CONTACT INFORMATION:
View contact information...
Name: Donald Rawson Date: 12-10-06
Highlights of my education: High School, NACE 1 Coatings Inspector,, Associated Builders and Contractors Advanced Coatings Course INS General Pipe Line Certificate
Computer Experience Reports I am currently doing are on Excel. Basic knowledge of Word and Power Point.
Programs that are available on my computer 1 MS Word 1 MS Excel 1 MS Outlook
I do not have any problems traveling out of my local area?
I do not have any problems traveling internationally?
My current workload is (hours per week)? 70
My projected or forecasted workload (hours per week? 70
EQUIPMENT CATEGORIES I HAVE KNOWLEDGE OR EXPERIENCE IN
Equipment Code General Category Equipment Category
General Mechanical
1.01 X Boilers & Heaters
1.02 Castings / Forgings
1.03 X Heat Exchangers & Chillers
1.04 X Fittings & Flanges
1.05 X Fabricated Piping / Spools / Bends
1.06 X Pressure Vessels
1.07 X Structural Steel
1.08 X Tanks
1.09 Trayed Columns
1.10 X Valves
1.11 FRP/GRP Pipe and Vessels
Coatings: Inside (ID) and Outside (OD) Corrosion and Other Protective Coatings
6.01 Three-layer Polys
6.02 X Coal Tar
6.03 Fusion Bonded Epoxy (FBE)
6.04 Foams
6.05 X Epoxy's
6.06 X Concretes
6.07 Spray Polyurethane Foam (SPF)
6.08 Phosphating
6.09 X Impact/Abrasion Coatings
6.10 X Fiberglass
Expediting
8.01 X Desk Expediting
8.02 X Field Expediting
11.01 X Coordination
11.02 X Cost Control
11.03 X Document Control
11.04 X Engineering
11.05 X Estimating
11.06 X Logistics
11.07 X Materials Management
11.08 X Planning
11.09 X Procurement
11.10 X Scheduling
11.11 X Site Supervision
Equipment Category: PROJECT CONTROLS: 11:01, 11:02, 11:03, 11:05, 11:06, 11:07, 11:08, 11:10, 11:11.
Years of active experience with this Category: 25
Company Dates Details
Details of training in this Category:
Details of experience in hands-on performance of the manufacturing activities associated with this Category: Performance blasting and Coatings, Protherm Services.
Precision Progressive Technical, Services, Cameron Iron works, Tipco, Applied Coatings 1979 to 2006
Site Superintendent and General Foreman in various chemical plants and refineries in charge of maintenance, hard dollar work capitol projects and turnarounds. Managed and inspected blast and paint operations on offshore platforms. Ordered all materials need for the complete job. Assembled and hydro tested blow out preventers and deep water risers for for Cameron iron works.
Details of experience in performing surveillance activities associated with this Category: Performance blasting and Coatings, Protherm Services.
Progressive Technical, Services, Tipco,Applied Coatings, Cameron Iron Works. 1979 to 2006 In the various management, supervisory and inspection position I have held over the years I have attended many pre- job meetings, interacted with plant managers, owners, representatives of facilities, safety personnel, subcontractors, vendors of products I have purchased pertaining to the projects, set up projects, accounts and offices in and out of town locations as well as offshore locations.
List of national and international codes and standards I have applied in relation to this Category: Written, and followed many various specifications pertaining to specific projects utilizing standards and recommended practices as they related to the project. Actively involved in the estimation and execution of the projects. Expedited man-power and materials, managed subcontractors that assisted on the projects. Active member of NACE and SSPC with access to their web sights to download any recommended practices and standards as they pertain to any projects.
List of purchasers and/or projects to which equipment in this Category was supplied to Customers include: United States Oil Petroleum, Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcor, Texaco, Motiva, Sun Diamond Offshore, Ensco, Noble, T.D.I., Signal, as well as vendors and suppliers all over the United States.
List of current qualifications and/or certifications applicable to this Category: NACE 1 Coatings Inspector, NACE Bridge stamp, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE.
Equipment Category: GENERAL MECHANICAL 1:01, 1:03, 1:04, 1:05, 1:06, 1:07, 1:08, 1:10
Years of active experience with this Category: 20
Company Dates Details
Details of training in this Category:
Details of experience in hands-on performance of the manufacturing activities associated with this Category:
Performance blasting and Coatings, Protherm Services. Progressive Technical, Services, Tipco, Applied Coatings, Cameron Iron Works. 1979 to 2006 Site Superintendent, General Foreman and Foreman in various chemical plants and refineries in charge of maintenance, hard dollar work capitol projects and turnarounds. Assembled and hydro tested blow out preventers, and deep water riser pipes. For Cameron Iron Works.
