Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #48917 next resume »»
CONTACT INFORMATION:
View contact information...

To,

Respected Sir,
SUb: CV for the position of "senior operator-utilities & powerplant "
Ref: Misco jobs.

I am working in "TIHAMAPOWER", Saudi Arabia in "Power Plant" as an Operation engineer. I have been working in the organization since may 1st 2005.I have experience of 7 years in the fertlisers plant in india in utilities dept.
Right now I am looking out for a higher avenue to work with the Utilities and Power Plant related organizations. I have acquired Eight years of hands on experience in the Commissioniing and operation of GE 7FA (4 no) & all the sections of Utilities and Power Plant from both board as well as field. Exposure to a good number of emergencies, coupled with sound theoretical background has convinced me to take up new challenges in my area of work.

In this context, I would like to offer my candidature for "shift engineer-utilities" position in your esteemed organization and requesting you to consider my candidature for the same. I am enclosing my detailed curriculum vitae for your kind perusal.

Thanking you.

CURRICULUM VITAE

CAREER OBJECTIVE: To associate with an organization, which progresses dynamically and gives me a chance to update my skills and to be part of a team that excels in work towards the growth of the organization.

KEY EXPERIENCE: commssioning experience of the first GE 7FA+e(mark vi) in Saudi Arabia, and HRSG. About Eight years of experience in the operation of "Utilities and Power Plant" in India and Saudi Arabia.

ACADEMIC PROFILE:
D.M.E: S.B.T.E.T, Andhra Pradesh in 1998.

Pursuing Study:
B.Tech: J.N.T University, doing third Year.

Areas of exposure:
* GE 7FA gas turbine commissioning & operation experience
* Boilers
* Power Plant
* Waste Heat Recovery Boilers
* Pre Treatment Plant
* De Mineralization Plant
* Effluent Treatment Plant
* Inert Gas Generation Plant
* Cooling Towers
* Ammonia Storage
* Natural Gas Control Station

Computer Skill Sets:
Operating systems: Windows 95/98/2000, XP, MS-DOS.

EMPLOYMENT RECORD
Employer:
1) TIHAMAPOWERPLANT – Saudi Arabia,

2) Nagarjuna Fertilizers And Chemicals Limited, Kakinada-Andhra Pradesh.
Department: Operations
Position: Operation Engineer

Experience: 1 year 2 months IN SAUDI ARABIA [Since MAY' 01, 2005]
6 YRS 10 months in NAGARJUNA FERTILISERS in Powerplant section

CHEMICALS AT WORK:
* Hydrogen: to cool the generator.Tto safely purge the generator and to safely vent the hydrogen in case of maintenance
* Nitrogen: generation of liquid and gaseous nitrogen and storage and safe distribution of nitrogen.
* Ammonia: Condensing back the ammonia vapour from atmospheric storage tanks stored at –330C through refrigeration loop and loading / unloading the same to road trucks / rail wagons.
* Chlorine: Handling chlorine containers and running chlorination loop in Water Treatment Plant.
* Sulphuric Acid: Handling Sulphuric Acid in Cooling Towers.
* Hydrochloric Acid: Handling HCl in De mineralization Plant for cation bed regenerations.
* Caustic Lye: Handling Sodium Hydroxide in De mineralization Plant for anion bed regenerations.

RESPONSIBILITIES:
* Participating in the commissioning activities of the GASTURBINE
* Safe startup of the HRSG
* Report progress of the commissioning activities
* Operation of the 230kv switch yard
* Monitoring and controlling the 500 tons/hr steam nework
* Safe start-up and shutdown of all sections of Utilities and Power Plant from both board and field.
* Operating efficiently and logging & monitoring all the process parameters of all sections.
* Troubleshooting and Debottlenecking of all operational problems.
* Conservating energy to the possible extent and optimizing the utilization of chemicals.
* Practicing safety norms in the work place to have a good record of safety freeman hours.
* Practicing and implementing the Quality Standards as per ISO 9002 as certified by BVQI.
* Practicing and implementing Environmental Quality Standards as per ISO 14000 and OHSAS.
* Occasional hydro testing of Gas/Steam/Liquid handling pipelines and also H.P and M.P boilers.
* Occasional purging and cardboard blasting of various types of pipe lines.
* Alkali boil out and acid clearing operations in boilers.
* Steam blowing of High/Medium/Low pressure steam lines.
* Refractory dry out operation in boiler furnaces.
* Online testing of high-pressure safety valves.
* Over speed trip checks of turbines
* Operation of the 230 kv switch yard
* Tag out and lock out of the breakers.
* Preparation of standard operating procedures
* Preparation of standard operating instructions
* To safely fill the hydrogen into generator casing and in emergencies to purge safely.
* To handle the emergencies perfectly and to guide the team mebers in case of crisis.
* To communicate with the Saudi Aramco,and to coordinate in handling the emergencies in case of Crisis to avoid their palnt trip.
* To suggest the Team leader to run the plant effectively and also to maintain the plant clean and neat
* To support the maintenance staff in their jobs and to raise work order to maintain the machines trouble frees
* To report any deviations in plant perameters to the immediate superior for necessary actions and to follow up the jobs.

