Resume - Process engineer / production supervisor in oil/gas/petrochemical company.

Misco Jobs

Resume #47662

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Process or Production Engineering (chemical) position in oil and Gas Company and Petrochemicals Company.

PROFESSIONAL EXPERIENCE
PT. Styrindo Mono Indonesia (Ethyl Benzene & Styrene Plant)
Process/Technical Engineer 2001 – Now

Scope of Duties:

1. Monitor plant and process equipments performance, provides technical service to other departments on a regular basis. Includes identifying problems and submitting reports with recommendations for a reliable and safe solution.
* Unit consumption
* Efficiency of furnace, compressor, pump, etc
* Deactivation rate of catalyst of dehydrogenation, alkylation and transalkylation
* Heat transfer coefficient of low velocity heat exchanger
* Performance of cation anion exchanger resin
* Performance of adsorbent on IA drying unit
* Etc

2. Provide trouble-shooting service for potential problems. Includes studies related to process problems, preparing test programs, analyzing results and submitting recommendations for solutions or presenting his findings and conclusions to parties concerned.

3. Review routine test and analysis results from laboratory, identifies and analyses deviations and unusual trends, interprets reasons in terms of operations and submits conclusions to Production Department.

4. Define a project or optimize unit operation to save energy and reduce operating cost.

5. Assigned to a task force to work on a project.
* Engineering requisition
* Bid evaluation
* Vendor document review and delivery
* Construction
* Commissioning or performance of equipment

6. Reviews and proceed management of change of feedstock, chemical, catalyst, operating condition, including modification or new equipment or minor changes initiated by our department and or other Departments and recommends approval or suggest alternative solutions. Continue to monitor modifications from conception through to commissioning. Basis for the change are process improvement, operability improvement, reliability improvement, cost reduction and health/safety/environmental.
* Feasibility study
* Process design definition
* Process engineering check to ensure that design standard are being maintained
* Technical safety requirements are met
* Design is to recognized industrial standards and codes
* Materials comply with company standard
* Plant trial program
* Hazops
* Pre-commissioning check on the completed work to ensure the design is to original proposals
* Responsible for discussing any comments or queries arising from the approval issue of the modification package
* P&ID updating

7. Prepares P&ID for HAZOPS and introduces the proposal to HAZOPS committee for Hazard and Operability Study. Takes an active part in HAZOPS proceedings as a process specialist. Acts as secretary to the HAZOPS meetings and action of HAZOPS findings.

Technical Saving Cost Project:

* Ethylene Feed Gas Online from CAPC, 2006~2007
* Fuel Conversion Project I~III, 2005~2007 (Fuel Oil Blending Facility, New Coal Boiler Installment, Conversion to Natural Gas)
* BTM Tank Rearrangement and Relocation of EB Feed Pump, 2005
* Install MS transfer line from PP1 to PP2, 2005
* Condensate Recovery from No.1 Plant EB-1 Unit, 2005
* EB Direct Feed at No.1 Plant, 2005
* Installation of Demineralization Unit at No. 2 Plant, 2004
* Replacement N2 Liquid to N2 Gas as N2 Back Up, 2004
* Styrene Monomer Plant Revamping Project, 2002
* DM Line Interconnection Between SM1 & SM2, 2001

Technical Process Modification:

* Upgrade Material for 2EA-407 (EB Recovery Column Condenser), 2006
* Relocation of NaOCl Injection Point, 2006
* Connecting Demin-1 Outlet to 2FB-710 (water tank of Demin-2), 2006
* Permanent Injection Line for EC-1108A (New Polymer Inhibitor), 2006
* Changing Valve & Install Flow Indication at BZ Diverting Line, 2006
* ERP2-Flow Meter for Replacement and Additional, 2005
* Relocate Tar Rundown Line to FB-693, 2005
* Install Flow indication at Outlet of Air Dryer (FF-861 & 2FF-861), 2005
* Replace and size up CCW line to jacket GB-301, 2005
* Transfer line from FB-302 to PP2, 2005
* Install flow meter at FA-303 blow down line, 2005
* Material upgrade of EA-312 from CS to SUS 304, 2005
* Establish Permanent Facility for EC-3335A, 2004
* Install Oil Transfer Line from IDO Pit Separator to CPI EB-1 Plant, 2004
* Material Grade Up of EA-411 (SM Product Cooler), 2004
* Replace Sampling Cooler SC-402, 2004
* Cutting Concrete Wall of Check Pit, 2004
* Recycled Benzene Treatment at No.2 Clay Treatment, 2004
* New open ditch at 2BF-600 area, 2004
* Additional steam trace at LPG line to 2BA-201/202/203, 2001
* Pressure Gauge for Monitoring 2GA-500A/B Suction Line, 2001
* Modification of ethylene sampling line (2SI1-501), 2001

