Resume - As Specialist Professional Engineer (Training Engineer)/Mechanical Training Inst...

Misco Jobs

Resume #50622

CONTACT INFORMATION:
View contact information...

Job Objective –

Seeking challenging assignment in the areas of oil and gas Mechanical maintenance/Teaching/ Technical Training with an organization of repute.
Years within the Oil and Gas fields, Petrochemical: 29 years

Key Qualifications: Work Experience Relevant to Assignment:

7+ years management experience with Al-Furat Petroleum Company –
As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (capacity and profile building, skill-transfer and counterpart training).

Managing on the job training activities in oil and gas fields in AFPC on a 28/28-day work cycle.

Duties cover providing basic science and technical training courses and hands on training to new trainees at training center at Deir-ez-zoir.

* Conducting classroom training: Topics covered
1) General English
2) Technical English
3) Basic Hand Tools and Equipments
4) General Drawing
5) Technical Sketching, use of technical manuals
6) Basic Electrical Protection
7) Static Equipments
8) Bench work
9) Machine operation skill
10) Basic Measuring Instruments
11) Maintaining Valves
12) Packing 'O' rings and Seals
13) Shafts and Couplings
14) Centrifugal and Displacement
15) Bearings & Lubrication
16) Trouble-shooting pumps, compressors, engines etc.,
17) Alignment

* In addition to the above-mentioned coverage, imparting classroom safety courses on the fields to fresh trainees. Normal duties include:

* Conducting tests and grading trainees' work.
* Creating and maintaining trainees' records including test results, attendance figures and progress reports.
* Preparing required training material
* Assisting in preparing modules
* Sending attendance and progress reports to OTF
* Preparing requisitions for the purchase of equipment, materials and supplies
* Preparing lesson plans and other course materials
* Improving staff competency standards as per company's vision &
Ensuring progress in CAS
* Preparing Nationals to replace contractors

This position includes creating competence development targets for individual staff, imparting technical training courses, field on the job training, monitoring, identifying technicians weakness and assessing progress against competence portfolio and reporting to head of training, assisting the line management to validate quality of training.

Developing graduate engineers, technical diploma holders and other existing staff in all fields within the company- carrying out competence assessments etc.,
AFPC accredited field assessor and competence accreditation panel member of AFPC-CAP since 1997.

9 years experience with Qatar General Petroleum Corporation, Qatar-

As mechanical technician Grade-I, I shouldered the responsibility of troubleshooting the problems and ensuring the smooth running of tank farm, terminal, offshore, Gas distribution system equipments during standby duty (off the duty hours).

Job involved: Mechanical maintenance activities in NGL, terminal, Tank farm, all gas points and offshore maintenance
Carryout planned and preventive maintenance, Major overhaul of the following equipment: Shipping pumps, engines, compressors, oil and gas pipe lines, Tank farm static equipments, mechanical machineries in Terminal, NGL utilities, gas distribution and Launches, Barges offshore systems. Miscellaneous oil field related equipment installation, removal, inspection, maintenance and repairing.

12 years experience with Madras Fertilizers Ltd, India as Mechanical Senior Technical Assistant

Worked in Ammonia, Urea, NPK Complex Fertilizers, Bagging plants in the capacity of
Senior Technical Assistant handling all types of pumps, compressors, steam turbines,
Governors, boilers, exchangers and miscellaneous equipments.
Chemco representatives had carried out all high speed rotating equipments overhauling
Until1980. Indian staffs were offered the task of servicing Synthetic gas compressor, air compressors of speed over 10,000 rpm.

I had been one of the rotating equipments national maintenance team since 1980, which
Successfully completed annual shutdown activities on the abovementioned equipments.

If you don't have a resume use the following information below as a template.

SUMMARY OF QUALIFICATIONS:
------------
Education

Institution: AAIDU-Allahabad-India- 211007
Date: from (month/year): July 2003
to (month/year): August 2005
Degree(s) or Diploma(s): Master of Business Administration (MBA) Major: Training and Development

Institution: The Institution of Engineers (India)-Kolkatta-700 020
Date: from (month/year): May 1973
to (month/year): November 1978
Degree(s) or Diploma(s): AMIE Mechanical EngineeringPower Plant engineering, Fluid power engineering, Industrial engineering.

