Resume - MBA/Chemical Engineer with 10 years experience in Oil & Gas plant operation. Exp...

Misco Jobs

Resume #47730

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

2005 MBA Marketing (7.38 GPA), West Bengal University of Technology.
2002 B.E. Chemical (AMIIChE), Indian Institute of Chemical Engineers.
1995 BSc Hons Chemistry, Calcutta University, India

KEY COMPETENCIES

* 10 years of experience in Oil & Gas Project and Production.
* Handled international projects in Oil & Gas sector of USD 350 million and above in similar capacity.
* Knowledge of Engineering design and ability co-ordinate with Engineering Consultants.
* Conversant with all aspects of project management, budgets, planning and scheduling with the help of integrated Project Management System.
* Strong relationship management with Clients & Customer.
* Development of the scope of work for the project, including the project schedule.
* Technical coordination of the various engineering disciplines.
* Identification of project trends and changes.
* Project Reporting.

* Experience in construction site regarding operations, manpower and equipment resources management.
* Cryogenic LPG/LNG storage project expert, & operation, commissioning expert.
* Dynamic in nature and efficient in multi field like project management/Plant operation/commissioning/Engineering/procurement/quality control/safety/marketing/techno commercial.
* Supervision of Pre commissioning and commissioning activities of pumps, compressors, Heaters, Columns, strippers, blending package etc.
* Experience of Project/operating Compressors, Pumps, Heaters, strippers, Boilers, Reboilers, Ejectors, Crude distillation column, Vacuum distillation column, Naphtha stabilizer, absorbers etc.
* Expert experience on DCS panel operation in control room.

* High level of commitment and awareness of International Safety & Quality Standards
* On-shift supervision of operating team to meet production targets.
* Development of training manuals and operating procedures.
* Plant operation/commission/ shut down expertise.
* Providing engineering support during fabrication, installation hook-up, commissioning and start up.
* Facilitate and develop a proactive and cohesive team.
* Multilingual: English, Hindi, Bengali

WORK HISTORY

2006 ¡V PRESENT
DELTA STEEL COMPANY PLC, NIGERIA
SENIOR ENGINEER (PROJECT)

Responsibilities include:
* Manage & coordinate multidiscipline engineering activities to ensure projects are executed in a safe, efficient, cost effective and timely manner.
* Ensure the project conforms to the client's approved basis of design and all applicable regulatory and code requirements.
* Responsible for all inter-discipline co-ordination and technical management of third parties.
* Expert experience on DCS panel operation in control room.
* On-shift supervision of operating team to meet production targets.
* Development of training manuals and operating procedures.
* Plant operation/commission/ shut down expertise
* Develop strategies and plans to meet company objectives
* Establishing and managing a team of engineers.
* Train new operators and learn all units/job classifications included in my progression.
* Operate a DCS control panel.
* Assist the Shift Team Leader to assess incidents.
* Contribute to ensuring the operability and maintainability (e.g. control and monitoring systems, alarm management, safe isolation, draining and cleaning) of equipment by participating in HAZOP and model reviews.
* Member of multidisciplinary review group charged with evaluation of all producing assets and non producing assets and making recommendations for development or divestment.
* Assist in the administration of compliance with safety, quality, budget and schedule.

[Refer to Appendix for a detailed history of technical experience.]

2005 ¡V 2006
ESSAROIL LIMITED, INDIA
PROJECT ENGINEER

Responsibilities included:

* Supervision of Pre commissioning and commissioning activities of pumps, compressors, Heaters, Columns, strippers, blending package etc.
* Experience of project and operating Compressors, Pumps, Heaters, strippers, Boilers, Reboilers, Ejectors, Crude distillation column, Vacuum distillation column, Naphtha stabilizer, absorbers etc.
* Expert experience on DCS panel operation in control room.

