemia Mark 6 and SIEMENS DCS and skoda Bentley, Nevada, Honeywell and rozmoond transmitters, analyzer hydrogen system's and instrument of water post.
- Install all instrument and check and control all physical parameter and their sensor (level, pressure, flow, temperature, vibration and rotational speed) calibration, troubleshooting, repair.
-Ability to Interpret design/drawings, -Install, dismantle, troubleshoot/analyse calibrate, modify, all electronic/pneumatic/hydraulic open and closed loop control systems. -Senior instrument analyser
I'm working also in chemical process for treatment's water such as:
-Electrolyser for hydrogène
-Analyser for oxygen in combustion room
-silice meter
-Conductivity meter
II-3PROFETIONNAL EXPERIENCE -1995/1996 electrician in LNG sonatrach (Algerian company of gas) work task install all instrument and DCS
II-4 TASK OF WORK -Ability to Interpret design/drawings, diagram -Install, dismantle, troubleshoot/analyse calibrate, modify, all electronic/pneumatic/hydraulic actuator, activer and positioner III- VARIOUS -Good inter personal team
-apt to work in astreint system
-Apt to work in anther regime
-Dynamic for find and repair all problem
Knowledge in Computer Applications
- Microsoft Word
- Microsoft Excel
- PowerPoint
Language Skills
- French: writing, reading (freelance).
- English: writing, reading.
- Arabic: freelance.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3951 to 4000 of 9788)

Go to Search Parameters...

Brief Description

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

am a recent graduate oil &Gas Engineer based in Aberdeen,uk. I am looking for a challenging and interesting opportunity anywhere preferably in the Middle East. I am fluent in English. Interested in exploration, Drilling, and Reservoir Engineering position. Available to start any

work in instrumentation,automation,PLC in industrial environments

Process engineer with 5 year experience working in the refining and oil & gas industry. My most recent (and current) position has provided me with overseas experience for an oil producer American company.

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Directional Driller

Rotating Equipment Engineer

Rotating Equipment Engineer with 5 years experience in Refinery and Oil and Gas jobs

Working knowledge of Allen Bradley PLC-s, turbine, generator and auxiliary equipment including their interfaces to the control system, Foundation Fieldbus network

Piping Design

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Well-experienced instrument senior technician seeking a motivating position related to Construction, Commissioning and Maintenance applicable to industrial and OIL&GAS installations.

Offering Extensive Experience in Industrial Electrical/Instrument Equipment

Free! Field Manager/ Operations Supt. with experience managing international oil/gas projects.

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

Good knowledge of Environmental Impact Assessment (EIA), HAZOP, Risk Assessment, Safety Audit, Environmental Audit, & Various Safety Techniques Like; International Safety Rating System (ISRS)-By DNV, Process Safety Management (PSM) etc.

28 years experience in drilling fluids onshore and offshore across 4 continents. Fully experienced in both field engineering and office supervisory/management posts. IWCF Combined Surface/Subsea Supervisor well control certificate.

Graduated Mechanical Engineer,Certified Caterpillar Engineer, Experience as a Field Engineer in the Gas & oil, Marine,Mining Industry

Working experience in Chemical plants with private sector and foreign organizations. Worked at ¡§Honeywell DCS TDC 3000¡¨ controlled Urea & Ammonia plants, FFC and ¡§Foxboro DCS¡¨ controlled Urea plant, Indonesia.

I know I would be the correct candidate because; I have never met a challenge that I could not solve, resolve, or find a solution to in an accurate and timely manner. I am a quality engineer with over 15 years experience in the automotive field alone.

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

Geophysicist. Current area - Exploration Seismology. Strong experience in Geophysical Data Processing, Theory of Polarization Anomalies, Numerical Modeling.

* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.

opweration, commissioning,refinery, LNG unloading, termonal operation, plant operator, refinery operator,

Title research and Ownership Reports, Deed Plotting and Runsheet Preparation

Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor & Project Manager

Well Operations Manager / Superintendent

Long experienced man, good language skills, oil field experiences and certified as a radio officer, ready to work in the worldwide.

SAP HR Implementation, Recruitment, Training, Compensation Management, employee Relation, Performance management

A chemical process engineer with 12 years experience in oil refining and petrochemical industries

Has served as Supervisor (Mechanical) during shutdown in KNPC, Kuwait and FERTIL, Abu Dhabi. Has experience in the maintenance of Rotary Machinery like pumps, compressors, turbines, etc. and stationery equipments like heat exchangers, columns, vessels and piping. Has computer knowledge.

Skilled in all planning shutdown, shutdown supervision, servicing, modifications design and total project cost control, mainly in power stations and refineries

Pipeline, Pipe Stress, Piping or MEchanical Engineer

Process Design & Review , Review P & ID’s , Computer Programs (Excel, Word, PowerPoint), Training The Junior Process Engineers & Process Technicians

A professional electrical engineer; more than eight years of active experience in electricity sector of Pakistan in controls, protection, SCADA. BSc Elect. Engg.; MSc Controls; MBA. Has also worked in Northern Electric plc, UK. Technically competent; has ability for business and financial analysis.

OBJECTIVE A challenging position in managerial level QUALIFICATION FOR THE JOB Good education and fully experienced with engineering and management duties,, have initiative and willing to accept engineering responsibilities.

: PROJECT ENGINEER //SENIOR ENGINEER /ELECTRICAL -- ENGG./(DESIGNS)/PROC./CONSTRUCTION/SUPN./O & M OIL/GAS/PETROCHEMICAL INDUSTRIES ETC.

12 yrs exp in Chemical Industry . strong academic background B.E. Chem +ICWA+LLB+MM (AIM, Philippines) seeking for a suitable opening

cnc turn mill machinist setter

JR. PDS DESIGNER PIPING WORKING FOR WELLCOMPANY IN MUMBAI ON PDS FOR PIPING. GOOD EXPERIANCE OF PIPING.REFER DETAIL BIODATA.

This is the Drafts man C.V for Zueitina Oil Company, Libia.

Please see attached cv regarding your procurement requirements

PROCESS ENGINEERING OF OIL AND GAS PROJECTS

OBJECTIVE To secure a position with a corporation wherein I can apply the skills, knowledge and expertise obtained during my 18 years in the Health & Safety and Emergency Response fields.

Well Services Engineer/Supervisor

Highly skilled hydraulic engineer with 12 years of experience in the field of producing energy, maintenance , commissioning and start-up operations within multi millions contracts. Knowledge and experience in working with international teams.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 [ 80 ] 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out