Resume - Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3...

Misco Jobs

Resume #48344

CONTACT INFORMATION:
View contact information...

Academic / Technical Qualifications
BSc in Material Science and Metallurgy [Incomplete]
BTEC National Diploma in Fabrication and Welding [Crosskeys College, South Wales, UK – 1984]
Basic Programming Certificate [Crosskeys College - 1984]
City & Guilds 822 Welding Oxy-Acetylene and Metal Arc [Jefri Bolkiah College – June 1976]
City & Guilds 820 Basic Engineering – Mechanical [Jefri Bolkiah College – Dec 1975]
Lower Certificate of Education [Anthony Abell College - 1973]

Professional Qualifications
CSWIP 3.2 Senior Welding Inspector
BGas-CSWIP Grade 2 Painting Inspector
CSWIP 3.4 Radiographic Interpretation Level 2 [Group A and B Materials]
CSWIP 3.1 Welding Inspector
ISO9001-2000 Approved Lead Assessor
NACE Painting & Coating Inspector Level 2
Singapore Institute of Standards and Industrial Research [SISIR] ASNT Liquid Penetrant Testing Level II
SISIR ASNT Magnetic Particle Testing Level II
SISIR ASNT Ultrasonic Testing Level II
SISIR ASNT Radiographic Film Interpretation Level II
AWS Welding Inspection Specialist Certificate
NRPB Certified Radiation Protection Supervisors
Royal Society for the Prevention Of Accident [ROSPA] Safety Inspector

Safety Courses
Tropical FOSET – OPITO APPROVED Course – Megamas Sdn Bhd
BOSIET – Warm Water [TROPICAL] – OPITO APPROVED Course – Megamas Sdn Bhd
Managing Hazard At The Workplace – Megamas Sdn Bhd
Permit To Work For Signatories – Megamas Sdn Bhd
Permit To Work For Auditors – Megamas Sdn Bhd

Other Courses Attended
Contract Management & Managing HSE in Contracts Workshop – June 2003
Senior Welding Inspector CSWIP 3.2 Course (WIS10) - June 2003
Mobile Crane Inspection and Safety Consideration Course - June 2002
Over-Head Crane Inspection and Rigging Consideration course - June 2002
Wire rope care, maintenance & inspection and slinging/rigging course - June 2002
T.D. Williamson, Inc. Tulsa, Oklahoma, USA Pipeline Product Seminar - Sept 1989
S.G.S. Industrial Inspection Division the Basic Quality Assurance Course Sept 1984
The Welding Institute Practical Radiography Course - March 1980
The Welding Institute Comprehensive Practical Ultrasonic weld examination - April 1979
ASME SECT. VIII DIV. 1 Boiler and Pressure Vessel Code –Design & Fabrication of Pressure Vessel [with alteration and repair] - [Jakarta – Indonesia] – October 1997

Others info
Registered Senior Welding Inspector to The Welding Institute UK.

CAREER SUMMARY
Has more than 28 years experience in Welding/Fabrication and Lifting Equipment Inspection in the oil and gas industry. Career progression from Assistant Engineering Inspector to Senior Welding Inspector / Coating Inspector for Brunei Shell Petroleum, as Plant inspector for Shell Refining Australia and Cressier Refinery in Switzerland, as head of QA/QCS Engineer for Brunei Shell Petroleum and currently holding a position as Branch Manager for Ptas-Its Sdn. Bhd. in Brunei Darussalam.
I have demonstrates my technical, professional and attitudinal capabilities necessary to be a leading team member for onshore and offshore work. Good practical experience in materials, welding [repair and modification], inspection, corrosion, failure analysis evaluations, fracture mechanics in design and quality control. Conduct Base Line Inspection on new pipeworks and Risk Based Inspection on existing pipeworks. Familiar with Shell DEP's Standard and other International Standard such as ASME, ANSI, API, BS and ISO. Good knowledge and understanding of Quality Management System [QMS] with emphasis in Quality Auditing on contractor Quality Management System and internal auditing for self assurance of department compliance of the Company QMS. Last but not least has field supervision experience of complex and difficult repairs of critical steel under severe time restraint.