* Carryout production monitoring.
* Preparation of process flow diagrams and P & ID's.
* Preparation of process datasheets for equipments, instruments etc.
* Development of piping layouts, GA drawings, Isometrics, line lists, material requisitions, method statement for construction, design specification.
* Supervision of tray installation and inspection activities in crude column, Vacuum column, stripers, stabilizer, absorbers etc.
* Review of P & ID with control philosophy.
* Supervision of hydro test of pipe lines.
* Preparation of line flushing plan.
* Preparation of operation manual.
* Active participation in design reviews, risk assessment, HAZOP's, vendor bid evaluations and project readiness reviews.
* Supervision of inspection activities in vessels, LP steam boilers, HP steam boilers, Heaters, ID fan, FD fan, ducts, Economizer etc
* Assist in the administration of compliance with safety, quality, budget and schedule.
* Reports directly to the Project Manager and responsible for assuring the technical detail of the project.
* Contribute to ensuring the operability and maintainability (e.g. control and monitoring systems, alarm management, safe isolation, draining and cleaning) of equipment by participating in HAZOP and model reviews.
* High level commitment to Safety.
* Development of training manuals and operating procedures.
* Co-ordinate Project Safety Reviews.
* Development of an execution strategy for this work.
* Development of a work delivery team comprising of in-house and external personnel.
* Assist in the administration of compliance with safety, quality, budget and schedule.
* Reports directly to the Project Manager and responsible for assuring the technical detail of the project.
* Managing the development of projects from receipt of initial scoping definition through to handover to operation and final project closeout.
* Planning of tasks in detail cost estimating and budgeting.
* Reviewing of contractor deliverables including P & ID's, equipment arrangement, equipment specifications, data sheets, vendor proposals & technical studies.
* Active participation in design reviews, risk assessment, HAZOP's, vendor bid evaluations and project readiness reviews.

2000 ¡V 2005
INDIANOIL PETRONAS LTD, INDIA
PRODUCTION/PROJECT ENGINEER

Responsibilities included:
* Monitor and assess gas plant operations against high standards of OH&S.
* Experience of operating Large Cryogenic LPG storage system and pressurized Vessels.
* Experience of Cryogenic LPG ship unloading, loading, storing and blending.
* Supervision of Pre commissioning and commissioning activities of pumps, compressors, Heaters, Columns, strippers, blending package etc.
* Experience of operating Compressors, Pumps, Heaters, strippers, Boilers, Reboilers, Ejectors, Crude distillation column, Vacuum distillation column, Naphtha stabilizer, absorbers etc.
* Expert experience on DCS panel operation in control room.
* Plant operation/commission/ shut down.
* On-shift supervision of operating team to meet production targets.
* Participate in Team Safety Meetings and follow up on assigned items.
* Assist Maintenance personnel in troubleshooting and repairing of equipment.
* Managing the development of projects from receipt of initial scoping definition through to handover to operation and final project closeout.
* Planning of tasks in detail cost estimating and budgeting.
* Reviewing of contractor deliverables including P & ID's, equipment arrangement, equipment specifications, data sheets, vendor proposals & technical studies.
* Active participation in design reviews, risk assessment, HAZOP's, vendor bid evaluations and project readiness reviews.
* Focus and strive for continuous improvement in the planning & execution of projects by analyzing metrics and recommending adjustments to execution or strategy to improve overall project performance.
* Excellent communication and documentation skills. Interface with client to resolve issues to clarify and resolve questionable directives which may jeopardize the success of a project(s).
* Development of training manuals and operating procedures.
* On-shift supervision of operating team to meet production targets.
* High level commitment to Safety.
* Development of a work delivery team comprising of in-house and external personnel.

1999 ¡V 2000
HINDALCO INDUSTRIES LTD, INDIA
DEVELOPMENT CHEMIST
Responsibilities included:
* Monitor and assess plant operations against high standards of OH&S.
* Product development & Quality control aspects.

1995 ¡V 1998
SALTS & CHEMICALS PVT LTD, INDIA
PRODUCTION SUPERVISOR
Responsibilities included:
* Train new operators and learn all units/job classifications included in my progression.
* Assist the Shift Team Leader to assess incident
* Plant operation/commission/ shut down.
* Assist Maintenance personnel in troubleshooting and repairing of equipment.