ACHIEVEMENTS:
* Nominated as Rescue Squad Member for the organization.
* Nominated as Total Productive Maintenance [TPM] Team Member for the department.
* Previously served as 5S Team Leader for the organization
* Awarded increments for rich performance in critical situations.[process upsets and power failures etc.]
* Handled shifts as incharge shift engineer when the duty shift team leader is not available.
* Received traing from Saudi Aramco in Basic Life Support. (first aid)
* Undergone training from GE USA, HHI (Korea) in the operation of Gas turbines, HRSG
& utilities

ORGANIZATION'S PROFILE:
Present organization:

TIHAMAPOWER Generation company is located in SAUDI ARABIA.The plant bags the honour of the first GE7FA Gasturbine in Saudi Arabia. INTERNATIONAL POWER - a large power generation group has made a joint venture with the SAUDI OZOR under the name TIHAMA POWER to produce the power and steam to supply to the SAUDI ARAMCO the largest gas plant in world.The TIHAMAPOWER is having 4 plants in Saudi Arabia out of which already 1 plant is under commercial operation and another plant is stepping into commercial operation within few days. Another two plants are going towards the completion of the construction activites.
Previous plant

Nagarjuna Fertilizers And Chemicals Limited, is located at Kakinada which is the head quarters of East Godavari District in Andhra Pradesh. This plant is one of the most eco-friendly and first gas based fertilizer plant with captive power plant in south India. Some of the best honours and awards bagged by this organization are " ISO 9002 certification from BVQI Netherlands, ISO 14000 certification, National Safety Award from British Safety Council, Good House Keeping Award from National Safety Council, Excellence In Environmental Control Strategies And Safety In Chemical Plants from ICMA Bombay, Golden Peacock National Quality Award from Institute Of Directors New Delhi, Rajiv Gandhi Parti Bhoomi Mitra Award from WLD Board Government of India, Best Company Award from Industrial Economist, Best Performance In Large And Medium Scale Industry from All India Manufacturers Organization etc.,". It was in1985 that the group came on to the scene and the implementation of the prestigious project was entrusted to it. It's registered office is located at Nagarjuna Hills, Hyderabad, Andhra Pradesh – India.

MACHINERY AT WORK:
Since the job calls for the highly reliable and uninterrupted production of power with good quantity standards, sophisticated equipments like GE 7 FA gas turbines, EX2100,LCI,"Back pressure and Condensing type steam turbines, Centrifugal/ Reciprocating and Screw type compressors, Single and Multi stage centrifugal pumps, boiler feed water pumps, METSO USA designed DCMS, Gas turbines and Steam generating units, Diesel generators etc.," and heavy structures like "Clarifiers, Thickners, Dryers, Resin Beds, Adsorbers, Cold Box etc.," were being used on the work with modern control systems. Laboratory department for checking the quality standards during execution of work is being maintained.

Experience deatils

EQUIPMENT DETAILS:

1) Gas Turbines:

a) GE 7FA X 4 NO.S
Make: GE, USA, CAPACITY -155MW, MARK VI control system
b) Capacity: 1 x 26 MW ; Make: Thomassen International, Netherlands.

Type: Frame V; Control System: Speedtronic Mark V; Single Shaft.

c) Capacity: 2 x 10.5 MW; Make: Nuivopignone, Italy.

Type: Frame III; Control System: Speedtronic Mark IV; Double Shaft.

2) Waste Heat Recovery Boilers:

* 2x 360 T/HR, 45 bar, NEM BOILERS.
Capacity: 1 x 100 T/Hr; 108 Ksc; 515°C; Make: Dutche Babcock Balkedurr Ltd.,Germany.
Type: Single Drum; NG fired water tube boiler.
Capacity: 2 x 60 T/Hr; 40 Ksc; 380°C; Make: Macchi, Italy.
Type: Bi Drum; NG fired water tube boiler.

* Boilers:
Capacity: 2 x 100 T/Hr; 108 Ksc ; 515°C ; Make: Mitsui Engineering Ltd., Japan.
Type: Bi Drum; Multi fuel [NG / LSHS] water tube boiler.

