Resume - Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/...

Misco Jobs

Resume #47683

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
Date (from – to): 01.08.2004. - onwards
Name of company: "Saipem Mediterranean Services" L.L.c., Rijeka, Croatia
Type of business or sector: Design, construction and installation of offshore/onshore oil & gas projects – I'm working on ACG project in Baku, Azerbaijan, T&I of Platforms as Field offshore/onshore Engineer
Occupation or position held: Field Offshore/Onshore Engineer
Main activities and responsibilities:
Engineering support and commissioning of DUQ Jacket in SPS Yard (Bos Shelf) as Field Engineer. Main activities are to follow and support DUQ Jacket fabrication and preparation for Load-out on transportation barge STB-1 and installation offshore by supervising subcontractors and ongoing activities as per various procedures, manuals, drawings etc.
Field Engineer in SPS fabrication yard responsible for preparation and modification of Derrick Barge Azerbaijan (DBA) and STB-1 transportation barge, supervising and coordinating subcontractors in all activities.
Project Engineer preparing installation manuals, procedures and drawings for CA-CWP Topside and Bridge and WA-PDQ Topside installation.
Field Engineer involved in Offshore installation of CA-CWP Topside, Bridge and preparations for HUC-UP Activities, offshore installation of WA-PDQ Topside. Offshore Installation of Spools and Protection frames for Wet Storage.
Company representative on survey activities in Qatar, Ras Laffan, Dolphin Project for 2 months.

Date (from – to): June 2002. – July 2004.
Name of company: Shipbuilding industry "3.Maj", Rijeka, Croatia
Type of business or sector: Design and construction of marine vessels.
I was Foreman and Controller for insulation in Anti-Corrosive Protection Department
Occupation or position held: Foreman and Controller for Insulation
Main activities and responsibilities:
I was Foreman and Supervisor for 2 Insulating subcontractors, following procedures and insulation plans on board during construction/building of 5 new chemical tankers for thermal, sound and fire insulation. Responsible for ongoing insulation activities, required material, related documentation, inspections on site with shipowner and insurance representatives, interface between site and technical office.
Short description of equipment on drilling or workover rig / ship / others

EDUCATION AND TRAINING
Date (from – to) 01.09.1993. – 25.06.1997.
Name of organizations Secondary school – Technical school for engineering and shipbuilding, Rijeka, Croatia
Type of educations or training Mechanical Technician
Certificate Number 602 – 03/97 – 03 – 14
Validation of Certificate Unlimited

Date (from – to) 01.09.1997. – 26.05.2003.
Name of organizations University - Maritime University, Rijeka, Croatia
Type of educations or training Ship Mechanical Engineer
Certificate Number 602 – 04/03 – 01 – 14
Validation of Certificate Unlimited

Date (from – to) October 2005
Name of organizations OPITO – OTI – Occupational Training International
Type of educations or training Basic Offshore Safety Induction & Emergency Training
Certificate Number BSTO03507
Validation of Certificate 4 years

Date (from – to) August 2004
Name of organizations Maritime University, Rijeka, Croatia
Type of educations or training Basic Offshore Safety & Survival Training
Certificate Number 050033631
Validation of Certificate Unlimited

LANGUAGE SKILLS
Mother Tongue Croatian

OTHER LANGUAGES English Russian
Reading skills Very good Poor
Writing skills Very good Poor
Verbal skills Very good Basic

PC skills: Windows - Internet, Word, Excel, Access, MS Project, PowerPoint, AutoCAD

SOCIAL SKILLS AND COMPETENCES
I'm responsible and reliable person with great motivation and experience in team work. I like to learn and experience new technologies especially in engineering/construction branch. I'm communicative and sociolazing person who has experiance in work and cooperation with various nationalities.
I like to read, go to gym and pool and many other activities in my free time.

ORGANIZATIONAL SKILLS AND COMPETENCES
I was Foreman and Controller for Insulation in Shipyard, responsible for approx. 20 people, leading them and supervising in production of 5 new chemical tankers.
Now, I'm Field Engineer, also involved in team work, self motivated team leader on offshore installations activities, organizing various jobs, inventing new designs and methods for construction/installation activities.

DRIVING LICENSES
1. Croatian driving license, B categorie

REFERENCES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6801 to 6850 of 10917)

Go to Search Parameters...

Brief Description

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

Piping design engineer having 4 experience in ,PDS,CADWORX 2008 AUTOCAD 2008.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 [ 137 ] 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out