Institution: CIT Sandwich Polytechnic, Coimbatore, India-641 014.
Date: from (month/year): June 1968
to (month/year): April 1972
Degree(s) or Diploma(s): Diploma in sandwich Mechanical EngineeringMajor: Machine shop Technology

OBJECTIVE:
------------
Seeking challenging assignment in the areas of oil and gas Mechanical maintenance/Teaching/ Technical Training with an organization of repute.
Years within the Oil and Gas fields, Petrochemical: 29 years

WORK EXPERIENCE:
------------
Date: Company: Position: Location:
Mar'97-May'03 Al Furat Petroleum Co, Syria Training Engineer / Mechanical Training Instructor -supervisorGrade C1, C2 Omar, Tanak, Thayyem,Deir-Ez-Zoir Training Center, Central W/ShopOil and Gas fields
Feb'96-Mar'97 Al Furat Petroleum Co, Syria Mechanical senior technician Tanak CPF, Workshop,Gathering outstations
May85-Mar94 Qatar General Petroleum Corporation, Qatar Mechanical Technician Grade-I GDS, NGL utilities, Tank farm, Terminal, Outstations, Jetty Offshore maintenance
Aug73-Jan85 Madras Fertilizers Ltd, India Mechanical Senior Technical Assistant Ammonia, Urea, NPK Complex Fertilizers, Bagging plants,Utilities (WTP, Boilers)
------------

EDUCATION & CERTIFICATION:
------------
Institution: AAIDU-Allahabad-India- 211007
Date: from (month/year): July 2003
to (month/year): August 2005
PG Degree: Master of Business Administration (MBA) 2 years course Major: Training and Development

Institution: The Institution of Engineers (India)-Kolkatta-700 020
Date: from (month/year): May 1973
to (month/year): November 1978
Degree: AMIE Mechanical EngineeringPower Plant engineering, Fluid power engg, Industrial engg

Institution: CIT Sandwich Polytechnic, Coimbatore, India-641 014.
Date: from (month/year): June 1968
to (month/year): April 1972
Diploma: Diploma in sandwich Mechanical EngineeringMajor: Machine shop Technology
Life Member of the Institution of Engineers – MIE (M 061719/3)
Life Member of The Indian Society for Training and Development –
Affiliated to IFTDO (S-2088/2004)

------------

ADDITIONAL INFORMATION:
------------
Passed Master of Business Administration course at the AAIDU- India (First division with honours).
Feb-Mar 2005 result ----(MBA3)
Management Information System =76%, Strategic Management = 91%, Managerial Control System =83%, Human Resources Management = 85%, Marketing Management-II = 79%, Financial Management-II = 79%, Operations Management-II=76%, Project = 92%. Average = 83% (First Division with Honours)
Studied 'Arabic' for 2 years in 'The Institute of Linguistic Languages' Doha, State of Qatar.
Attained supervisor certificate from National Productivity Council (NPC), India.
Driving License: Indian, International
Passport Number: F9645854 Valid up to 09-10-2016
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 10902)

Go to Search Parameters...

Brief Description

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

16 years of experience as a water treatment chemist in Power Plant.

17+ years, FEED, Engineering, Fabrication, Construction, Commissioning. Brownfield dev./Cap. Ex. Oil/Gas/Petrochemical/LNG/Mining

Drilling Fluids Engineer 38 years worldwide experience both in Field and Management

Extensive Cost Control experience gained over the last 25 years in the Oil Industry mainly in Drilling

Master Mariner

i attended petroleum institute nigeria after my school certificate i had ond in petroleum refining technology and higher diploma in chemical technology i worked in nnpc refineries in porthacourt warri and kaduna i can also work in petrocheical and gas processing plants

Civil Structural designer with over 20 years of experience in civil, structural, industrial, petrochemical onshore and offshore projects, infrastructure, and government projects.

Experience in foxboro and bailey DCS panel operation . i am working as panel operator in a big oilfield control room since 1993, i am the most suitable candidate for this post

Civil structural engineer, 14 years experience, familiarity with structural codes and finite elments software.