Principal achievement to date
Nominated as the Operation Services Environmental Management Representatives in pursuing ISO14001 certification. – 2005. Operation Services was successfully accredited the ISO14001 certification under my leadership.
Successfully developed and Launch Competent Standard for Plant Inspectors – 2002
Assist Cressier Refinery, Switzerland during their Year 2000 major shutdown on behalf of Brunei Shell Petroleum Company. Rated as outstanding plant inspector by the Chief Inspector of Cressier Refinery. (See Attachment 1 – Cut and paste from email).

Contribute to the success of Well Blow Out (RS-19) containment supporting Red Adair Company – 1989

EXPERIENCES

1st Nov. 2005 – Present
Ptas-Its Sdn Bhd, Kuala Belait, Brunei.
Location: Brunei Darussalam
Position: Contract Manager for Brunei Branch

Responsibilities:
Responsible for all of the Brunei Branch QC Inspection operations and personnel, both onshore and offshore. Personnel include Senior Inspectors, Multi Discipline Inspectors, Radiographers etc. (in excess of 30 personnel).
Scope of work includes but is not limited to:
Radiography (X & Gamma Ray), Magnetic Particle Inspection, Dye Penetrant Inspection, Visual Inspection and Ultrasonic Inspection
Also liaising and coordinating clients' work.
Clients include but are not limited to;
Shell Brunei Petroleum Company
SKSWood Sdn Bhd
Foster Wheeler Sdn Bhd
Brunei LNG
Total E & P Borneo
At times seconded to any of the above clients due to operation requirement and scope of work includes but not limited to:
* Supervision of inspection personnel
* Compilation and Verification of QC Data Package prepared for the work conducted.
* Review of Plant, Equipment & Consumable Certification Records to establish compliance to Project Requirements.
* Ensuring that work activities are being conducted conforms to applicable Codes, Standards & Client Requirements
* Welding Inspection & Radiographic Interpretation of various welded joint
* Painting Inspection carried out to Client requirements
* Witnessing of Hydrotest and Leak Test
* Magnetic Particle Inspection and Dye Penetrant Testing on Various Weldments.

July 2000 – 24th October 2005
Brunei Shell Petroleum Company
Location: Brunei Darussalam.
Role: QA/QCS Engineer
Department: Engineering Support

Responsibilities but not limited to:
Main Responsibilities and accountabilities but not limited to:
Acting and manage QA/QCS (SEN/13) Section in the day-to-day running of the section.
Support project departments in quality related matters.
Review and update Quality procedures as and when required e.g. BSP12P9 and BSP12P10
Overseeing and auditing inspection work done by contractors QC inspectors.
The verification / inspection audits cover all Welding, Painting, Radiography MPI, UT, and Radiographic Interpretation activities.
The scope of the QA/QC Audits covers contractors in Brunei and in Asian Region.

Plant Inspector
April – June 2000
Cressier Refinery – Now known as PetroPlus
Location: Cressier, Switzerland
Role: Plant Inspector
Department: Inspection and Quality Control.

Seconded to Cressier Refinery, Switzerland during their Year 2000 major shutdown. Responsible in the inspection of all pipe-works, structural, column, heat exchangers, vessels, coolers, Fluidized Catalyst Cracker Unit [FCCU], Reactor, furnaces, boilers, flares stack, and all other associated refinery equipment.
Please refer to my work performance during the shutdown (attachment 1) below from the Chief Engineer of Cressier Refinery.

April 1999 - March 2000
Brunei Shell Petroleum Company
Location: Brunei Darussalam.
Role: Section Head of Onshore Inspection and Lifting Equipment Inspection and Certification.
Department: Inspection and Quality Control Assurance.
Responsibilities but not limited to:
Manage and conduct QCS inspection on Company's new project.
Manage all onshore piping, vessel, structure, wellhead and other onshore facilities inspection requirement.
Manage and supervise all contractor inspection personnel utilization to their maximum.
Plan and budget for all future work including resources requirement.
Assist and promote Local Citizen Development in-house and Government Students on attachment to the Department.
Provide assistance in conducting interview for new QC personnel recruitment.
Attend and participate in monthly Health, Safety and Environment meeting.
Lifting Equipment Inspection and Certification
Provide support to project teams in verification of:
a. Vessel / Barge Lifting Appliances prior to hiring.
b. Lifting tackles certification and documentation c. Lifting equipment intended to be supply to BSP by Vendor.

Manage contractor surveyor's utilization daily and verified time allocation.
Plan and conduct Lifting equipment audit yearly.
Assist Human Learning Department [HLD] in reviewing tender document for Rigging and Slinging, Mobile Crane course.