APPENDICES

TECHNICAL EXPERIENCE

„X knowledge of international codes and standards in the Oil & Gas processing industry, Capability to manage Project activities for large, complex projects, with ability to develop project management systems and Ability to co-ordinate input from different technical disciplines.
„X Ensure safe operation of existing production facilities, optimal processing of hydrocarbons, and identification and maturing of surface facilities development opportunities.
„X Development and implementation of Summary of Change Order.
„X Cost monitoring and project progress verification.

„X Liaison with Operations Manager to insure facility design is efficient and operational.

„X Interface with project personnel to develop project forecasts and analyse project costs.

„X Preparation of budgets in conjunction with Operations Organization members.

„X Identify and develop surface facilities opportunities for existing and new assets through concept selection and development stages, in order to maximize recovery (volume and value) of hydrocarbons through existing facilities.
„X Manage the upgrade of the site wide Fire & Gas System including interfaces with the new DCS/ESD system.
„X Developing scopes of work for FEED, assisting in the tender and award of a FEED contract and supervising engineering during FEED.
„X Developing scopes of work for detailed engineering and assisting in the tender and award of a major engineering contract and supervising detailed engineering.
* Coordinating and managing the interface between multiple engineering companies, equipment manufacturers and suppliers.
* Ensuring that the project is designed within the required codes standards, laws, regulations and procedures.
* Providing high quality engineering for alternative development scenarios and defining an optimum development solution.
* Establishing a system to ensure quality control during engineering.
„X Ensuring that the facilities are designed to operate within all corporate and regulatory health, safety and environmental standards.

MEMBERSHIPS

„X Member IIChE (India)

TRAINING

TECHNICAL

2005 Short term Course on Petroleum Refining, HIT
1998 Health, Safety & Environment, JU
1997 Water Pollution & Air Pollution Control, JU
1996 Chemical Analysis & Testing, RTC

SOFTWARE TRAINING
1999 MS word, Excel, Outlook, PowerPoint
1998 Computer Application, C, C++
1997 Computer Aided Mechanical Draftsman ship(Auto-CAD)

PERSONAL BIO

Date & Place of Birth 12 December 1972 ¡V Sagar, India
Citizenship Indian
Marital status Married, 1 child (4 years)
Passport No. A6371964
Current CTC USD 2500/month
Expected CTC Negotiable
Minimum time required to join One Month

REFEREES

Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6851 to 6900 of 10917)

Go to Search Parameters...

Brief Description

Power Engineer 3rd class

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

M.Tech & Exe. MBA in Oil & Gas domain with 3+yrs exp

Over 18 years' experience in design and construction of water & wastewater treatment projects - industrial & municipal

GIS-Geophysicist/Databse Administrator

A pragmatic and well balanced project manager/engineer with a ‘can-do’ attitude.

During 13 years I was working at rig site on many different wells. I know very well Rig equipment, Drilling tehnology, Mud properties, Fishing, Coring. In many situation I solved stuck, kick and lost circulation problems.

I am a Geophysicist with seven years experience in Petroleum Exploration. Extensive experience working with multidisciplinary teams on exploration, interpretation and prospect generation.Experienced geophysics workstation user.Excellent computer skills and good knowledge of technical software.

I am experienced cased hole engineer

Presently i am incharge of Utlities area consists of Steam Boilers & Turbines. Specialist in all type of watyer treatments plants.

Mechanical engineer looking for job in mechanical field

Diploma in Mechanical Engineeering, Diploma in Materials Management and Diploma in Exports & Imports. Working in a Multinational Company M/s. Chemtex Consulting of India Pvt. Ltd, India Since Apil’ 2004 as Procurement Engineer

Certified Chemical engineer with Masters Degree

over 10 years in the oil and gas industry with experience from FEED to Hook -up and Commissioning in the role of Lead Document Controller

P&ID design draftsman. Very good experience in PDS2D, AutoCAD, AutoPLANT, Smartsketch, Microstation, I/RAS B, AutoLisp, AutoCAD VBA, Scripts etc.

I am M.Tech. in Applied Geophysics from IIT Roorkee. I am working for an OIL COMPANY as a Logging Engineer.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

I’m doing my job with the highest possible efficiency.