Well Services, Well Interventions, Completions

PhD in Geophysics, excellant in computer ,

Detail engineering as Performer/Area Lead; Material estimation, Proposal & Man hour estimation; Bid review, Vendor/Sub-contractor document review; Development of standards, spread sheets; Coordination with work share office/Client; Field engineering Support at site

A seasoned Security Manager with 20+ years of experience in Government service and Oil and Gas industry 15 of which was in Shell Nigeria. Strong field experience in Security Operations, kidnap & ransome mgt, risk surveys and assessment, cost control, loss prevention and incident investigation.

Goal-oriented QHSE manager with 18 years experience in organizational and project QHSE Management, In-house project Management and Audit Management including 10 years background of Piping and Pipeline Engineering in various industries under E, EP, EPCM or EPCC contracts.

Strong leadership and ability to work according by Company's Political and Procedures. Good understanding of Oil accounting Process. Supporting the branch Finance Manager on day-to-day compliance issues

I am a Chemistry graduate with 18 years of experience with NACE certificate as Corrosion Technologist

Over seventeen years of experience in the Oil & Gas Construction

18 years Project Construction Management/ Project Execution / Project Management Consultancy experience in the Industries like Refineries, Petrochemical and Oil Gas (Cross Country Pipelines, Booster Pump Stations, Gas, Oil Station, Up-Stream flow Lines) including Mechanical / Piping, Civil, Electric

Senior Piping Engineer - Stress Analysis / Material / Layout (18 years experience)

General Management (1300 staff), Sales devt, finance - International experience - Oil & gas, Distribution, civil eng.

Status Qualifications and employment history Education Foreign Languages

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Master mariner class 1 unltd, over 8 years command experince onboard large crude carriers. Over 40 spm mooring ops at various terminals including Lybia. Willing to gain expertise as mooring master in offshore oil industry.

I have high experience as production supervision at manufacture plants.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

post Engineer Senior Inspector – Painting / Coating & Insulation BGas / NACE –CSI [I] certified Painting Inspector. Experienced Thermal / Cryogenic Insulation Inspector Ref – Contract / Direct Hire- on Day rate basis with rotational cycle. Oil & Gas, LNG projects. Client side representati

SENIOR PANEL OPERATOR POSITION FOR PRODUCT TANK / JETTY AREA.

Sr. Electrical Designer with 15 yrs experiance including PDMS

15 year experience in international/ multicultural mid- and large scale oil & gas projects in polar areas of Russian Federation in both Contractor’s and Client’s role. Working to Russian and Western standards. Planning, risk management, cost control, certification for construction and commissioning.

My strengths lie im my ability to manage available resources and communicate with others

Expert in PDS Fameworks, Microstation, PDMS and bentley Structural Triforma

Civil/Structural engineer with 14 years experience in oil 7 gas industry

Well Test Engineer

Senior PDMS Piping Designer/Checker

With my dedicated experience as a Directional Drilling Supervisor for 14 years.I have worked in Western Canada, Mexico and Middle East.

Years of progressive and increasingly responsible executive assistant & office management

Electrical engineer with experience in oil and gas maintenance, installation, procurement, materials sales and marketing

Experience in 8 years in Mechanical seal industry, 7 years in Diesel engines and 1 year in fabrication industry

Thirty-five years of detail design / checking in the petrochemical / refinery and fertilizer engineering field. Piping work includes preparing detail design drawings, punch list during construction, material take offs, labor cost estimates, manpower estimated, developing P&ID drawings.

A professional individual with a strong background in health, safety and environmental research and policy implementation. An extensive career with experience in rig-operations and positions ranging from Floorhand to Directional Driller with an emphasis on loyalty and confidentiality.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

Qualified Hse Manager Wit Experience In Management Of Hse Aspects In Oil & Gas, Lng, Pipelines, Power Plants, Stp/Water Treatment Plante And Infrastructure. Worked In Most Of Critcal Oil / Gas Felds Like OMAN LNG, PDO (Oman); ADNOC, ADCO, ADGAS, ADMA-OPCO (Abu Dhabi). With Ph.D.In Management Of HSE

Instrumentation and control senior / lead engineer

Petroleum Engineer

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out