Resume - Proficient in physical and wet chemistry analyses using gravimetric, titrimetric...

Misco Jobs

Resume #5006

CONTACT INFORMATION:
View contact information...

Objective

Seeking a position that offers opportunity for advancement in fields related to Science & Technology
Education

University of Kerala
Kerala State, India
Bachelor of Technology in Chemical Engineering

University of Tennessee
Knoxville, Tennessee, USA
Master of Science in Chemical Engineering

Experience

University of Tennessee
Knoxville, Tennessee, USA
August 2001 –September 2002
Graduate Research Assistant

Masters Thesis Titled
" The feasibility and economics of sludge treatment by nitro-hydrolysis with product recovery and recycle".
Developed various Process Designs for sludge treatment with nitro-hydrolysis using HYSYS simulation software.
Evaluated the capital requirements using theoretical methods and quotes from equipment vendors.
Evaluated the economic feasibility using sensitivity analysis using various process parameters for the Process Designs.
Worked as a consultant to design a sludge treatment plant for Knoxville Utilities board (KUB).
As project team leader periodically presented the project developments to both peers and KUB officials.
Negotiated with various vendors to get price quotes for the various process equipment.
Lead and coordinated the project group consisting of various graduate and under-graduate students..
Maintained the Departmental Laboratories and Computer laboratories.
Operated and trouble shooted the entire HP Gas chromatographs of the Department.
Help develop and maintain the departmental website.
Operated various heavy machinery such as forklifts, tractors etc.

Oakridge National Laboratory
Oakridge, Tennessee, USA
February 2001 -August 2001
Graduate Research Assistant

Designed and ran experiments to calculate the solubility effects of biomass on aquifer/vadose zones on critical contaminants such as TCE.
Help in Research and documentation of several other on-going projects.
Ran various detection and analytical experiments using HP GC's and HPLC's.
Develop new method procedures for new analyses on the GC & HPLC's
Ran fermentation in a 300L New Brunswick Scientific fermentator to cultivate biomass for the above and other projects
Was Site trained to identify, generate and dispose hazardous wastes.
Site trained to work in and maintain a high security US government chemical laboratory.
Helped in the general running of the laboratories.
Maintained the chemical (Hazardous/non hazardous) log for various laboratories in the facility.
Updated and maintained the laboratory manuals and log books.
Maintained the inventory of the laboratory.
Was given security clearance by the US government to work in the facility

Regional Research Laboratory (CSIR)
Trivandrum, Kerala State, India
February 1999 -September 1999
Final Year Project
The Regional Research Laboratory is part of the Council of Scientific & Industrial Research, India. The world's largest Industrial Research agency
Fabricated a 13 meter Fast fluidized Bed
Ran experiments to measure the Minimum Fluidization Velocity on the fast-fluidized bed for organics such as Rice, Peanuts, Black Pepper & Mustard and provide data to formulate mathematical equations to predict the minimum Fluidization velocity
Help study the characteristics of organics in a fast-fluidized bed
Ran experiments on the Fast Fluidized Column with illeminite, to re-engineer the process for extraction of Titanium from illeminite for Travancore Titanium Products.
As a quality control chemist used GC and HPLC's to identify various organics present in aryruvedic medicines, help develop various methods in detecting such organics
Presented the project at the Indian institute of chemical engineers annual conference (1999) held at Trivandrum.
Won the best project at the Indian Institute of chemical engineers annual conference (1999)

Travancore Titanium Products
Trivandrum, Kerala State, India
July 1997- August 1997
Industrial Training

Studied the extraction process of Titanium from 1Iieminite using Contact process to help RRL, Trivandrum, redesign the extraction
General Management Training

Skills

Experienced in working with HP Gas Chromatographs (5890 & 6890), HPLC,New Brunswick Scientific Fermentors (300L)
Programming ability in C, C++,VB,Dot Net, Pascal, Matlab, C Shell.
Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques.
Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Core courses taken in Masters Program

Advanced Chemical Engineering Thermodynamics
Industrial Pollution Prevention
Applied Microbiology and Bioengineering
Diffusive and Stagewise Mass Transfer Operations
Application of Linear Algebra in Engineering Systems
Engineering Internship in Process Control (Eastman Kodak Controls Lecture)

Honors/Activities

Won the Best project award instituted by the Indian Institute of Chemical Engineers, Trivandrum Chapter, India
Member of the College Soccer team (1995-99)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6801 to 6850 of 10917)

Go to Search Parameters...

Brief Description

I am candidate who has excellent research and development skills along with good manufacturing experience.

Dec 2002 Shift/ - Board Supervisor. Jan 2002 – Sept 2002. Shift Team Leader / Panel Trainer. June 2001 – Dec 2001 Start-up - / Shift Team Leader. Nov 1991 – June 2001 Panel Board Operator and Lead Operator.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

A Health, Safety & Environment (HSE) Professional with more than 12 years of extensive working experience in Oil & Gas Onshore & Offshore Project, LNG Construction, Commissioning & Start Up.

Senior Instrumentation and Controls Technician

Shaped Charge Engineer

Instrument supervisor / technician v exp construction commissioning start up HSE

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Navigational skills, Stability, Mangement

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

I am an instrumantation and control system designer working with FLOUR INDIA , I am a Diploma holder in Electronics engineering , my working exprience is 03 year

Application for QA/QC Inspector job (Ready to work Offshore)

A Well Services company manager with almost 30 years of industry experience; my background includes working in the oilfield service sector with numerous postings in Canada, Russia, China, and New Zealand. Working with teams of talented people to achieve exceptional results is foremost on my list of

Effective knowledge and working with Microsoft windows based software like MS Office (word, Excel, PowerPoint) as well as in AutoCAD.

Management consulting professional with global consulting experience. Proven track record in executing strategy and operations consulting assignments. MBA, CFA Level II Candidate

I have experience on land drilling rigs and would like to obtain an offshore position.

I have completed a 2 year diploma program in electrical engineering technology. I graduated with honours because of my hard working and dedicated attitude.

Petroleum Landman and Abstractor.

Camp Attendant / General Help/ Administration

I am diploma marine engineer Working in Amsa Total solutions Pvt Ltd., as Quality Control for the past three years. I have completed AWS-Certified welding inspector. I have also completed SMAW -4G Welding course. I'm dedicated & highly motivated to accept challenges & pursue perfection in work

A skilled technical professional with influential leadership and management skills. Proven ability to work in the office and work in the field.

B.E. Petroleum, Working in Workover Department

Exploration, Development, Workover, Deviated Well Drilling Supervisor

I'm a Registered Electrical Engineer and experienced Safety Officer for more than 10 years. Presently am working with a US based Drilling Company as Offshore Rig Based Safety Officer in Saudi for their offshore project. I hope with my experience and initiative, I would be able to contribute positive

Professional Geologist with petroleum exploration and hydrogeological environmental experience

Project Manager, Mechanical Engineer with 20 years experience in Gas Turbine Industry

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

Piping design engineer having 4 experience in ,PDS,CADWORX 2008 AUTOCAD 2008.

Power Engineer 3rd class

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 [ 137 ] 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out