Jan. 1991 – Mar. 1999
Brunei Shell Petroleum Company.
Location: Brunei Darussalam.
Role: Section Head of Offshore Inspection
Department: Inspection and Quality Control Assurance.
Responsibilities but not limited to:
Manage and plan all offshore inspection activities as per the Company Business Plan. This includes new fabrication / construction work and existing pipe-work and structural. In the existing pipe-work, baseline survey was conducted under On-stream Inspection (OSI) project.
Manage and utilized all in-house and third party inspection resources to their maximum.
Carry out weekly verification on all work done by contractor and BSP own inspection personnel.
Compile report of findings and made recommendation weekly to BSP Service Manager Leaders Team [SMLT].
Developed Work Strategy and Planning which include budget allocation, resources requirement for all future work with view of improvement in terms of effectiveness and cost saving.
Assist and promote Local Citizen Development in-house and the Government Students on attachment to the Department.
Participate in technical evaluation of Inspection Contract tender evaluation submitted by bidders.
Review all offshore inspection work packages submitted by the Computerised Inspection Reporting Retrieval and Analysis System [C.I.R.R.A.S.] group prior to execution.
Prepare and compiled weekly progress reports on all inspection work done.
Maintain flexibility in work execution in the event of clashes with other work in same platform/location.
Promote Abseiling Inspection Technique in order to save cost against scaffolding.

Jan. 1990 – Dec. 1990
Shell Refining Australia [Geelong Refinery]
Location: Australia.
Role: Plant Inspector for West Area.
Department: Inspection and Quality Control Assurance.
Responsibilities but not limited to:
Responsible in the inspection of all pipe-works, structural, column, exchangers, vessels, coolers, fluidized Catalyst Cracker Unit [FCCU], Reactor and all other associated plant equipment during major shutdown. Assigned as Quality Control Surveillance Engineer towards the end of the assignment. Role includes providing QA/QC input to project group, which includes review of Inspection Test plan, witness welders qualification test, review of welding procedures etc. Project includes the fabrication of new heat exchangers, pressure vessels, air receivers and storage tanks refurbishment.

Sept. 1986 – Dec 1989
Brunei Shell Petroleum Company
Location: Brunei Darussalam.
Role: Construction Supervisor Onshore (Mechanical)
Department: Onshore Construction Projects
Responsibilities but not limited to:
Plan, execute and monitor all construction work carried out by the approved contractors are in-line with BSP procedures, meeting HSE requirement, completed as per approved plan and within the approved budget.
Projects experiences includes but not limited to:
Wellhead Piping Upgrade, Flowline laying, Wellhead tie-in and hookup, Wellhead abandonment project, new-site preparation for drilling rig to move-in including provision for utilities line such as industrial and potable water, construction of Tank Groups (TG 30 & 31).
Actively involved in supervising and construction of facilities required by Red Adair Company during major Well Blow-out Incident

Sept. 1985 – Aug 1986
University College Cardiff, South Wales, United Kingdom.
Location: United Kingdom.
Attended Bachelor of Science in Materials Science and Metallurgy Course.

Oct. 1984 – Aug 1985
Brunei Shell Petroleum Company
Location: Brunei Darussalam
Role: Engineering Inspector
Department: Inspection and Quality Control Assurance.
Responsibilities but not limited to:
Carry out Non Destructive Testing on onshore and offshore piping, flow-lines, risers, weldments, vessels, storage tanks and drilling equipment such as drill pipes, drill collars, monel drill collars, whole opener, stabilizers. Inspection technique used Ultrasonic, Magnetic Particle, Dye Penetrant and Radiography.

Sept 1982 – Sept 1984
Crosskeys College of Further Education, South Wales, United Kingdom.
Location: South Wales, United Kingdom
Attended Business Technical Education Council [BTEC] National Diploma in Welding and Fabrication.

Mar 1977 – Aug. 1982
Brunei Shell Petroleum Company
Location: Brunei Darussalam
Role: Assistant Engineering Inspector.
Department: Inspection and Quality Control Assurance.

Responsibilities but not limited to:
Assist Senior Inspector in carrying out Non Destructive Testing on onshore and offshore piping, flow-lines, risers, weldments, vessels and storage tanks. Inspection technique used Ultrasonic, Magnetic Particle, Dye Penetrant and Radiography.

