Resume - I have worked in the drilling by more of one year and Develop my career as well ...

Misco Jobs

Resume #5025

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Develop my career as well planner engineer and Support in Surface Logging Systems, constantly learning and updating my knowledge. I also like teamwork because it's the proper way to reach the best results and our mayor objectives. I believe in knowledge, I think that the human being is always open to learn and grow in mind. That's why I always try to learn something from all my daily activities. I want to have the opportunity to work with you to demonstrate to my capacity of professional delivery and the greatness of a motivation outlined towards the success, within the principles of responsibility and honesty. Finally I want to show my availability to move to where it is required, field or another city always following the standards of industrial security and environment care. I try to protect and take care of the earth and nature because I love it; it's our home and our most precious legacy. I appreciate its attention and I hope consider to me for the coming processes of selection.

EDUCATION
America University, Bogotá, Colombia
Enero 1999 to December 2004, graduation day: 12th March 2004.
Petroleum Engineering

Experience
Employer: BAKER HUHGES INTEQ
Position: Well Planner Engineer
Place and Date: Bogota, August/2004 - Actually

Well Planner in Colombia wells, with handling in Advantage systems, Director, BHAsys and Compass-Landmark, special software for this activity.

Activities:
- Prepare pre-liminary directional profile for drilling feasibility.
- Planning and Design of BP directional well profiles, based on offset wells and according to client's requirements.
- Prepare proposal of detailed directional program for the Drilling Operations Team.
- Check well directional behavior on a daily basis. Provide additional support to the Operations Team on Directional drilling issues if required.
- Ensure that all lessons learned are captured, recorded and fed back into the well planning processes.
- Review and input into End of Well Reports-Directional Section.
- Ensure that directional programs and carried out in compliance with Client. HSE Standards and Policies.
- Daily basis to current wells and coming wells. (Update Surveys-Plots- Projections in Directional Software).
- Provide BHA Analysis simulations (Rock Index Calculations in Offset Wells), Torque & Drag (Generate Charts with the Actual Torque and Theorical Values), Hydraulics.
- Prepare BHA Performance by Run.
- Preparation of End of Well Reports within time stipulated by contracts and based on Well Planning & Engineering Competencies.
- Review Operating Conditions in the current wells.

Employer: BAKER HUHGES INTEQ
Position: Office Client Tech-Support
Place and Date: Bogota, August/2004 – Actually

Tech-Support, in the Surface Logging Systems. with handling in Advantage and RigLing Systems, in the Tangara Project with HOCOL S.A. and TOTAL.

Activities:
- Actualization of the information collected by the Mud Logging unit. (Lithologyc Reports as Formation Evaluation Log, others as, Drilling Data evaluation Log, Hole Condition Log, hydraulics, among others).
- Check the monitoring of the real time operation, during the drilling of the well through the software.
- Ensure that all lessons learned are captured, recorded and fed back into the well planning processes.
- Review and input into End of Well Reports-Geology Section.
- Ensure that programs and carried out in compliance with Client. HSE Standards and Policies.
- Daily basis to current wells and coming wells. (Update Plots- Reports in the office client).
- Review Operating Conditions in the current wells.
- Participating in the daily meetings of the client for report of the activity.

Employer: ECOPETROL S.A
Position: Student in practices
Place and Date: Bogota, November 2002 - June 2003

Evaluation of the bottom hole assemblies used in the directional wells in Cusiana and Cupiagua fields in BPO Colombia, with the propose of making and institutional memory that allows besides to document the techniques learned in these fields, wells drilled by Baker Hughes Inteq, to contemplate it's applicability in projects of Ecopetrol or associated.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8551 to 8600 of 10917)

Go to Search Parameters...

Brief Description

I am seeking a position in your esteemed organization, Hawk Petroleum Inc. for Sales, Marketing, Trading of Petroleum Products in South East Asia (Indi)

Hydroblaster

Proficient or familiar with a variety of engineering/design softwares and office tools including Flexcom, Mathcad, Autocad,Abaqus,FS2000, Windows, UNIX, Linux, Sun Solaris, Microsoft Office tools, Open-office tools, C,C++, Java, Fortran and Perl

Safety Professional

Cost Controller - B.Sc. Degree in Commerce Accounting Branch

Experience of leading a group of students at college level, volunteering and organizing various events at school and college level. Experience of working on rig.

I am flexible, reliable, company oriented, team player. I am fluent in French as well as English and I have learn Spanish.

Maintenance in PLC,DRIVES,Instrumentation Field

PETROLEUM (PRODUCTION ) ENGINEER

I began working in the oil and gas industry in 1993 at the age of 17. Since then I have worked very hard to continually improve my knowledge and abilities, and have recently been promoted to Production Foreman at the age of 31. All of my experience has been in offshore California.

Planning/Scheduling Engineer - Specilization in Primavera P3- Having 10years of experience in Oil, Gas, Refinery, Power & ME sectors worked under different Prestigious organisations like PDO, BP, QP, ADNOC, Bechtel, Snamprogetti, Sumitomo Corporation, HHI, etc - 6Yrs. in Planning & 4Yrs in Site(E&I)

I have wide experience in field of inspection for petroleum oil and gas project. With multi national companies using international standards and specification. I worked in middle east, Far East and Kazakstan. You can contect to any of company which I worked and confirm with them.