Details of experience in performing surveillance activities associated with this Category: Performance blasting and Coatings, Protherm Services.
Progressive Technical, Services, Tipco, Plant painting and Maintenance 1979 to 2006 In the various supervisory positions that I have held. I have performed many functions in the mechanical fields. Assisted in the extraction and installation of exchangers as well. I have performed inspection blast on boiler tubes, inside pressure vessels, heaters, and towers utilizing various media material. I have rigged spiders and stages to many flare stacks, heaters, tanks, silos and offshore structures. I have also been responsible for my own general repair on all the equipment that is associated in the coatings industry.
List of national and international codes and standards I have applied in relation to this Category:
List of purchasers and/or projects to which equipment in this Category was supplied: Customers include: United States Oil Petroleum Reserve,
Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcore, Texaco, Motiva, Sun Oil, Diamond Offshore, Ensco, Noble, T.D.I, as well as vendors and suppliers all over the United States.
List of current qualifications and/or certifications applicable to this Category: NACE 1Coatings Inspector, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE.
Equipment Category: THERMAL SPRAY APPLICATION (TSA) OR METALIZING
Years of active experience with this Category: 3
Company Dates Details
Details of training in this Category:
Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.): Protherm Services 2001 to 2004 Supervised projects within the Exxon Mobil chemical plant and refinery. Applied this product to piping in the Protherm blast yard and field touch up after installation.
Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Protherm Services 2001 to 2004 Monitored, performed and inspected surface preparation, preheating and application.
List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): NACE #12/AWS C2.23M/SSPC-CS 23.00
List of purchasers and/or projects to which equipment in this Category was supplied: Exxon Mobil Oil and Chem.
List of current qualifications and/or certifications applicable to this Category: NACE Certified Coatings Inspector, SSPC-C3 Competent Supervisor Certification, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE and SSPC
List of prior qualifications and/or certifications applicable to this Category:
Equipment Category: 6:03 FUSION BONDED EPOXY
Years of active experience with this Category: 10
Company Dates Details
Details of training in this Category:
Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.): Echo construction, Performance Blasting and Coating 1990 to 2001 I have managed projects, inspected and performed repairs involving field touch up of fusion bonded epoxy.
Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Echo construction, Performance Blasting and coating 1990 to 2001 Inspection involving high voltage holiday testing.
List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): SSPC-SP2, SSPC-SP3,RPO188
List of purchasers and/or projects to which equipment in this Category was supplied: Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcore, Texaco, Motiva, Betz, Sun Oil, Onyx
List of current qualifications and/or certifications applicable to this Category: NACE Certified Coatings Inspector, SSPC-C3 Competent Supervisor Certification, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE and SSPC
List of prior qualifications and/or certifications applicable to this Category:
Equipment Category: 6:02 COAL TAR EPOXY
Years of active experience with this Category: 25
Company Dates Details
Details of training in this Category:
Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.): Plant Painting and Maintenance, Performance blasting and Coatings, Protherm Services. Meaux Services Inc. 1979 to 2004 Although coal tar epoxy has faded out in its value in the coatings industry due to its hazardous properties. I have managed, supervised, inspected, blasted off and applied this product to many water tanks, piping, flare stacks, barges, ships, general refinery and offshore equipment in the past. I have also set up, applied, supervised, managed and inspected a direct to earth secondary containment application utilizing a liquid CO2 injection as well as an injected non skid application (for concrete) with a modified coal tar epoxy.
Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Plant painting and Maintenance Performance blasting, Protherm Services. Meaux Services Inc 1979 to 2004 Managed projects, supervised projects, and inspected projects, as well as performed surface preparation and application activities.
List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): The following joint standards apply to the specifications of many projects that I have been involved with over the years relating to surface preparation associated with this product.
SSPC-VIS 1, SSPC-VIS 3, SSPC-SP 1, SSPC-SP 2, SSPC-SP 3, SSPC-SP5, SSPC-SP6, SSPC-SP7, SSPC-SP10, SSPC-SP13, SSPC-SP14.
In addition some of the following recommended practices have also been followed in association with this product as stated in the different specifications of the projects.
ANSI Z117-Confined space safety procedures
SSPC-PA1-Shop and field maintenance painting
ASTM D4414-"Blotter test" for compressed air
RPO287-Method for determining surface profile readings
RPO181-Internal coatings
ASTM D4414- Measurement of wet film thickness during application
SSPC-PA2-Messurment of dry film thickness
List of purchasers and/or projects to which equipment in this Category was supplied: Customers include: United States Oil Petroleum Reserve, Exxon, Exxon Mobil, Fina, BASF, Chevron, Premcore, Texaco, Motiva, Onyx, Diamond Offshore, Ensco, Noble, T.D.I.,.