* Generators:
* CAPACITY: 4x 190 MVA: 18kv,GE MAKE, HYDROGEN COOLED GENERATOR.
Capacity: 1 x 33625 KVA; 11 KV; Make: Asea Brown Boveri, Sweden.
Capacity: 2 x 8600 KVA; 11 KV; Make: Asea Brown Boveri, Italy.

* Diesel Generators:
Capacity: 2 x 1375 KVA; 415 V; Make: Fincantieri, Italy.

* Steam Turbines:
Power: 2 x 1.09 MW; Type: Condensing Type; Make: Triveni, Tiruchirapalli.
Power: 2 x 727.6 KW ; Type: Back Pressure ; Make: Dresser Rand, France.
Power: 1 x 110 KW ; Type: Back Pressure ; Make: Shin Nippon Machinery Ltd.,
Power: 2 x 370 KW ; Type: Back Pressure ; Make: Kure Works.

* H.P Boiler Feed Water Pumps:
Capacity: 3 x 140 M3/Hr ; 139.4 Ksc ; 126° C ; Stages: 8 ; Make: Worthington, Italy.
Capacity: 1 x 121 M3 /Hr ; 140.2 Ksc ; 126° C ; Stages: 15 ; Make: Sulzer, Germany.

* M.P Boiler Feed Water Pumps:
Capacity: 4 x 41 M3 /Hr ; 55 Ksc ; Stages: 13 ; Make: Shinko Industries Ltd., Japan.

* Forced Draft Fan:
Capacity: 2 x 36.35 NM3 /Sec ; Make: Ebara, Japan.

* Cooling Water Pumps:
Capacity: 3 x 9000 NM3 /Hr ; 1.2 MW ; 3.3 KV ; Make: Mather & Platt, India.
Capacity: 3 x 5000 NM3 /Hr ; 0.7 MW ; 3.3 KV ; Make: Beacon Weir, India.

* Water Pre-Treatment:
Capacity: 1200 M3 /Hr; Make: Geo Miller, Calcutta.

* De-Mineralization:
Capacity: 4 x 75 M3 /Hr [Make Up]; Make: Thermax, Pune.
Capacity: 3 x 120 M3 /Hr [Process Condensate]; Make: Thermax, Pune.
Capacity: 3 x 240 M3 /Hr [Turbine Condensate]; Make: Thermax, Pune.

* Cooling Towers:
Circulation Rate: 10 x 3600 M3 /Hr ; Type: Open Recirculation,Induced Draft, Cross Flow.
Make: Paharpur, Calcutta ; Chemical Treatment: Non-Chromate from Aquazur, Pune.

* Nitrogen Plant:
Capacity: 600 NM3 /Hr in GAN mode ; Process: Air Seperation by Distillation.
Make: Air Products, United Kingdom.

* Instrument Air:
Capacity: 2 x 2200 NM3 /Hr ; Type: Centrifugal ; Make: Elliot, United States Of America.

* Ammonia Storage:
Capacity: 2 x 5000 MT; Type: Atmospheric,Vertical,Double Wall, Double Integrity, Domed.
Refrigeration Loop: 90 TR with two Screw Compressors of 45 TR capacity each.

* Ammonia Transfer Pumps:
Capacity: 3 x 35 M3 /Hr ; 28 Ksc ; Type: 11Stage, Vertically Barrel Mounted, Centrifugal

