Resume - Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specif...

Misco Jobs

Resume #4990

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To efficiently use petroleum and reservoir engineering knowledge in a position as a Production or Reservoir Engineer in any area were needed.

EDUCATION

BACHELOR DEGREE University of Zulia.
Maracaibo, Venezuela.
Studied Program: Petroleum Engineering
Degree Obtained: Petroleum Engineer, 6/1998. G.P.A 16.38 out of 20.

HIGH SCHOOL San Vicente de Paúl High School.
Maracaibo, Venezuela.
Degree Obtained: Bachelor of Science, 07/1991.

ELEMENTARY SCHOOL Hightower Elementary School.
Atlanta, USA.
Degree Obtained: Elementary School Graduate, 07/1988.

THESIS 08/1997 – 04/1998: PDVSA, Lagoven, Tamare, Venezuela.
"Exploitation Plan for BAINF-13 Reservoir".

SUMMER JOBS 08/1996 – 09/1996: PDVSA, Bachaquero Lago Exploitation Unit, Tamare, Venezuela.
"Gas Lift Wells Optimization".

ENGLISH LEVEL
2002: Conversational Level, PDVSA, CIED. Bilingual

PROFESSIONAL EXPERIENCE
2003-2004 MICROTEC, Maracaibo, Venezuela
Application Engineer. Responsible for the marketing, sales and installation of magnetic joints to prevent paraffin and/or calcium carbonate obstruction in oil wells.
2002-2003
PDVSA, Bachaquero Lago Exploitation Unit, Lagunillas, Venezuela.
Multidisciplinary team worker for the Asset Management Plan project of the Bachaquero Lago Oil field. Responsible for the elaboration of the asset management plan of Bachaquero Lago oil field in the Reservoir Department. Specifically the definition of the asset in terms of reserves, production, optimization, EOR, new technologies, risk analysis, uncertainty analysis and best view plan for the next twenty years of the asset.
2000 – 2003 PDVSA, Bachaquero Lago Exploitation Unit, Lagunillas, Venezuela.
ESP Project Coordinator. Responsible for the implantation of an ESP project in Bachaquero 02 middle/heavy oil crude reservoir. This responsibility included the search, reservoir and productivity study, infrastructure capability and the installation process of ESP pumps in order to efficiently increase the well production. Responsible for the successful installation of more than 50 ESP pumps including existing and new wells with approximately 30 thousand barrels related to this project.
1998-2003 PDVSA, Bachaquero Lago Exploitation Unit, Lagunillas, Venezuela.
Exploitation/Reservoir Engineer. Assigned to monitor of approximately 80 wells related with 14.000 thousand BPD of heavy/middle oil crude. Included the search and reservoir studies for workover and new wells candidates, well potential-production monitor, Cyclic steam injection candidates.
1998-2002 PDVSA, Bachaquero Lago Exploitation Unit, Lagunillas, Venezuela.
Cyclic Steam Injection Project Coordinator. Responsible for the search, reservoir and production study of existing and new candidates for "huff and puff" stimulation for horizontal, inclined, SAGD and vertical wells. Including the calendar schedule elaboration, monitor and additional production prediction. Additional potential-production monitor and benefits as well as economic evaluation process. So as thermal studies of the post-injection behavior.
1997-1998 PDVSA, Bachaquero Lago Exploitation Unit, Lagunillas, Venezuela.
Directional Reservoir Engineer. Search, design, reservoir study and drill plan elaboration of horizontal (SAGD) and deviated thermal wells in order to efficiently recover the remaining reserves of the Bachaquero-02 reservoir with more than 100 hundred existing horizontal wells in the reservoir.

SCHOLARSHIPS

PDVSA, Lagoven. 06/1995 - 08/1997

SKILLS
Basic computer literacy. Computer Software: Microsoft Windows, Microsoft Office (Word, Excel, Power Point)
Simulator: Sub-pump, Perform, Well-flow, Pipesim, OFM, Sapphire, Crystal ball

CAPABILITIES
Resourceful, inquisitive, persevering and adaptable.
Ability to work with multi-discipline teams.
Friendly working with people.
Willing and able to relocate.

TRAINING COURSES
* Basic Structural Geology.............................................................40 HRS
* Clastics and Elctrofacie Sedimentology...................................... 40 HRS
* Cased hole logging interpretation (software application).. ..........40 HRS
* Formation Damage and Stimulation............................................40 HRS
* Wellbore Completion...................................................................40 HRS
* Underground Geology Map.........................................................40 HRS
* Applied 2D/3D Seismic Interpretation..........................................40 HRS
* PVT Analysis and Validation.......................................................40 HRS
* Petrofisic Properties based on Core analysis..............................40 HRS
* Pressure test Analysis (SAPHIR Software)..................................40 HRS
* Open hole log interpretation.........................................................40 HRS
* Reservoir Evaluation and Monitoring...........................................40 HRS
* Conventional Recovery Methods (Water/Gas Injection).. ...........40 HRS
* Economic Analysis for Projects....................................................40 HRS
* Nodal Analysis.............................................................................40 HRS
* Advanced ESP Operations..........................................................40 HRS
* Advanced Oil Field Manager........................................................40 HRS
* Dynamic Reservoir Characterization………………………………40 HRS

OTHER ACTIVITIES
Hobbies: Sports, Music, Reading

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6801 to 6850 of 10923)

Go to Search Parameters...

Brief Description

I have a stable work history having spent four years working as a Mechanical Engineer within the Teyseer Group in Qatar. I have a broad range of experience including project management, site and field works, tender preparation, etc. On Sep 2004, I graduated as a Petroleum Engg (Masters Degree).

Over 15 years experience as a instrumentation & control engineer in oil/gas , petrochemical industries. For the past seven years , I have been also involved in SCADA system in detailed basic engineering, integrating, commissioning and maintenance.

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 [ 137 ] 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out