Jan 1974 – Sept. 1976
Jefri Bolkiah School of Engineering, Kuala Belait
Location: Brunei Darussalam.
Attended Basic Engineering Trade Subject and Welding Fabrication Course

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 10816)

Go to Search Parameters...

Brief Description

A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with

“Petroleum and Gases” University Ploiesti, Romania

To obtain the position of Instrumentation Technician/Production Operator.

Over 6 years of experience in analysis and design of steel and concrete structures

Engineering Graduate( B.Tech. Chemical Engg. – 4 years degree course) with 16 ½ Years Experience in Work Over Operations / Supervisor / Completion

Presently working as Safety Engineer (Contract Hire through agency) for Abu Dhabi National Oil Company, ADNOC- Abu Dhabi, and U.A.E from March 2006.

15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Registered Professional Engineer in Ontario, Canada, Mechanical Engineer BSc. & M.Eng.

See resume below for details of career path from a qualified engineer with 5 years offshore engineering to a position of Contracts Manager within Subsea 7 looking after the UK business and providing support to West African projects , managing a team of more than 17 contract specialists

Project Management and General Management Professional

Thirty-two years of successful senior-level public and private sector programme management experience, with a core focus in Community and Social Development, Institutional Strengthening & Capacity Building, Strategy, Local Economic Development, and Small & Medium-Enterprise (SME) Development.

Project /construction director/manager FPFO, Jacket and decks, Modules, loading terminals (shallow and deep water)

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

I having overall 11years experiance in production/manufacturing field and currenty looking for better future where i can exploure more my knowledge and experiance.

Highly Skilled and conscientious B Welder/Vessell Fitter for the last 17 years. Dedicated and organized, able to prioritize and meet company deadlines.

Sr. piping design

Dedicated, enthusiastic and diligent individual with excellent organisational skills. I perform at a consistently high standard in a very demanding and pressurised environment. My maturity and professional manner exudes a sense of confidence and calm in a very demanding environment.

Professional Civil Engineer with over 11 years of experience in the oil and gas industry focused in the analysis and design of different types of structures, such as frameworks, pipe racks, bridge trusses, operation platforms, vertical tanks supports and their foundation, and retaining walls.

I have over 30 years offshore experience and of those have worked in a senior position 25+ years, have worked in a senior position on some large scale sub sea completions worldwide, I have very good equipment knowledge and are looking for a shore base position with logistics or projects.

Over 35 years Drilling, Africa, ME, Russia, USA

A geologist with experience in the oil industry involving exploration and development projects in Guatemala South Peten basin, geological information database management, mud logging in oil drilling activities, oil tanks gauging(1996-2004). Logging geologist in USA (Nov 2005-Mar 2009)

I have 8 years of designing experience with a good knowledge of P& ID, fabrication, welding, material selection and manufacturing process worked on the designing software like Auto CAD and Pro/E both in 2D and 3D for almost 5years from concept stage till the mass production of the component.

Seeking mechanical supervisor/mechanic position

Experienced and motivated Ph.D mechanical Engineer

Oilfield Experience 34 years. 33 years with Well Services. I began my career as Well services Technician and my last jobs with Well Services as a Team Leader responsible for Slick Line operation in both Gas and Oil wells.

SUMMARY I have been involved in the Drilling and Work over Industry for the past 26 years. With experience on Tender and Drill Ship & land rigs, both Mechanical and Electrical, ranging from 6,000 to 20,000 feet, as well as Sea crest and

Civil engineer/pipeline precommissioning

multi-disciplined autocad designer

Performing work as per international standards following operational excellence management system

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

Extensive experience in power, petrochemical and utilities plant startup, operation and training

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

To secure a full-time position with an industry leading company world-wide in IT – Manager / Project Manager / Project Coordinator / Senior Planner

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

12 Years of Experience in Oil & Gas, Industrial & Construction Safety (HSE Training)

I am senior Information management engineer with 12 years experience in the Petroleum and IT industries. I have a Bachelor of Mathematic / Information technology

I have been working as an executive engineer(inspection) in chittagong urea fertilizer ltd. since 2nd april,1997 to till date.I have to supervise all on-stream and shutdown inspection activities of different vessels,tanks,pipe lines etc to ensure plant integrity &reliability .

Senior HSE advisor

Electrical Engineer, Planner

cartography_gis_mapping_drafting

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out