Technical Report:

* Dehydrogenation Catalyst of No.2 Plant SM Unit for next SDM, 2006
* Economical review of re-operating desalination unit
* Review of using nitrite base chemical at cooling water system
* Review of activated alumina Alcoa F200 on IA drying unit
* Change of corrosion inhibitor type in cooling water system from molybdate to nitrite base chemical
* Performance test of new TBC product
* Investigation of low PH at demineralization unit product
* Hydrazine replacement in boiler water treatment
* Feasibility study to increase ratio of PA to N2 in the blanketing gas of Styrene tank
* Feasibility study to stop one of air compressor
* Vendor Selection for Coal Loader, 2006
* New Coal Boiler Installation, 2005
* Unloading/Loading Catalyst Activity at Dehydrogenation Reactor ASDM 2005
* Countermeasure for corrosion problem at low velocity heat exchanger, 2004
* Dehydrogenation catalyst of no.1 plant SM Unit for next SDM, 2004
* Unloading/Loading Catalyst Activity at 2DC-101/102 ASDM 2002
* EBZ-500 Catalyst Regeneration (Final Study), 2002
* Tonsil 616 GL Performance evaluation, 2002
* EBZ-500 Catalyst Regeneration (Toward 120% capacity after revamping project 2002), 2002
* 2DC-201 Performance Evaluation, 2002
* Estimate quality of ethylene loss for purging 2GA-500A,B suction line, 2001

HSE Management:

* Member of ISO & SMK3 Auditor Team
* Safety & Lost Prevention Representative
* HAZOPS for Demineralized Water Project 2004
* HAZOPS for Fuel Blending Facility 2005
* HAZOPS for New Coal Boiler Installation, 2006

PT. Styrindo Mono Indonesia (Ethyl Benzene & Styrene Plant)
Production Supervisor 1994 – 2001

Scope of Duties:
1. Operating different plant units and or process equipments in utility area and process area with high standard of quality and safety.
* Boiler
* Air compressor
* IA drying unit
* Cooling tower
* Cooling water system
* Desalination
* Demineralization unit
* N2 generator
* Tank Yard system
* Chilled water system
* BOG system
* Pump
* Compressor
* Furnace
* Column distillation
* Reactor
* Heat exchanger
* Etc

2. Understanding control board instruments to indicate, record, and control process variables.
* Dealing with DCS system
* Cascade control
* Tuning controller

3. Preparing standard operating procedure of process equipments operation manual as guidance operator to operate and trouble shoot the process equipments.

4. Preparing schedule of annual shutdown and idle shutdown

PT. Bening Khatulistiwa (Waste and Water Treatment Consultant) 1993 – 1994
Technical Service Engineer

* Re-establishing and enhancing positive relationship with all customers.
* Having knowledge of water treatment chemicals: PH controller, oxygen scavenger, scaling inhibitor and anti foam.

PT. Badak NGL Company (LNG Plant) 1990
On The Job Training

* Condensate recovery unit
* Mercury removal
* Carbonat & DEA system
* Dehydration
* Scrubber system
* Liquefaction

EDUCATION
Bachelor degree in Gas and Petrochemical Engineering, 1986 – 1992, University of Indonesia.

TRAINING
* Management Training Series "Workshop-KAIZEN", July 2005.
* Management Training Series "Workshop-Management of Change", November 2004.
* Management Training Series "Changing & Innovation", October 2004.
* Safety Training Series "Incident Report & Investigation", September 2003.
* Computer Training Series "AutoCAD 2000", May 2003.
* Process Simulation Software Training Series "Chemcad 5.2", April 2003.
* Safety Training Series "HAZOPS & Risk Assessment", April 2003.
* Computer Training Series "Networking & Database System", March 2003.
* Safety Training Series "SMK3 Audit", September 2002.
* ISO Training Series "Understanding ISO-9001: 2000", November 2001
* Management Training Series "Advance Supervisory", October 2001.
* National Seminar "Operation & Chemical Process Technology Development", March 2001.
* National Seminar "Save Energy Building", March 1997.
* Graduated from LB-LIA English Courses, Jakarta (Basic Level Certificated), 2004.

REFERENCES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9301 to 9350 of 10926)

Go to Search Parameters...

Brief Description

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

Proven security team manager, with international experience, specializing in the protection of high profile targets in medium and high threat environments.

CAD/CAM engineering

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith.

