Resume - Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine),...

Misco Jobs

Resume #4683

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

Personal data:

Date of birth: 14 – 02 – 1974
Place of birth: Abu-Dhabi
Nationality: Egyptian

Military Status: Exempted
Marital Status: Married – Two child

Education data:

Degree: B.Sc. in geology & geophysics faculty of Science, Ain Shams Univ.
Grad: Good

Experience data:

* Project Leader in Petrologic
Cairo Egypt from 11/2003 till present
Main job is Seismic Processing Analyst
The main Projects 2D, 3D (land &marine), AVO
All Projects works include; pre-stack processing, post-stack
Processing, and migration, Velocity Analysis AND build modules, finalizing these projects by writing the processing reports the most projects done in Cairo.

* Project Leader in WesternGeco, Cairo Egypt from 7/1997 – To 10/2003
Main job is Seismic Processing Analyst
The main Projects 2D, 3D (land &marine), AVO
All Projects works include; pre-stack processing, post-stack
Processing, and migration, Velocity Analysis AND build modules, finalizing these projects by writing the processing reports The most projects done in Cairo. two projects in
Abu_Dhabi (From 1-10-2000 to 1-1-2001).

* From July1997 Till June 1998 in The Processing Of 2D Marine Project in The RED SEA This Project include ; pre-stack processing, post-stack Processing, and migration, Velocity Analysis

* From June1998 Till January 1998 in The Processing Of 2D Marine Project in The West Delta include ; pre-stack processing, post-stack Processing, an This Project d migration, Velocity Analysis

* From January1998 Till June 1999 in The Processing Of 2D Land Project in The South Dabaa & 2D Land Project in The Abu Dhabi both include ; pre-stack processing, post-stack Processing, and migration, Velocity Analysis

* From June1999 Till January 2000 in The Processing Of 3D Marine Project in The ABU QIR This Project include ; pre-stack processing, post-stack Processing, and migration, Velocity Analysis AND Included AVO study.

* From January 2000 Till June 2000 in The Processing Of 3D Marine Project in The North Alex This Project include ; pre-stack processing, post-stack Processing, and migration, Velocity Analysis AND Included AVO study & Picking Velocity

* From July 2000 Till September 2000
In The Processing Of OBC Project in The Gable El-Zite
This Project include ; pre-stack processing, post-stack
Processing, and migration, Velocity Analysis

* From October 2000 Till January 2001
In The Processing Of 2D Marine Project in Qatar ( Abu- Dhabi Center) This Project include ; pre-stack processing, post-stack Processing, and migration, Velocity Analysis

In The Processing Of 2D Maine Project in Abu-Dhabi This Project include; pre-stack processing, post-stack Processing, and migration, Velocity Analysis
* From January 2001 Till March 2001
In the Processing of 2D Land Project in Pakistan This Project include; pre-stack processing, post-stack Processing, and migration, Velocity Analysis

* From February 2001 Till June 2002 in The Processing Of 2D Marine Project in The Mediterranean Deep Marine.
This Project include; pre-stack processing, post-stack Processing, and migration, Velocity Analysis
* From June 2002 till October 2002 in the Processing Of 2D Land Project in the Pakistan This Project Included
Pre-stack time migration & Picking Velocity

* From October 2002 Till now in The Processing Of 3D Land Project in the Dubai This Project Included Pre-stack time migration & Picking Velocity

* From July 2003 Till October 2003 in The Processing Of 2D Land Project in the Yemen This Project Included pre-stack processing and migration & Picking Velocity

* From Nov 2003 Till Now in The Processing Of 3D Marine Project in The ABU QIR & North Alex This Project include ; pre-stack processing, post-stack Processing, and migration, Pre-stack time migration, Velocity Analysis AND Included AVO study

All Projects include; pre-stack processing, post-stack
Processing, and migration, Velocity Analysis AND build modules, finalizing these projects by writing the processing reports.

Training Courses:

1. 31-8-1996 Training with Repsol Exploration Egipto.
2. 29-9-1996 Training with Petrobel.
3. 12-9-1997 Basic Omega (soft ware).
4. 12-9-1997 Basic Uinx (soft ware).
5. 19-8-1998 Quality Assurance system workshop.
6. 27-5-1999 Basic geology &geophysics.
7. 28-7-1999 HSE
8. 23-9-1999 intermediate 3D Omega.
9. 2-12-1999 Seismic data processing concepts.
10. 20-2-2001 Safety Driving.
11. 23-3-2001 Q.C.
12. 10-8-2001 Depth Imaging.
13. 10-10-2001 Seismic Exploration.
14. 28-4-2002 Seismic Sequence Analysis.
Computer Skills:

1. Word.
2. Excel.
3. Power Point.
4. Unix
5. Promax
Language ability:

* Arabic mother language
* English V.good ( reading & writing & Spoken)

Hobbies:

* Travel
* Reading
* Swimming
* Diving

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6751 to 6800 of 10819)

Go to Search Parameters...

Brief Description

I have a stable work history having spent four years working as a Mechanical Engineer within the Teyseer Group in Qatar. I have a broad range of experience including project management, site and field works, tender preparation, etc. On Sep 2004, I graduated as a Petroleum Engg (Masters Degree).

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

I’ve been working in overseas since 1995 with experience on EPC (oil/gas/petrochem/power/desalination plant, etc.), piping field engineering and construction management/supervision (coordinator, construction, turnaround, tie-ins, revamp/maintenance, field engineering, punch list, test pack, spool ch

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

Piping design engineer having 4 experience in ,PDS,CADWORX 2008 AUTOCAD 2008.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 [ 136 ] 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out