View contact information...
«« previous resume next resume »»
Search Results (Resumes 5351 to 5400 of 10926)Go to Search Parameters...
Brief Description
Oil and Gas Equipment supply
Mechanical Draughtsman with Diploma in echanical Engg. 5 yrs. Exp.
Experienced workover rig driller looking for international or domestic work as the western Canadain oilfield has slowed down. I am hard working, a quick learner and very adapable to new surroundings. As you can see from my resume, I am a dedicated and loyal employee as well.
Skills include Lease Negotiations, farm ins and farm outs, JOAs, Oklahoma Corporation Commision forms and requirements, Pooling Orders, Division of Interests, Due Diligence, Title Curative, Ownership Reports.
Qualifications & Skills: Title Runsheets, Lease Take Off's, Ownership Rpts., Lease Acquistions and Due Diligence
structural drafter or designer, preferably on the offshore indestry.
I am looking for a career within a company that promotes from within and encourages continuous learning as well as where my enthusiasm, drive and knowledge will be a valuable asset.
Skills- Creative and Innovative, Good Communicative Skills. Ability to Work under Pressure. Ability To Mobilize And Supervise People. Strong in Team spirit. Microsoft Office software and the Internet, , Qualificatiions- Higher National Diploma (HND) in Insurance (Lower credit), 2007.
Instrument design wihin oil and gas industry. Using Intools and CAD packages.
I have been working for 6 years on inland drilling rigs. I worked my way up to driller last year & have 4 years exp. as a derrickman.
Senior Cased Hole Wireline Engineer
Welding Inspector/Trainer/Supervisor
Deepwater Completion engineer
Master Electrician
Over 25 years experience in the pipeline construction industry. Positions held range from heavy equipment operator, superintendent, foreman, & utility inspector. Qualifications listed with ISNetworld, OSHA Safety certifications
11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.
+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).
Comprehensive drilling experience of 11+ years in various locations worlwide with E&P Operators. Four years experience as Drilling Supervisor offshore Thailand and Gulf of Mexico. Seven years Drilling Engineering experience onshore and offshore, includes day to day rig operations management.
Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization
20 years Materials Controller / Coordinator
Sr. mechanical/construction engineer
Over fourteen years of experience in Detail / Design, Supervision and Drafting of plant layouts, piping systems for onshore oil and gas facilities, refineries, pipelines, power & sugar plants and industry utilities.
Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.
Dynamic 12 years of professional experience, with 8 years pioneering in the field of Oil and Gas business. HSSE training of company personnel, HSSE master plan implementation, auditing and recommending system updates according to company needs and international legal requirements
I am willing to work as hard as I have to in order to make a specific position work for me.
Petroleum Engineer with 11 years working in Subsurface Services with solid knowledge and field experience in Water Control Technologies, Squeeze Cement with Coiled Tubing, Coiled Tubing, Snubbing , Wire Line, Logging, Well Abandons and Stimulation Jobs. Bilingual Level English - Spanish.
Chemistry, Physics and Calculus Educator/trainer. Native Spanish speaker.
Oil & Gas operation technician (Gauger) in OM&S (Oil Moments and Storage).
SUMMARY Professional Manager with real life experience in business management and successful sales specific to Russian and East European business marketplaces. Experience in working with remote corporate resources. Highly-motivated, energetic team player available for extensive travel.
Challenging position in the Engineering field, in an organization, where I can Contribute my strong analytical and troubleshooting skills and experience in Machinist, Designing and CNC Programming along with the outstanding Interpersonal skills and grow professionally.
I have 12 years of experience in oil and gas field operations. I've handled various responsibilities from exploration stage of field to upgradation of production to 65000 BOPD. Attached below is resume.
Over the past 14 years in the oil industry i have worked from ground up on drilling rigs. roustabout , floorhand ,motorman , derrickhand , driller , and my past employment for the past 4 years has been operations superintendent with duties pertaining to drilling ,workover and production.
Industrial Engineer, specialization in Environmental Engineering. 12 years experience in the Environmental area and oil and gas sector, as an advisor and as HSE Manager. Large experience formulating CEMPS, EIA, Audit programs, etc., and managing HSE budgets.
CHEMICAL ENGINEER with twelve years experience in production/process/project engineering. Looking for Project Management/Senior Project Engineering position either in the USA or Overseas [Preferably Africa].
Fundamental and technical security analysis, fixed income, financial statement analysis, accounting, budgeting, portfolio construction and asset allocation, econometric analysis, financial and statistical data modeling and forecasting, risk management, project management.
Above 12 years experience in the process Industry. Conversant with software packages like windows, Hextran, PI, Lims, Simulator and BAAN. Worked in various capacities in the operation of Petrochemical operation. Loading, Sulfiding and technical support to refinery unit operations
SUMMARY: Strong foundation in oil and gas, mining and environmental geology, in industry and national laboratory setting.
Basin modelling, organic petrography, sequence stratigraphy, x-ray diffraction, 2D seismic
Looking to contribute to the success of a company with my experience, hardwork and dedication to work as a team and make a difference preferably working on Petroleum, Gas or Cargo ships or Oil Rigs
I can work in supply boats, service ship and bunker ship
Around 12 years in the field of Instrumentation and Control System in Olefins Gas Cracker, Petrochemical and Copper Smelter & Refinery Sectors.
"Seeking Professional and Challenging career in Oil/ Gas/ Refinery/ Petrochemical sector. Offer extensive Field experiences in Maintenance/ Shutdown/ Commissioning/ and Construction of Plant and Rotary / Static Equipment”
8 yrs.exp in the commissioning and operation of gasturbines, boilers & all other utilities in a big power plant and fertlisers company
Automotive and Locomotive Mechanic - Knowledgable and Reliable
HR Generalist with 14 years of experience
14 years of experience in managing all phases of Operations, including purchasing, inventory control, transportation, budget preparation and execution, staff development and regulatory compliance. Experience held in manufacturing, Oil/Gas, transportation and chemical industries.
-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /
Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill
Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.
HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field
First   Prev   101   102   103   104   105   106   107   [ 108 ]   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com