Resume - Automation engineering experience in oil and gas sector. Programming experience...

Misco Jobs

Resume #4863

CONTACT INFORMATION:
View contact information...

Carrier Objective
A position in the Computer control or Automation Engineering.

Professional History

Sep, 2000 - June, 2001 Nortel Networks Ottawa
Software Designer / ATM Core Design Support
Investigated and tested different software defects on Passport shelves. Provided fixes to the software defects and submit them to the streams after testing. Modified Northern Telecom Publication (customer documentation) and answered technical questions from ATM group or other groups. Participated in reviews (CDL, code) for ATM Link TX Utilization feature. Actively involved in changes made to ATM Core code through participation in Code Control responsibilities.

1996 - 2000 Arabian Gulf Oil Company
Project Engineer
Designed and documented projects to add new oil wells to Messla field SCADA system. Upgraded, integrated, tested, and documented a control PLC program to synchronize between the Generator and the main power supply. Prepared a technical specification for a proposed Load shading project for Messla Gas Turbines. Troubleshooting a major fault in Sarir Gas plant; results in a reduction of shutdown costs and awarded a recognition certificate.

1989 - 1994 Arabian Gulf Oil Company
Automation Engineer
Designed and tested a control program for a PLC to monitor and protect the main oil line pumps. This work reduced the required days of a proposed shutdown from 15 days to one hour.
Designed an automatic resetting program to reset the flow computer type 1120 at midnight, results in automatic print out of Daly pumped reports. Calibration of field instruments (pressure, Temperature, Vibration transducers) and Troubleshooting of electronic cards.
Working under call to troubleshoot shutdown problems with a team of engineers. Software and hardware troubleshooting of different types of PLC's (Telemechanique, Siemens Simatic-S5 series). Commissioning of the SCADA RTU's and Salma PLC at Messla oil field. Promoted to the Head of the Automation Department in 1992 Supervising three engineers and two technicians in the department, performing daily activities, writing monthly reports, ordering spare parts, and follow up the preventive maintenance programs.
Additional Professional Activities

1996 - 1999 Factories & Private sector
Consultant to industry
Repairing and troubleshooting faults in different factories where Microprocessor based controller and PLC's are used in control process.
Delivering courses in Programmable Logic Controllers (Simatic S5 & Mitsubishi) to Engineers and Technicians in different factories (Beverage company, Cables company, Pipes company, Video company and others). Managed to troubleshoot faults in the following factories: -
Cables factory: - (Drop-Wire and Telephone-Wire isolating Machines).
Beverage factory: - (Palletize Machine).
Video factory: - (Wave Soldering machine)

Education & Training

1994 - 1996 Heriot-Watt University Edinburgh, UK
M.Sc in Digital Systems Engineering
Project: Design of a real-time Computer control Application using The real time Kernel 'Ctask'.

1982 - 1985 Higher Institute of Electronics Beniwalid, Libya
B.Sc. in Computer Engineering
Graduated with the overall average 90.4 (The First student on the HIOE)

Dec, 1992 TURNEL PLC Manchester, UK
Training course in Siemens Simatic S5 PLC.
Acquired Skills
Project management skills and strong knowledge of automation software and hardware.
Strong problem solving and analytical skills.
Ability to work within a team environment and work under time constraints.
Good programming Skills developed throughout my work experience.
Programming languages: - C/C++, some Labwindows, and Microsoft Visual Basic.
Working knowledge in Word, Excel, Electronic workbench, and Windows98.
Digital designs and knowledge of Microcontroller design techniques.
Design of real time systems and programming.
Teaching Skills and valuable Experience in both hardware and software issues of computer systems and several types of programmable logic controllers.

References
Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5451 to 5500 of 10816)

Go to Search Parameters...

Brief Description

I have extensively worked with world renowned engineering firm

Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit

I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.

Good relationship with the work friends, easiness of creating friendships, taste of reading, to fish and to do pictures for besides practicing soccer.

I have worked as a Driller and Tour push for the last 27 years.