List of current qualifications and/or certifications applicable to this Category: NACE 1 Inspector, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE.
List of prior qualifications and/or certifications applicable to this Category:
Equipment Category: 6.05 EPOXY
Years of active experience with this Category: 25
Company Dates Details
Details of training in this Category:
Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.): Performance blasting and Coatings, Protherm Services Tipco, Plant Painting and Maintenance. Meaux services inc. Applied Coatings Service. 1979 to 2004 I have managed, supervised, inspected, performed surface preparation and applied this product to many water tanks, piping, flare stacks, barges, ships, general refinery and offshore equipment in the past.
Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Performance blasting and Coatings, Protherm Services Tipco, Plant Painting and Maintenance. Meaux services inc. Applied Coatings Service 1979 to 2004 Managed projects, supervised projects, and inspected projects, as well as performed surface preparation and application activities.
List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): The following joint standards apply to the specifications of many projects that I have been involved with over the years relating to surface preparation associated with this product.
SSPC-VIS 1, SSPC-VIS 3, SSPC-SP 1, SSPC-SP 2, SSPC-SP 3, SSPC-SP5, SSPC-SP6, SSPC-SP7, SSPC-SP8, SSPC-SP10, SSPC-SP11, SSPC-SP12 SSPC-SP13, SSPC-SP14.
In addition some of the following recommended practices have also been followed in association with this product as stated in the different specifications of the projects.
ANSI Z117-Confined space safety procedures
SSPC-PA1-Shop and field maintenance painting
ASTM D4414-"Blotter test" for compressed air
RPO287-Method for determining surface profile readings
RPO181-Internal coatings
ASTM D4414- Measurement of wet film thickness during application
SSPC-PA2-Messurment of dry film thickness
RPO188-Holiday testing
List of purchasers and/or projects to which equipment in this Category was supplied: Customers include: United States Oil Petroleum Reserve, Exxon, Exxon Mobil, Fina, BASF, Total, Chevron, Premcor, Texaco, Motiva, Sun Oil, Onyx, Diamond Offshore, Ensco, Noble, T.D.I., Signal,Conoco. Apache Production.
List of current qualifications and/or certifications applicable to this Category: NACE 1 Coatings Inspector, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE.
List of prior qualifications and/or certifications applicable to this Category:
Equipment Category: 6:10 FIBERGLASS
Years of active experience with this Category: 25
Company Dates Details
Details of training in this Category:
Details of experience in hands-on performance of the manufacturing activities associated with this Category (e.g. welding, machining, assembly, etc.):, Performance blasting and Coatings, Protherm Services. Tipco. Plant painting and Maintenance. 1979 to 2004 I have managed, supervised, inspected, performed surface preparation and applied this product to many water tanks, Oil storage tanks, and vessels. Reinforced fiber glass liners, chop and hand lay.
Details of experience in performing surveillance activities associated with this Category (e.g. inspection, expediting, NDE, etc.): Performance blasting and Coatings, Protherm Services. 1979 to 2004 Managed projects, supervised projects, and inspected projects, as well as performed surface preparation and application activities.
List of national and international codes and standards you have applied in relation to this Category (provide full designation e.g. just "API" is not sufficient): The following joint standards apply to the specifications of many projects that I have been involved with over the years relating to surface preparation associated with this product.
SSPC-VIS 1, SSPC-VIS 3, SSPC-SP 1, SSPC-SP 3, SSPC-SP5, SSPC-SP11, SSPC-SP12. In addition some of the following recommended practices have also been followed in association with this product as stated in the different specifications of the projects.
ANSI Z117-Confined space safety procedures
SSPC-PA1-Shop and field maintenance painting
ASTM D4414-"Blotter test" for compressed air
RPO287-Method for determining surface profile readings
RPO181-Internal coatings
ASTM D4414- Measurement of wet film thickness during application
SSPC-PA2-Messurment of dry film thickness
RPO188-Holiday testing
ASTM D 3363 Hardness test
List of purchasers and/or projects to which equipment in this Category was supplied: Customers include: United States Oil Petroleum Reserve, Exxon, Exxon Mobil, Fina, BASF, Chevron, Premcore, Texaco, Motiva, Betz, Onyx,, Diamond Offshore, Ensco, Noble, T.D.I., Signal,
List of current qualifications and/or certifications applicable to this Category: NACE 1 Coatings Inspector,, Associated Builders and Contractors (Advanced Course), NCCER Pipeline General Operating Conditions Certification. I am a current member of NACE.
List of prior qualifications and/or certifications applicable to this Category:
View contact information... |