With more than 17th years of experience in performing design engineering and constructions on various facilities relating to Chemical Plant, Petrochemical Plant, Oil and Gas, Refineries, Commercial and Industrial Projects. Applies standard design principles and theories to complete assignments. Util

M.Sc Energy Economics and B.Sc Petroleum Engineering. Currently working as a Petroleum Economist, have a cumulation of 7 years in the Oil and Gas industry, 3 years + in the Upstream sector and 4 years in the Downstream Sector. Strong spreadsheet skills and intermediate level PEEP user.

Lead Instrumentation Technician

In 2002, I graduated with a Diploma in Marine Engineering. I worked as Marine Engineer on board merchant vessels and also in the shipyard as a Project Engineer. I stopped work to pursue my BEng. (Hons) in Mechanical Engineering. I am well versed in engineering softwares and EPCC procedures.

CHEMICAL ENGINEER

DEPOT OPERATIONS,LOGISTICS,ACCOUNTS RECEIVABLES/PAYABLE,PROCUREMENT-6YEARS

Bsc honours geophysics - geophysiscist

Electrical Power Engineer, fresh graduate

Degree in Chemical Engineering at the University of Pretoria. I see myself as an enthusiastic and disciplined person who will give his all in his career. I am very eager to learn to I am looking forward the opportunity of learning the inn’s and outs of industry

Experianace on CCTV, Load Monitoring Systems,Calibration of Equipments, Navigation and Communication Equipments

Seeking Production or Mechanical Engineer position in a prominent Company with a performance driven team-based culture.

Electronic/Instrumentation-based skills, good command in English, Computer literacy

Oil and gas lawyer with in-house experience

I work very well with little supervision, and am very good at completing tasks. I am looking for a career with a fast growing company, I have experience in a number of different areas, and am a very hard worker.

Highly experienced project professional with broad engineering, maintenance and construction experience. Competitive by nature with a consistent focus on the “Bigger Picture”. Outstanding track record and highly adept at managing high-criticality maintenance and construction projects.

Developed a Polypropylene laboratory single handed from scratch to an operational lab

Diploma in Mechanical Engineering with seven years experience of various projects such as: Oil Refinery, Petrochemical and Gas Plant Project, which involves on construction and inspection. wide knowledge on isometric drawing, Piping General Plan, Piping & Instrument Drawing and Process Flow Drawing.

PDMS designer(piping)/engineer

CAD DRAFTSMAN

I have done B.TECH from IIT ROORKEE....having experience of doing in Annealing Department for one year

B.E Mechanical (Rotating Equipment Design Engineer)

I want to pursue a career in the field of Industrial Automation. I also have interest in Industrial Manufacturing, Project Development and Process Control. I have interest in Programmable Logic Controllers, SCADA, A.C.Drives & DCS and thinking to develop skills & work in this field.

I have worked in the drilling by more of one year and Develop my career as well planner engineer and Support in Surface Logging Systems in Baker Hughes Inteq Colombia.

Work in a Petroleum company

Experienced telecommunications professional with key achievements, knowledge and abilities in the area of information technology, applications development and business systems.

Junior Petrophysicist and Well Log Analyst, Geophysicist

Over 7 years experience in Quality Control Inspection related to the Oil and Gas industries, of which 6 years have been spent in the Sultanate of Oman as a Senior Pipeline or multi-disciplined inspector, acting as a Third Party inspector on numerous onshore projects.

Telecommunications, programming, computers, networking, control systems, data communications

I have recently completed my masters in Petroleum Engineering. I have one year experience as a Mechanical Engineer. I have the expertise of cutting edge technology available in the field today. I would be quite willing to relocate internationally, if required.

Given In Resume Body.

Objetivo: aplicar en el área producción, perforación, estudio de yacimientos o petrofísica como Ingeniero de Petróleo.

Young enthusiastic Engineer (B.Tech Hons.;IIT - Kharagpur) just graduating with 120+ days of field experience in drilling , safety and scheduling. Good computer skills and a diverse course content in college.

I have 7 years experience onshore Australia with an accident free work history. I am a very safety conscious person looking for an international position to enhance my knowledge and experience in the oil industry.

Application for the post of Quality Assurance/Control Welding Inspector

I am Mechanical Engineer with first class career Record. I have 4 years Exp in the power Sector. I have Boiler Proficiency Certificate, which is essentials for Boiler Operation.

B. Tech. Chemical Engineer Diploma in Petrochemical technology 1 year Experience in Reliance Petroleum Ltd.

Experience in Collection and processing of Ground Control Points data using Geodetic quality GPS receivers and LGO(Leica Geo Office & TGO (Trimble Geomatics Office)

Procuring of Electrical & Instrumentation and Mechanical Materials/Equipment (Oil & Gas Projects)

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 [ 172 ] 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out