Coded pipe & pressure vessel welder with valid certification

Construction superintendent/construction manager

Automation, control engineering in industrial plants

Area Maintenance Static Supervisor

SCM Logistics and Materials Managment

Marine Electrical with electronics & Automation Exp. (off - shore, Oil Rig, FPSO, Drill Ship, OSV) 21 years exp.

Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation

Journeyman Pipefitter, Journeyman Gasfitter (Class GB-00018470), Journeyman Plumber - Red Seal (IP #M-16-00616) Since starting my apprenticeship in 1988, I have gained experience in many aspects of the mechanical trade, such as construction, shut-downs, and maintenance...

Am a fresh directional driller with background in well planning and borehole survey, i have ten years experience in various drilling position.

Automation engineering experience in oil and gas sector. Programming experience Hardware and software knowledge

Chemical Engineer with 11 years Experience in Process Engineering, Production in chemical industry

Job Objective To pursue a career with a major international industry. The position should offer career opportunities, expansion of knowledge and an immediate challenge

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

Engineering, cadd designer, autocad, microstation

Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.

13 years Completion/Workover experience. Completion, sand control, fracturing, matrix acidizing design. Extensive project management experience including three assignments in operator's offices. Operations and engineering management experience.

Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipment by the use of SKF Microlog 60 with SKF Prism4 1.35 & SKF Machine Analyst 2.2 vibration analysis and data management software. Familiarity with the data base creation, modification and report preparation using SKF MA

i m the student of BS GEOLOGY 7TH semester nd looking for job.

More than 8 years HSE experience.

1yr Apprenticeship in BHEL,Trichy

A focused team oriented Petroleum Technologist who brings with a varied work experience in production line and Electrical and Electronics troubleshooting able to work in ambiguous and demanding situations with positive results.

marine engineering steam ship,maintenance fitter,malaysia maritime academy

Good communication skills; Microsoft and Programming skills; B.Eng in Mechanical Engineering.

Electrical and electronics engineering

Working knowledge of PLC's

A Safety Professional with a enthusiastic approach to Safety & Environmental issues, excellent communication skills, able to plan & prioritise busy management schedules while ensuring high visibility and involvement

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

I am a B.Tech. (Applied Petroleum Engineering) from University of Petroleum and Energy Studies, Dehradun (India). Though I am not experienced but i have certain skills like I work well as part of a team andI find it easy to get on with people.

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Proven record of growth and success building businesses from start-up to profitable operations in highly competitive environments. Very skilled at identifying market opportunities and creating strategies to effectively exploit them. Proven success record setting strategic direction, executing to pl

Free! HSE Manager - Value Assurance Manager - Asset Integrity Manager

POSITIVE ATTITUDED, HARD WORKING

I have a post graduate degree in Petroleum and Gas Engineering; while preparing my thesis based on secondary oil recovery (Niger Delta),I work in collaboration with SPDC Nigeria. They provided me with data.I have skills also in drilling Engineering in areas of casing design and mud Engineering.

Electrical Engineer with experience in Engineering,Procurement and Construction

Experience in Mound storage pressure vessel construction, fabrication. ERP software application experience, Project execution, commissioning and operations.

I have a TWIC and Safety card, currently looking for offshore and overseas posistions.

To obtain a full time career that will enable me to utilize my skills and abilities. To also have the opportunity and availability for advancement with the company.

I am process engineer for vertical batch annealing line have 7 years experience, Training Courses(communication skills - business writing - problem solving and decision making - fundamentals and statistics analysis)

I’m currently on an M.Sc progamme in Petroleum Engineering at Heriot-Watt University, Dubai campus, I hold a B.Sc. Degree in Geology from the University of Legon, Ghana.

Indonesian Citizen healthy, 32 year’s of age, Certified Welding Specialist for last of ten (10) years, GTAW-SMAW: SS, CS, Duplex SS.

Qualified electrician - Electrical Technician - Diploma - Busy with btech degree

Mechanical engineer and a well engineer

Offshore Drilling Materials and Logistics Supervisor. with experience of 4 + years.... looking for better opertunity

In oilpatch for 7 years

10 years drilling experience

First Prev 101 102 103 104 105 106 107 108 109 [ 110 ] 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out