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

I have 4 years of work experience. Currently working as a Laboratory Supervisor / Chemist in Maersk, Qatar with Wallem Ship Management. Prior to that, I have worked as a Lab Technician in Inter-Tek Caleb Brett (India). I have completed my apprenticeship as a Lab Asst from BPCL, a Fortune 200 co

Electrician - Certified

Captain looking for a challanging position shore based as Marine/HSE Superintendent- Manager. I am an unlimited Master Mariner and I have recently achieved a MSc in Marine Operations and Safety Management.

Welder or Welder Supervisor

PT. JAEIL INDONESIA (09 Oktober 1999~ 22 February 2001) As Position Warehouse (Material Control): - Responsibility for controlling in receiving and issued material the day to day. - Material Order overseas or local suppliers and P/O balance. - Handling withvarious suppliers as well as and capability

Entry level electrical engineer resume

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

Warehouse Management

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

Process engineer / production supervisor in oil/gas/petrochemical company.

I was graduated on jun 2004 in Electronic Communication Engineering (DIPLOMA), I was fully loaded with computer skills as I was a computer maintenance in Putrajaya(Malaysia), Previously I work with Mimos Semiconductors as a Production Technician. I can work as a teamwork.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Radio and Communications

30 years in worldwide Operations, Sales, Engineering (Cementing Specialist) & Management with leading international service companies - principally Dowell Schlumberger & BJ Services.

Mechanic Maintenance Engineer Oilfield maintenance experience, Trilingual Arabic-French- English Total geographical mobility

looking for a job in oil an industrial field as an assistant mechanic or helper or any other position.

Experience in a number of various onshore & offshore, Oil & Gas projects. Expanded knowledge of most aspects of Piping Design from 3D & 2D design concept studies to General Arrangement and Isometric drawings. Involved in in-house designs, shop fabrication & fieldwork.

Position held : Production Technician

To work for better with a team work

HAVE BEEN EXPOSED TO : Instrumentation application & equipment in following plants 1. Coal Based Sponge Iron Rotary Kilns capacity 6 X 1,00,000 TPA. 2. Rotary Hearth Furnace : Project 3. Rail & Universal Beam Mill : Project

Instrument Engineer, experience for DCS engineered projects in design & testing of configuration DCS oil production offshore, installation, start-up Commissioning ,Shut-down/Start-up (yearly maintenance) for Oil refinery facilities& Fertilizer production, Familiar with PLC A-B and PLC Siemens.

37 year old man seek an employment or contract off-shore as a roustabout, mechanic, motorman, fitter or welder

MECHANICAL TECH: Experience in assembling and overhauling / repairing of all rotary equipment of oil/gas industry.

Have sound understanding in Geology. Graduate in Geology. Doing Post Graduation(final year) in Geology. Done field work. Computer-friendly.

Fully experienced drilling sub sea engineer

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

I believe my 4 years studying in Universiti Teknologi PETRONAS will be of great value should I join your company. Throughout the learning process, I was exposed to the task and responsibility in the field of technical and theoretical especially in mechanical field.

Progressively Responsible of a range of Purchasing/Warehousing Management, Organization & Administration positions with worldwide procurement (national & international); Contribution and Direct Involvement in all previous jobs with regards to purchasing of spare parts and materials required for all

Project Maneger, Civil Engineer

24 years in oilfiled \ Safety Rep.\ EMT

Strategic thinker and forward, proficient at working with financial controls, experienced in QHSE, Operations audit, breath of Oilfield services and technical knowledge.

Power engineer with post graduate diploma in thermal power plant engineering. Handling emergencies and restoring the plant stability in short time. Trouble shooting the problems in a short span.

Logistics, Procurement and Materials Manager (Supply chain)

M-Tech (Aerospace) and B.Tech (Aerospace) , Specilization: Computational Fluid Dynamics

Experienced Design Engineer

A solid background in project controls, project coordination, project scheduling, and records management with over twelve years combined experience in these areas.

I am a licensed Heavy duty mechanic trained and certified in Canada. I have extensive oil field/drilling experience. I am trained in Caterpillar natural gas compression products. I have extensive supervisory experience as well.

I am working as a Mechanical/HSE Engineer in ADCOP (Abu Dhabi Crude Oil Pipe line Project) in Abu Dhabi, UAE. I have also got the training in Oil and Gas processing Plant for three months and also worked as a maintenance and sales engineer in SATAKE Corporation, JAPAN Pvt. Ltd.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Background includes the military, law enforcement, and international security management experience. Education includes a B.S. in Justice Studies, Master Safety Administrator (MSA) certification, and Emergency Medical Technician (EMT) certification.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 [ 187 ] 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out