Over 7 years of experiences in Project Planning, Project Control, Project Coordination for Oil and Gas Projects, Refinery and Gas Turbine Power Plant ,B.E in Civil Eng.,Certificate course in Primavera Ver . P3, Pe/c Ver.3.5 and Pe/c Ver 5.0,MS Project and MS office applications,AutoCAD 2000

PIPING DESIGNER

Vibration Analyst Level-II certified by BINDT for Condition Monitoring of all Rotating Equipments

Courthouse trained on Section/Township/Range and Metes and Bounds in Kentucky and Indiana. Worked three years in ten counties in Texas completing many types of research in courthouses and abstract plants. In East Texas I have spent about 10 months on various curative projects. Worked as trainer .

8.5 years of experience in Plant layout and Piping Engineering/CAD Administration on Petrochemicals, Refineries and Mining & Metallurgy projects

MSc. Geology with a PGDiploma in GIS and completed a PGDiploma in Petroleum Exploration. 6 months exp.as Trainee Mud Logger.

Power plant operator, experience in operate the compressors, turbine

A Chemical Engineer with 10 years of experience in Procurement in Oil/Gas and Minerals Industry

I have Bachelors Degree in Mechanical Engineering with 18 years Experience India, Middle East and African countries in Oil, Gas sector both onshore and offshore fields.

turbine repair, upgrade, assembly, balance,blading,and machine work

I am a specialist working in the Distillation section, my duty to control and monitor the vacuum column and the atmospheric column.

36 year old gentleman looking for a job as a rigger. I have been in this industry for years, please feel free to contact me if ther is anything more you would like to no about me. Thank you

Experienced Work Over & completions wellsite Supervisor, safety orientated, Well Site Testing, Perforating, CBM Fracing, WIreline, Slickline, Logging, Fishing, Swabbing, Snubbing, Cementing, Coil Tubing, Heli-Portable Supervision, Project Coordinating

Senior EPC/EPCM Manager with +30 years experience of successful multi-disciplined project & program management; successfully organizing, managing and directing large mining, heavy civil and infrastructure projects

drilling Bs, exploraion and production Ms, production optimisation and developement management

MBA/Chemical Engineer with 10 years experience in Oil & Gas plant operation. Expert eperience in commissioning /operation in refinery/petrochemical/Cryogenic LPG terminal/hand on experiance in DCS/quality control/Marketing

MSc Geology Petroleum Geophysicist/Geologist

Over Forty years experience in the oil and gas industry specializing in drilling, work over, and lease construction supervision. Experience in both international and domestic operations in remote and harsh conditions.

Experienced cost controller

Experienced oil/gas/mining/heavy civil project manager. Currently PMT Construction Manager on $8.5 billion dollar project.

I have a strong foundation in Computer Aided Drafting, Pipe Drafting and Design, Mechanical Design-3D Modeling, Solidworks and Inventor.

B.S. Mechanical Engineer. Member of Mechanical Engineer’s Chamber / TURKEY; Qualifications : Bachelor of Science in Mechanical Engineering (University of Anadolu / TURKEY 1980-1984) , Certified Welding Inspector ( CSWIP 3.1, Cert No: 37291, E

Chemical Engineer with 7+ years of experience and possessing commendable skills in operation & control of complex high pressure petrochemical reactions in high capacity LLDPE plant

Senior Condition Monitoring Technician having over Seven years of working experience in data base creation, data acquisition and vibration data analysis of rotating equipment used in Oil and Gas industries

A Singaporean Trained Instrumentation Control Engineer

Process Engineer with exp of FEED & EPC Proj for Refinery, Oil&Gas Plant

Having worked in three countries in industries such as: Printing, Tourism, Piping Fabrication, Oil and Gas construction and erection projects

Specialty in building PZ-7,8,9,11,12,13 pumps total creation of rig and breakdown of rig. Controlled mud weight and every circulation loss chemicals

“Mechanical Maintenance engineer” / “Electrical engineer”

Job Title : Service, Erection and Maintenance Engineer - Maintenance & Trouble shooting skills - Installation, Repair, commissioning and STart Up of Boilers. Stron Communication Skills. Training Courses

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 [ 138 ] 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out